1 / 4
SD Card holder with hinged lid for Mk3S
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
SD card holder with hinged lid for Mk3(S+) for up to four cards
- Rating
- 5 / 5
- Likes
- 15
- Downloads
- 64
- Makes
- 3
- Views
- 203
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
There are some great SD card holders on Printables, but in my opinion they all have the same flaw: they don't protect SD cards enough, especially those mounted on top of the printer, near the spools. So I designed this holder with a hinged cover to protect your precious cards. It's low profile enough to not interfere with spool handling.
I printed mine in PETG but PLA should be ok too.
Print settings:
- Perimeters: 3
- Layer height: 0.3mm
- Nozzle: 0.4mm
- Infill: 15%
I recommend to print the inside top of the lid with organic supports, as in my picture :
