NEOECO airbrush desk stand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Screws to table, can also hold just an air line alone
- Rating
- 5 / 5
- Likes
- 27
- Downloads
- 299
- Makes
- 4
- Views
- 846
- Reviews
- 4
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
I got an inspiration around, seeing how other holders are being designed and I mashed some of those ideas together. My new NCT-SJ81 airbrush has a MAC valve right bellow the cup so the holder needs a cut out there, something what most other solutions didn't offer. I also implemented this air line holder, which helps nicely while you're disassembling and cleaning your airbrush.
Sized for a desk thickness up to 25mm.
You can safely use PLA here and if your printer has too much tolerance, you can glue the holder into its stand with a bit of glue.
As always: 3mf is PrusaSlicer flavored, uses supports and modifiers, if you want to use a different slicer, I recommend to check the file in PS first.