NEOECO airbrush desk stand
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Screws to table, can also hold just an air line alone
- Ocena
- 5 / 5
- Polubienia
- 27
- Pobrania
- 298
- Wydruki
- 4
- Wyświetlenia
- 844
- Oceny
- 4
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial
I got an inspiration around, seeing how other holders are being designed and I mashed some of those ideas together. My new NCT-SJ81 airbrush has a MAC valve right bellow the cup so the holder needs a cut out there, something what most other solutions didn't offer. I also implemented this air line holder, which helps nicely while you're disassembling and cleaning your airbrush.
Sized for a desk thickness up to 25mm.
You can safely use PLA here and if your printer has too much tolerance, you can glue the holder into its stand with a bit of glue.
As always: 3mf is PrusaSlicer flavored, uses supports and modifiers, if you want to use a different slicer, I recommend to check the file in PS first.