Sandpaper Caddy (wall mounted)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Sandpaper bins for 5" sanding discs
- Ocena
- 5 / 5
- Polubienia
- 285
- Pobrania
- 387
- Wydruki
- 1
- Wyświetlenia
- 2032
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
I designed this sandpaper caddy to be wall mounted with screws by default. If you have a Wall Control system, then I've also included an adapter pin that makes it compatible with that as well.
The label slug can be customized with text in PrusaSlicer, and I've included a MMU plate of ten common grit sizes to demonstrate how.
I printed the bin in PET-G with a brim, but it probably wasn't necessary. I didn't use any supports and it turned out fine.
Now I don't have to sift through a drawer full of discs, trying to find the grit paper that I need, and at a quick glance I can see what sizes I'm running low on.
I hope you enjoy this model and find it useful!