1 / 4
SD Card holder with hinged lid for Mk3S
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
SD card holder with hinged lid for Mk3(S+) for up to four cards
- Ocena
- 5 / 5
- Polubienia
- 15
- Pobrania
- 64
- Wydruki
- 3
- Wyświetlenia
- 203
- Oceny
- 3
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Accessories
- Licencja
- Creative Commons — Attribution — Noncommercial — Share Alike
There are some great SD card holders on Printables, but in my opinion they all have the same flaw: they don't protect SD cards enough, especially those mounted on top of the printer, near the spools. So I designed this holder with a hinged cover to protect your precious cards. It's low profile enough to not interfere with spool handling.
I printed mine in PETG but PLA should be ok too.
Print settings:
- Perimeters: 3
- Layer height: 0.3mm
- Nozzle: 0.4mm
- Infill: 15%
I recommend to print the inside top of the lid with organic supports, as in my picture :
