Mysensors Newbie Dimmer and Motion case
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Here is my simple Motion and Dimmer case for the MySensors Newbie board with the dimmer module with snap fit…
- Ocena
- 0 / 5
- Polubienia
- 1
- Pobrania
- 8
- Wydruki
- 0
- Wyświetlenia
- 52
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution
Here is my simple Motion and Dimmer case for the MySensors Newbie board with the dimmer module with snap fit clasps.
The Newbie board can be found here: https://www.openhardware.io/view/4/EasyNewbie-PCB-for-MySensors
The dimmer board for the Newbie can be found here: https://www.openhardware.io/view/552/Dimmable-Led-Strip-board-MysX
M3 screws used to secure the Newbie PCB to the base. The Motion sensor is a press fit into the aperture. I was going to hot glue it, but found it wasn't necessary. YMMV with your printer's tolerances.
Thanks to @sundberg84 for the awesome PCB's.
The clearances are generous, and future revisions will reduce the clearances around the PCB's to help reduce the height.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Doesn't Matter
Supports:
Yes
.4 Nozzle
Infill:
15%
Notes:
Supports required around the motion sensor aperture.rn
Category: Electronics