Mysensors Newbie Dimmer and Motion case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Here is my simple Motion and Dimmer case for the MySensors Newbie board with the dimmer module with snap fit…
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 8
- Makes
- 0
- Views
- 52
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
Here is my simple Motion and Dimmer case for the MySensors Newbie board with the dimmer module with snap fit clasps.
The Newbie board can be found here: https://www.openhardware.io/view/4/EasyNewbie-PCB-for-MySensors
The dimmer board for the Newbie can be found here: https://www.openhardware.io/view/552/Dimmable-Led-Strip-board-MysX
M3 screws used to secure the Newbie PCB to the base. The Motion sensor is a press fit into the aperture. I was going to hot glue it, but found it wasn't necessary. YMMV with your printer's tolerances.
Thanks to @sundberg84 for the awesome PCB's.
The clearances are generous, and future revisions will reduce the clearances around the PCB's to help reduce the height.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK3
Doesn't Matter
Supports:
Yes
.4 Nozzle
Infill:
15%
Notes:
Supports required around the motion sensor aperture.rn
Category: Electronics