Liczymy pasujące modele…
This elegant, compact (15cm tall) folding dice tower takes up very little space on your gaming table, and is easy to store and transport. Two versions are available, with or without magnets. The version with magnets (requiring four 8x2…
These simple and compact holders may support Scenario reference, Act and Agenda cards, with a tray for doom and clue tokens. They can also be used with any board game featuring american-sized cards. Print two large holders and one small…
This organizer is designed for the box format of the revised edition of the game (core set or extension). Supports sleeves and vertical storage. ❌ WARNING ❌ This insert is not compatible with the latest edition of the game (2026)! For…
February 2026 update: I finally received the Marine Worlds expansion, and I can now confirm that my insert is compatible with it! I have published a Zoo card dispenser designed to replace the long card deck holder in this insert, so feel…
All models must be printed once. No supports needed. My print settings: 0.6mm nozzle Layer height 0.4mm infill 15% The token holders for the Mythos tokens are another design of mine:…
It's easy to print, with brim and without supports. I recommend a 0.2mm layer height.
This set of 24 deck holders is designed to be used as dispensers for your card games or board games. They are compatible with the most common card formats, including American or European sizes, and can accommodate sleeved cards. A notch…
These tokens were primarily designed to mark the exhaustion of cards and to mark actions. The diameter of these tokens is the same as the smallest tokens in the revised edition. Note that the inner symbol is 0.3 mm higher than the top…
This file for Fusion 360 is a parametric token holder. It allows you to create a token holder in two parts, which can hold a cardboard token with only one side visible. It can be used for any board game with single-sided tokens to which…
This container has shifted notches that allow the full contents to be seen while providing perfect sturdiness. The ribbed screw cap allows for reliable and easy opening and closing. Holds up to 45 chips. Easy to print. I recommand a layer…
Printing this standee base can be a little tricky, your printer must be perfectly calibrated. If the counter is stuck and won't rotate, reduce the extrusion multiplier by 1 or 2%. This standee base has been designed for Gloomhaven but…
This deck box consists of two identical card holders that fit together. When clipped together, they form a sturdy carrying case that effectively protects your cards. Unclipped, they are two handy card holders that you can use in your…
It supports standard sleeves and vertical storage. All models must be printed once.
To print the chair, you need to activate the organic supports in your slicer and paint the supports on the underside of the top two legs. You must also enable the “Support on build plate only” option. You should have this sliced model: My…
You could say that Maquis is a board game too small to benefit from an organizer. I don't think so. This insert / organizer contains the core game and its expansion and allows a very fast setup, you just have to take the two trays out and…
A friend of mine who was missing this part for one of her pieces of furniture asked me if I could provide her with some 3d printed. She provided me with one as a model. I accepted the challenge! The modeling wasn't very complex, but…
I don't like turning cards to mark their activation, which is why I designed this thematic token. I designed this token to achieve good results with a 0.4 mm nozzle, but I think a 0.25 mm nozzle is optimal. I recommend activating the…
The js500's insert layout is excellent, but I don't really like large trays which I find heavy and filament consuming. So I redesigned the setup tray to be lighter. It uses 20% less filament and 20% less printing time (4 hours with a…
This stand has been designed as a kit for a print without supports. You just have to put a Front side on a Back side, and slide them into a Base. Insert your investigator card in the stand. Done! My print settings: 0.4mm nozzle 0.2mm…
My solution for making a custom deluxe edition from a retail version and for a quick setup. Some tips: Magnets are neodymium 8x2mm. Tray2 must be printed twice. The saber tray must be inserted sideways to fit the slot in the thermoformed…
Layer height : .3mm. You must activate supports in your slicer to print it.
May be printed in PLA or PETG.
There are some excellent board game counters available in Printables, but none of them have all the features I wanted: Small size Easy to print and assemble (only four parts, five with the optional stand); no glue, tools or fasteners…
This deck box consists of two identical card holders that fit together. When clipped together, they form a deck box that may contain the 150 unsleeved Development cards of the game. Once unclipped, they are two handy card holders that you…
Insert & Organizer for Paladins of the West Kingdom . Not suitable for cards with sleeves (sorry!). Card holder must be printed twice.
Some features: Vertical storage Supports premium sleeves (I use Arthur & Excalibur sleeves from Paladin; the width of the sleeves for the minicards must not exceed 48mm). Fast setup The markings in the slots of the deck holder indicate…
My remix of the nice model from Desktop Makes. My main addings: The base of the cottage can accommodate a flameless candle (diameter 38 mm) Windows! A single layer of transparent filament (crystal) provides semi-opaque windows, for a…
This insert allows very fast setup, vertical storage and supports sleeves. It replaces the thermoformed insert supplied with the game. I personnaly use Paladin sleeves. My print settings: 0.4mm nozzle 0.2mm layer height 10% infill No…
There are many versions of this game, I'm not sure if this organizer will fit them all. Check the inside dimensions of your box (310x220x70mm). Does not support sleeves. Supports vertical storage. Player tray must be printed four times,…
This insert allows very fast setup, vertical storage and supports sleeves. It replaces the cardboard insert supplied with the game. I personnaly use Paladin sleeves (Bors). The game's cards are contained in two convertible deck boxes. A…
There are many other Book Box models available on Printables, but I wanted to try something a little different. The model is a single piece. No assembly or gluing required, simply snap the spine into the cover and you're good! (please…
This insert is designed to fit into the Ashes Reborn: Rise of the Phoenixborns Master Set box. Space has been reserved for the Chimera board from Red Rains: The Corpse of Viros and the three manuals. This insert supports sleeved cards,…
After many attempts, I think I've found the perfect design. The knurled knobs provides a good grip and there are no nuts it can't crack! I strongly recommend using PLA+ and the largest nozzle you got. Prints without supports. Print…
Please note that the tray doesn't fit in the box insert. I recommend a .2mm layer height. This is a part of my insert for John Company 2 : https://www.printables.com/model/718520-john-company-2-insert-organizer
Helpful in keeping the tiles neat and organized during play. Printed with a 0.6mm nozzle (layer height 0.4).
Compatible with many brands (ICE Filament, Amazon Basics, Filament PM…) I highly recommend using PETG to print this clip. PLA is not flexible enough to withstand insertion into the spool without breaking. Layer height: 0.2mm Infill: 100%
With this vertical stand the Old Ones become more threatening and you can track their health. It has a small footprint on the board.
I don't really like having to turn the portal card in Skytear horde, I find the handling clumsy with the tokens stacked on the card. So I designed this thematic token. Don't forget to move it counter-clockwise! You can also use it as a…
There are many editions of this game, so I strongly advise you to check the size of your box before printing this insert. The internal dimensions of the box must be 222x172x49mm. This insert has been designed for a fast setup. Thus, the…
I thought this adorable little dog designed by MatthiasL would make a perfect decoration for the paper towel holder kit I designed. All the models are hollow for a fast print and a light structure. If you want a holder for paper towel,…
This compact box with a sliding lid can hold all Hero Realms material published to date and supports sleeved cards. Removable dividers prevent rows of cards from collapsing when you remove cards from the box. My print settings: 0.4mm…
This dispenser can hold all your Zoo cards (including those from the Marine Worlds expansion) during and between your games. If you are using sleeves, please ensure than your stack of sleeved cards does not exceed 15cm in length. I use…
There are some great SD card holders on Printables, but in my opinion they all have the same flaw: they don't protect SD cards enough, especially those mounted on top of the printer, near the spools. So I designed this holder with a…
As the box for this boardgame is unconventional, so are the trays in this insert. You must print Cards.stl and Standees.stl twice each. Vertical storage is supported. Sleeves are supported, except for siege cards.
This organizer for Skytear Horde may contains all the content of the core box and its expansion Nupten & Utsesh or all the contents of the Monoliths standalone . Premium sleeves (maximum length 92mm) and vertical storage are supported.…
I had never heard of this game before stumbling across it on Printables. It's an excellent brain-teaser, quite difficult. To my knowledge it has never been distributed in Europe. Print settings: 0.4mm nozzle (a larger nozzle is not…
This box may contain: Shards of Infinity Shards of Infinity: Relics of the Future Shards of Infinity: Shadow of Salvation Shards of Infinity: Into the Horizon The card tray is removable for an easy access to the cards. The space between…
if you're not as lazy as I am, you can print them in the same color as the nozzle. :) Print settings: 0.6mm nozzle 0.35mm layer height 25% infill
A benchy is no longer much of a challenge for a well-tuned modern printer. But a benchy inside a Christmas bauble? That's another challenge! This model allows you to test the cooling and the overhang capacity of your filament (protip:…
There are many things to remember during a game of Hero Realms. This token allows you to have one less thing to remember if you are playing a cleric. A dozen should be more than enough. My print settings: 0.4mm nozzle 0.2mm layer height
Printed with 0.3mm layer height.
This magnetic dice box can hold 4 x 20-sided dice up to 20mm in size. The icosahedral supports give the dice a perfect stability which allows you to use them as counters and save their values between your games. Notches on the sides of…
This insert allows fast setup, vertical storage, and replaces the cardboard insert. No lid lift. It supports sleeves (I personnaly use Paladin sleeves, if you use other brands please check the dimensions), please note that I did not put…
They are slightly larger than the originals and can be grabbed more easily in the bag.
This is a insert for the retail version of the board game only. There is no room for the double-layered boards and the miniatures but it fits the Directives and Alien-Relic mini-expansions. It also supports sleeves and vertical storage. I…
This insert is intended for the first edition of Circadians: First Light. It facilitates installation and vertical storage. No lifting of lid. It does not support any extension or sleeves. Printed with a 0.6mm nozzle (0.4mm layer height).
A book box with a message that is more necessary than ever! The model is a single piece. No assembly or gluing required, simply snap the spine into the cover and you're good! (please note that once snapped, they are very difficult to…
This insert allows very faster setup, vertical storage and supports sleeves (I personnaly use Paladin sleeves). It can contains the core game, its two expansions (Commanders & Bermuda Triangle) and the New Figureheads promo. No lid lift.…
This flexible cable tie printed with TPU securely holds a bundle of cables with a diameter between 15 and 35 mm. It is designed to easily achieve optimal tension by taking advantage of the flexibility of TPU. Loop it around the bundle…
I wanted a simple, perfectly stable, lightweight stand that provided easy access to the navigation buttons for my Samsung Galaxy Tab S9 FE. It should fit all tablets around 11 inches in landscape orientation. My print settings: 0.4mm…
These deck boxes can hold the decks of your favorite investigators, so you can store them between games and transport them safely. As an added bonus, once opened, they transform into handy card holders for your draw and discard piles. To…
This box has been designed to hold a set of my custom The Lord of The Rings LCG tokens: https://www.printables.com/model/243263-lord-of-the-rings-lcg-token-set The writings on the side are those on the One Ring. You need eight 8x2 round…
This insert for John Company 2 completely replaces the thermoformed insert supplied with the board game. It was designed to be as light as possible, weighing no more than 500 grams (I don't like inserts that are too heavy :) ). It…
This convertible card box is made up of two identical card holders that fit into each other. When clipped together, they form a sturdy case that effectively protects your cards, and which you can take everywhere with you or include in…
The size of the board is 210x120.3x7.6mm. I don't like dry-erase markers for this purpose (I find them messy). So I designed this challenge to only use a mere sheet of 110x70mm paper. The sheet is held tightly between the removable…
To wszystkie aktualnie dostępne wyniki.
