Liczymy pasujące modele…
BTT EBB36 Umbilical Strain Relief for Stealthburner Works both as a mount for the BTT EBB36 on the Steathburner CW2 but also has strain relief. Mix of two other makers models. Requires two m3 heat inserts 3 versions - 58mm, 65mm and 70mm…
DIN bracket for Meanwell LRS-350 -- DIN Rail Bracket https://www.printables.com/model/97222-din-rail-bracket By Fabian I modified to accept the 4mm SHCS - the holes are not exact but it works on the LRS-350 with some patience.
Modified all versions of BastR Bambu Lab Side Spool holder incorporating the Filament Guide from ktothestank Bambu X1 & P1P - Side Filament Holder. I used the long bed screws that were removed from the bed when unpacking the X1 Carbon to…
Modified the DIN bracket found in the Voron 2.4 Design - to mount to LRS-350 and clips to a 35mm DIN rail. M4 - 8mm bolts I tried to use the spring style DIN mount found on printables but the spring was not strong enough to hold the PSU…
Breaking Bad Calibration Cube 30x30mm
Mini Stealth Burner - Bambu Lab Hot End Mount Remix of two models to fit the bambu labs hot end into the Mini Steathburner Attribution to: Voron Stealthburner Printhead for Bambu X1C/X1 Hotend by Kuna Voron 0.2 Revo Micro Mount by matthew_
BTT SKR PICO Mount for DIN Mounting Added port labels and it mounts to a DIN Rail bracket made by Fabian https://www.printables.com/model/97222-din-rail-bracket I used standard M3 bolts – had to drill out the pcb holes on the SKR PICO and…
Remix of parts of two main board boxes. This is set up to hold SKR Mini E3V3, RPI, U2C Canbus and LM2596 Buck Converter Mount holes are at 2.80mm so should self tap M3 Holes on the right of the case are for M5 Heat Inserts RPI fan is for…
Modified to include ridges on the side so when its slipped on the power supply it stays in place both horizontally and vertically. If you print to use and try to slip the cover from above you will break the side tabs. For best use, slide…
Afterbearner the Prusa Bear Afterburner (StealthBearner now) Voron Tap X-Carriage Modified Voron Tap MGN12 carriage to work on Afterbearner the Prusa Bear Afterburner (StealthBearner now) X carriage by @sebastian Voron Tap >>…
Modified X-Carriage for Voron Stealthburner Toolhead Severely bastardized x-carriage for this wonderful Prusa Bear Linear Rail mod by @Thehead Starting parts for the carriage mod came from @Sebastian - I used his carriage he made for the…
Unconventional use of Stealthburner on i3 style printer with EBB36 canbus. EBB36 can be mounted on back of Stealthburner but Z height is lost. Modded this EBB36 side mount for Stealthburner to preserve Z height.
Prusa Bear Linear Rail MGN12H Voron Tap X-Carriage Modified Voron Tap MGN12 carriage to work on Prusa Bear Linear Rail mod by @Thehead Voron Tap >> https://github.com/VoronDesign/Voron-Tap Integrated belt tensioner by @humebeam…
Swiffer Wetjet Wallmount V2 taller
Mixed three models to get the desired Raspberry PI 3 DIN Bracket. sized to use four M3 bolts to mount the Pi Bottom case to the Pi Din Bracket. Attribution to: Raspberry pi DIN rail mount by B&B TECH…
Prusa Bear Linear Rail MGN12H Mini Afterburner X-Carriage Bastardized in tinkercad - x-carriage for Mini Afterburner derived from @sebastian's VRN-10s Pro Mod for Cr-10s Pro - carriage.
Prusa Bear Linear Rail MGN12H X Rail Bottom Belt Modified X rail mounts to support Voron Tap Remix: https://www.printables.com/model/389714-prusa-bear-linear-rail-mgn12h-voron-tap-x-carriage Voron Tap >>…
Mod for Prusa Bear - Using SKR Mini E3 V2.0 and RPI Poorly modded by myself in Tinkercad. I added the alignment notch for mounting to the back of the 2040 and then I also expanding the mounting holes to accept heat inserts. I didn't…
Loved this model so much I wanted more…… ( Thank you Jéjé l'ingé @Jejelinge_724355 ) So I added: Sound Module to play the famous movie clip audio Barrel plug for power on the back side rather that side These are the items I used to make…
Modified the Voron 2.4 Mini 12864 LCD housing to work with the following conditions Using the Prusa Bear Y idler bracket Using SiggiePop's slightly altered versions of the Voron Trident skirts…
CNC Workstation I was using a small tablet to run my New Carve 1045 from CNC4Newbie.com and while it worked just fine the screen was a tad small. Through the forums at OpenBuilds a forum user there showed me his set up and I copied it as…
Prusa Bear Linear Rail MGN12H Dragon BurnerX-Carriage References: https://www.printables.com/model/30729-prusa-bear-linear-rail-modification-with-single-ra…
AIO Mini CR-10 Control Box ALL IN ONE CONTROL BOX I didn't like the CR-10 control box so I made an all in one box out of a mix of wood and 3d printed parts. I have a CNC machine so I used the box gadget in Vcarve Pro to make the baltic…
Drawer System for AMS Stacking Stand Remix I made these drawers from a user who had a parametric drawer system. I scaled them to take the place where the AMS system would sit. There is room for build plate storage too. There are build…
Display Rocket Bumble Bee Inspired - Dude Perfect Ordered a product from McMaster Carr and it came in this shipping tube. I repurposed the shipping tube to a static rocket display.
Created this little clip to screw to window jamb extensions vs. having to rip boards for the jamb extension slot on Andersen American Craftsman Series 70 windows from Home Depot. These work on the Awning and Casement style windows.. Maybe…
To wszystkie aktualnie dostępne wyniki.
