P1S/P1P flat screen raiser
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Saves a few centimeters of space
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 12
- Wydruki
- 0
- Wyświetlenia
- 177
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Other Printer Parts & Upgrades
- Licencja
- Creative Commons — Attribution — Noncommercial
I've recently upgraded to P1S and found out that it won't fit in my 3d printer cabinet. To remedy this issue I've switched the default power cable to an angled one and designed this screen riser which allows for saving a couple precious centimeters. Now I'm able to close the cabinet while printing which reduces the noise by A LOT.
The raiser snaps into place of the existing screen and has a slot at the back to pass the ribbon cable through. Can be mounted and dismounted without any tools. I recommend printing with the smaller side on the print bed as it makes the part stronger (XY-plane strength is higher than in the Z-axis).