P
Printablesgia
Hansgrohe sink aerator wrench
Wrench to take the aerator out of the front so you can clean it.
- Pobrania
- 153
- Polubienia
- 12
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
Printablesgia
Mid-Century Modern-esque Coat Rack/Coat Hook
Was inspired by some mid-century coat hooks so I made this one. Mounts to the wall with a cleat. Screw the cleat to the wall, then add a set screw to the bottom. FreeCAD sources included, you can customize the details (including hook…
- Pobrania
- 97
- Polubienia
- 26
- Ocena
- 0
P
Printablesgia
Torch Wall Bracket (Bernzomatic TS4000)
Matches taper on torch body to hold securely. Torch snaps into and out of holder. Mounts to wall or whatever you care to with three #8 screws (I used simple plastic wall anchors). The source ViaCad model is included, though I didn't…
- Pobrania
- 93
- Polubienia
- 14
- Ocena
- 0
P
Printablesgia
Modified C64 case hinges, fit between existing posts
Looks like there's many different revisions of the C64 breadbin rear snaps/hinges. I wanted a version of banman's design that fit between the vertical supports of my machine, as I'd prefer to limit grinding and modifications to the case.…
- Pobrania
- 80
- Polubienia
- 7
- Ocena
- 0
P
Printablesgia
Mini lathe chuck key holder
Tired of not having a place to store your mini-lathe's chuck key? Glue this to the back of your machine and never worry about it again! Improves safety as well - you'll never be tempted to temporarily leave the key in the chuck. Bore…
- Pobrania
- 75
- Polubienia
- 12
- Ocena
- 0
P
Printablesgia
Mazda RX-8 Fan Knob Repair
My 2004 RX-8's climate control fan knob broke right on its stem. Cost of a new one is like fifty bucks! Gluing it back together is difficult because of the small surfaces and the fact that it's HDPE. So I made this little adapter that…
- Pobrania
- 68
- Polubienia
- 4
- Ocena
- 5
P
Printablesgia
Caster Wheel adapter for IKEA Adils Table leg
Wanted a rolling light workbench for crafts so I modified my IKEA Adils table leg to add some office chair wheels I picked up at Home Depot (7/16 stem). The adapter is held on by the original pad. The adapters are quite a tight fit (I had…
- Pobrania
- 67
- Polubienia
- 12
- Ocena
- 0
P
Printablesgia
Anycubic Photon Mono X Tool Hanger/Holster
Holder for tools that came with my Anycubic Photon Mono X. Holds: Putty knife Squeegee 3 allen wrenches Held in place with three wood screws, I think #6. I thought it looked like a face so I added an eyebrow version because it makes me…
- Pobrania
- 61
- Polubienia
- 10
- Ocena
- 5
P
Printablesgia
QNAP QSW-308-1C 19-inch rackmount shelf
A rack shelf for your QNAP switch. I hesitate to call this a "rack mount" because it's just a shelf - not a hard mount. But it works more than well enough for me. Pictured mounted on my LACKRACK. Also holds the power brick and has a…
- Pobrania
- 57
- Polubienia
- 5
- Ocena
- 0
P
Printablesgia
Datsun 1600 Badge (Mad Max, Doof Warrior costume)
I'm making a Doof Warrior guitar from Mad Max. One of the items on the guitar is a Datsun 1600 badge, which I replicated from some photos I found online. It might be a few % off in size but the shape should be close. I include 3 versions.…
- Pobrania
- 46
- Polubienia
- 3
- Ocena
- 0
P
Printablesgia
Anycubic Photon Mono X Power Supply Bracket
Couple brackets for the Anycubic Photon Mono X's power supply. Print 2. Install screw through bracket, there's a hole for a screwdriver. Recommend scaling up maybe 2-3% because I made it too tight. Screws are #6. Print Settings Rafts: No…
- Pobrania
- 45
- Polubienia
- 22
- Ocena
- 5
P
Printablesgia
1/2" PVC Pass-Through Bulkhead/Hanger
Quick 1/2" PVC pipe bulkhead. Needed a version with a pass-through hole. Mounts with four #8 screws. Very slight taper on the inside surface so you shouldn't need to fuss with printer tolerances too much. Banana for scale. 1.100"…
- Pobrania
- 36
- Polubienia
- 9
- Ocena
- 0
P
Printablesgia
Digital Caliper Holder (Mahr version)
Just a version of the caliper holder that can hold calipers from Mahr. The original won't fit Mahr calipers due to their slightly different geometry. Category: Tool Holders & Boxes Original source: https://www.thingiverse.com/thing:685261
- Pobrania
- 33
- Polubienia
- 2
- Ocena
- 0
P
Printablesgia
AOC I2757Fh Monitor VESA Adapter
Bolts to a VESA mount (I used #10-24 bolts and nuts). Monitor's factory mounting post fits into slot. Can turn mounting plate upside down to elevate monitor a bit more (though you'll likely need to use a right-angle HDMI connector in that…
- Pobrania
- 32
- Polubienia
- 0
- Ocena
- 0
P
Printablesgia
Wizpig Trophy (Diddy Kong Racing)
My sister and I wanted to play some vs. races in Diddy Kong Racing, but found our save file was gone. So we sort of just beat the single player game. In one sitting. To commemorate the occasion, I ripped the Wizpig Trophy out of the game…
- Pobrania
- 22
- Polubienia
- 1
- Ocena
- 0
P
Printablesgia
David Clark Mic Adapter (Use M-77 mic on H10-76 headset)
My David-Clark aviation headset came with an old-school carbon mic (M-87) that made it tough to use with modern gear. So I bought an unamplified electret mic (M-77) from David-Clark and designed this adapter for it. I opted to keep things…
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
Printablesgia
Tractor Seat guitar accessory (Mad Max, Doof Warrior)
This is part of the Doof Warrior guitar (yes, the body of the guitar is indeed a bedpan in the movie). It looks like a tractor seat but I'm pretty sure it isn't actually. Provided in a thin STL (rescale Z to desired size) if you want to…
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 0
P
Printablesgia
Leeds and Northrup Galvanometer (Mad Max, Doof Warrior)
Part of Coma's (Doof Warrior's aka flamethrower guitar guy's) guitar. These are Leeds and Northrup galvanometers, modeled from high-resolution pictures found online. Coma has 2 of these on his guitar. I kept some parts separate for ease…
- Pobrania
- 18
- Polubienia
- 5
- Ocena
- 0
P
Printablesgia
Chair Caster Bushing Repair (Mayline/Staples TSM2BB)
Bushings give out on these. Here's a replacement. Print solid or close to it. Chair in question: https://www.amazon.com/Mayline-TSM2BB-Mid-Back-Arm-Chair/dp/B00368Y6DA Mine disintegrated after a while in PLA. Consider something with…
- Pobrania
- 18
- Polubienia
- 0
- Ocena
- 0
P
Printablesgia
Canon Typestar 220 Paper Advance Knob (either side)
My Canon Typestar 220 is missing one of its knobs. So I made one. Fits on either side. FreeCAD source, STEP file, and STL render included. Let me know if you make one or make any modifications!
- Pobrania
- 15
- Polubienia
- 1
- Ocena
- 0
P
Printablesgia
Anycubic Wash & Cure 2.0 Power Supply Bracket
Power supply for my wash & cure station. Use #6 screw. Print Settings Rafts: No Supports: No Category: 3D Printer Accessories
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
Printablesgia
Lathe Quick-Change Tool Holder Holder
For the A2Z CNC quick-change toolholders. Features a countersunk hole for a #6 wood screw. This is the toolpost in question: http://lmscnc.com/2461 It may fit other holders. The dovetails are about an inch at their widest and are at a 60…
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
Printablesgia
Oldschool ASUS toolless drive rails.
Wanted to add a 5.25" drive to my old beige box ASUS case… but had no more toolless slides. So I made these sliders. They don't lock though. You can use them as-is and just accept that the drives can be pulled forward (they stop the drive…
- Pobrania
- 14
- Polubienia
- 0
- Ocena
- 0
P
Printablesgia
Alfa Romeo 4cyl Nord Cylinder Sleeve Hold-Down
Holds down your liners while you work on the car. (only tested on a Spider 2000). Don't expect it to hold up while you're using the starter, but should work fine for hand cranking. There's two versions - a full version for big printers,…
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
Printablesgia
Horn Sprocket Brace Thing (Mad Max, Doof Warrior)
I don't know what to call this. There's a piece of a sprocket between the horns on Coma's guitar. Here it is as an STL. It has bolts on it and stuff. ¯_(ツ)_/¯ Category: Props
- Pobrania
- 11
- Polubienia
- 0
- Ocena
- 0
P
Printablesgia
Rostock Max V2 Aux Side Fan Mount, Adjustable, Retractable
I'm turning my Rostock Max V2 into a super speed printer, which means I need some serious part cooling. I've got a Berd-Air up top but sometimes need some extra air, so I added a couple fans beside the bed. Just use normal PC 80mm fans.…
- Pobrania
- 10
- Polubienia
- 0
- Ocena
- 0
P
Printablesgia
EEVBlog 121GW Accessory Clip
Got tired of having my banana and alligator adapters rolling around everywhere. So I made this. Printed in delicious ProtoPasta High Five Blue to match the meter and be all sparkly. Category: Tool Holders & Boxes
- Pobrania
- 9
- Polubienia
- 2
- Ocena
- 0
P
Printablesgia
Alfa Romeo Wiper Switch Retrofit (5-terminal)
For those hoping to avoid spending a lot of money (relatively) to fix a broken 5-terminal wiper switch (not sure which years have it, my car is a '74 2000 but it's been through some rewiring even before I got it). Please see the AlfaBB…
- Pobrania
- 6
- Polubienia
- 0
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.