51 modeli
This is a Cute Dragon figure. There are 2 versions available: vanilla and with already built-in supports. Supports were carefully added manually and thoroughly tested. Recommended print settings layer height: 0.2 mm infill: 5% gyroid…
This is an egg. The dimensions of the egg are 43 mm x 43 mm x 55 mm, which corresponds to a standard chicken egg. Works well as an Easter decoration or nest training egg. Recommended print settings fill density: 10% brim: yes perimeters:…
This is a Squintsworth Glasses Holder. It works well with any glasses or sunglasses. Looks great on a desk or night stand. Recommended print settings layer height: 0.2 mm infill: 10% gyroid perimeters: 3 supports: no Prepared files…
This is an easy-to-print, modern Christmas tree. Looks really well as a winter decoration. It can be printed in vase mode as well as standard mode. Recommended print settings vase mode: yes bottom solid layers: 7 extrusion width: 1 mm…
This is an articulated dolphin - Clipper. It is flexible, requires no supports, and was designed to be printed in place. Recommended print settings layer height: 0.15 mm infill: 10% gyroid perimeters: 3 supports: no The fin should be…
This is a first layer calibration test for any printer. It consists of 5 identical tiles. Recommended print settings layer height: 0.2 mm fill angle: 0° perimeters: 2 skirt: 0 first layer speed: 25 mm/s It should be centered on the bed…
This is a case for Raspberry Pi 3 Model A+ and Raspberry Pi 1 Model A+. The dimensions of the case are 72 mm x 60 mm x 20 mm. It consists of two parts (a base and a lid) and has been designed to be fully covered with only cutouts for…
This is a Lady Beatrice Squintsworth Glasses Holder. It works well with any glasses or sunglasses. Looks great on a desk or night stand. Recommended print settings layer height: 0.2 mm infill: 10% gyroid perimeters: 3 supports: no…
This is a logical puzzle game of medium difficulty. The goal of it is to put the ball in one hole, so that it pops out of the other. You solve it, by turning the cube, so the ball inside moves along the path. It can be played from both…
This is a set of chess pieces originally designed by Herman Ohme in 1953. Models were made with the most careful reproduction of the original design and taking into account the easiness of printing. The height of the tallest figure (king)…
This is a bowl, which is designed to be printed in vase mode. Thanks to its wavy-spiral structure, it is very rigid and durable. Recommended print settings vase mode: on extrusion width: 1 mm layer height: 0.2 mm solid bottom layers: 5…
This is a Low Poly version of a Cute Dragon figure. Recommended print settings layer height: 0.2 mm infill: 5% gyroid perimeters: 3 supports: organic This model requires supports. It is recommended to use organic supports placed on the…
This is a puzzle game called Soma Cube invented by Piet Hein in 1933. It consists of seven different polycubes. All pieces made out of unit cubes must be assembled into a 3×3×3 cube. In case of problems, take a look at a completed cube,…
This is a bunch of magical crystals on a stand, designed for glow-in-the-dark filament. Recommended print settings layer height: 0.2 mm infill: 10% honeycomb perimeters: 4 solid layers: 5 seam position: aligned Print the stand with a…
This is a pack of Rubik's Cube stands, which fit standard 56 mm Rubik's Cubes. This package includes 4 variants, based on triangles. Stands are designed to be printed in vase mode. Recommended print settings vase mode: yes extrusion…
This is a collection of scary badges that can be printed with a glow-in-the-dark filament and used as a Halloween decoration. Recommended print settings layer height: 0.2 mm infill: 20% gyroid solid layers: 5 perimeters: 2 seam position:…
This is a calibration cube based on Kostka3D's logo. The dimensions of the cube are 20 mm x 20 mm x 20 mm. The indentations are 1 mm deep. On the opposite side of each wall are small letters indicating X, Y, Z axes. Recommended print…
This is a sign with a “In case of fire: git commit…” text. It is designed for printing with a color change mid-print. Recommended print settings layer height: 0.2 mm infill: 20% gyroid solid layers: 5 perimeters: 2 seam position: aligned…
This is a Bat-Symbol from the first Batman movies. Originally, it was designed to be printed with glow-in-the-dark filament. It gives a nice, movie-like effect, which looks like a sign from Bat-Signal seen in movies.
This is a simple and minimalistic desk organizer. It has several slots that can be freely used as needed. Recommended print settings layer height: 0.2 mm infill: 10% gyroid perimeters: 3 solid layers: 6 supports: no Ironing can be used on…
This is a pack of coins. It contains coins with a face value of 1, 2 and 5. Coins sizes: 1-valued (diameter: 23 mm, height: 1,64 mm), 2-valued (diameter: 21,6 mm, height: 1,94 mm), 5-valued (diameter: 24 mm, height: 1,9 mm). The…
This is a Radioactive sign for printing with a color change mid-print. Recommended print settings layer height: 0.2 mm infill: 20% gyroid perimeters: 2 seam position: aligned Color change should be applied mid-print, after main plate.
This is a tie rack for mounting on flat surfaces. Tie slots are 46 mm wide. This rack fits 4 ties. Version for 8 ties is available here . Recommended print settings layer height: 0.2 mm infill: 15% gyroid perimeters: 3 solid layers: 5…
This is a button in the shape of a piece of cheese. It is designed for color change on last layers. Recommended print settings layer height: 0.2 mm fill density: 100% seam position: rear Color change should be applied on last layers.
This is a simple mechanism that allows you to wind lines of different types quickly and efficiently. Works great in the workshop or as a winder for a kite. It assembles as shown in the attached video. Recommended print settings layer…
This is a graduation cap, also known as mortarboard. It is fairly easy to print. A small hole can be added in the middle for a graduation tassel. Recommended print settings layer height: 0.2 mm infill: 0% perimeters: 2 solid layers: 5…
This is a sign with a toxic warning. It is designed for printing with a color change mid-print. One from Warning Signs collection. Recommended print settings layer height: 0.2 mm infill: 20% gyroid solid layers: 5 perimeters: 2 seam…
This is a planter that appears to be made of styrofoam. Thanks to its bubbly structure, it is extremely durable. Recommended print settings layer height: 0.2 mm perimeters: 3 solid layers: 5 supports: no infill: lightning seam position:…
This is a sign with a radioactive warning. It is designed for printing with a color change mid-print. One from Warning Signs collection. Recommended print settings layer height: 0.2 mm infill: 20% gyroid solid layers: 5 perimeters: 2 seam…
This is a sign with a “HOT” warning. It is designed for printing with a color change mid-print. One from Warning Signs collection. Recommended print settings layer height: 0.2 mm infill: 20% gyroid solid layers: 5 perimeters: 2 seam…
This is a directional nozzle for air humidifiers. Thanks to it, steam comes out in desired direction. Works with these humidifiers: Malatec 16404 Powermat PM-NPO-4W Caruzzo ULTRASONIC-JS1802 Recommended print settings layer height: 0.1 mm…
This is a sign with a high voltage warning. It is designed for printing with a color change mid-print. One from Warning Signs collection. Recommended print settings layer height: 0.2 mm infill: 20% gyroid solid layers: 5 perimeters: 2…
This is a button in the shape of a hexagon. Recommended print settings layer height: 0.2 mm fill density: 100% Works nice with fuzzy skin for outer perimeters.
This is a sign with a biohazard warning. It is designed for printing with a color change mid-print. One from Warning Signs collection. Recommended print settings layer height: 0.2 mm infill: 20% gyroid solid layers: 5 perimeters: 2 seam…
This is a bookmark in the shape of a piece of cheese. It is designed for color change on last layers. Recommended print settings layer height: 0.1 mm fill density: 100% seam position: rear Color change should be applied on last layers.
This is a sign with an explosive warning. It is designed for printing with a color change mid-print. One from Warning Signs collection. Recommended print settings layer height: 0.2 mm infill: 20% gyroid solid layers: 5 perimeters: 2 seam…
This case fits HRD-B3X module with 4000 mAh battery. The dimensions of the case are 67 mm x 100 mm x 22 mm. It consists of two parts (a base and a lid) and is designed to be glued together. It is fully covered with two cutouts for…
This is a Biohazard sign for printing with a color change mid-print. Recommended print settings layer height: 0.2 mm infill: 20% gyroid perimeters: 2 seam position: aligned Color change should be applied mid-print, after main plate.
This is a sign with a fire warning. It is designed for printing with a color change mid-print. One from Warning Signs collection. Recommended print settings layer height: 0.2 mm infill: 20% gyroid solid layers: 5 perimeters: 2 seam…
This is a sign with a caution warning. It is designed for printing with a color change mid-print. One from Warning Signs collection. Recommended print settings layer height: 0.2 mm infill: 20% gyroid solid layers: 5 perimeters: 2 seam…
This is a sign with a gears warning. It is designed for printing with a color change mid-print. One from Warning Signs collection. Recommended print settings layer height: 0.2 mm infill: 20% gyroid solid layers: 5 perimeters: 2 seam…
Bring a spark of fantasy to your desk or shelf with this charming 3D-printable dragon figurine. With its expressive eyes, detailed scales, and playful stance, it’s a fun project that prints beautifully and makes a great display piece,…
This is a customizable handle for a wheelbarrow. It was designed for rod with a diameter of 30 mm. It may as well work as a handle for other uses. If needed, there is attached an .f3d file, where you can customize it to the desired rod…
This is a sign with an atomic warning. It is designed for printing with a color change mid-print. One from Warning Signs collection. Recommended print settings layer height: 0.2 mm infill: 20% gyroid solid layers: 5 perimeters: 2 seam…
These are replacement buttons for Nice Smilo SM4 remote control. Recommended print settings layer height: 0.2 mm perimeters: 2 solid layers: 5 supports: no seam position: aligned
This is a pack of cart tokens. It contains tokens with a face value of 1, 2 and 5. Tokens sizes: 1-valued (diameter: 23 mm, height: 1,64 mm), 2-valued (diameter: 21,6 mm, height: 1,94 mm), 5-valued (diameter: 24 mm, height: 1,9 mm). The…
This is a collection of scary signs that can be used as a Halloween decoration, designed for printing with a color change mid-print. Recommended print settings layer height: 0.2 mm solid layers: 8 perimeters: 2 seam position: aligned…
This case fits HRD-B3X module with 4000 mAh battery. The dimensions of the case are 67 mm x 100 mm x 22 mm. It consists of two parts (a base and a lid) and is designed to be glued together. It is fully covered with two cutouts for…
This is a tie rack for mounting on flat surfaces. Tie slots are 46 mm wide. This rack fits 8 ties. Recommended print settings layer height: 0.2 mm infill: 15% gyroid perimeters: 3 solid layers: 5 supports: no Optional modifications Spans…
This is a logical puzzle game of hard difficulty. The goal of it is to put the ball in one hole, so that it pops out of the other. You solve it, by turning the cube, so the ball inside moves along the path. It can be played from both…
This is a Dolphin Seaside Ornament, which is a 3D scan of the actual statue. It prints very nicely and gives an interesting effect. Recommended print settings layer height: 0.2 mm infill: 5% lightning perimeters: 3 solid layer: 5…
To wszystkie aktualnie dostępne wyniki.
