Liczymy pasujące modele…
I made this pallet rack for my RC 1/14 Lesu Forklift. It’s built more for function then scale looks. It has (5) rack positions. The rack is held together with M3 X 12 or 14 pan head screws. This rack will hold a bit of weight and is very…
This is based on the pallet that comes with the Lesu Forklift. Its 90mm x 90mm. I was able to print this without supports. I did add a 6th beam to help fill in the gaps. Basically more flat surface. This prints in 2.15 hrs with settings…
This is based on the pallet that comes with the Lesu Forklift. Its 90mm x 90mm. I was able to print this without supports. I did add a 6th beam to help fill in the gaps. Basically more flat surface. This prints in 2.15 hrs with settings…
I found this awesome design by Plastic_Innovations and made a few tweaks. I shrunk it a bit to better fit the Yeti 32oz cup. Its not a snug fit which allows room for something slightly bigger. I installed this in my 2016 gemcar and…
A pad for the transponder to sit on that is forward but in a safe spot. You can use the stock screw or get 2mm longer screws.
I made this to hold my MTM PF22 Foam Cannon on the wall. Its a nice fit. Hold the cannon perfectly. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/07saqFackRt Print Settings Printer Brand: Prusa…
There are 2 sized, 12awg and 14awg I tested these using 12awg Deans Wet noodle, 12awg Hobbywing, 14awg Ruddog wire. Hobbywing being the thickest.
If you are looking to use and interior with the MFC. This is a cover for your interior to be placed over the MFC-01 or MFC-03 to hide the wires. 1.25mm thick. You can use thin double sided tape to attach it. Two versions, if you have the…
Simple Tamiya BBX stand that sticks to the buggy using exsisting holes in the chassis. This allows for one handed shelf placement. Low profile too. Printed at .30 and .5% infill. 2hrs 17mins to print.
Tamiya XV02 Rally Car Stand. This stand is low profile and will attach to the chassis. Make it easy to place on your shelf. Res .30 Infill .10 Printed at 90 degree angle. Just over 2hrs to print
Add magnets to your GCM Racing J2 Skeleton Chassis with China JK body for quick and easy removal. Holds great. I also added an area for the on/off switch to go. Can be trimmed if not needed. You will need to drill 4 holes in your chassis…
Tamiya Speaker mount for Actros Tractor. I changed the oritation to fit the Actros as the Actros cab opeing is different. I also made it thinner, 2.5mm vs 4mm. I added more clearance for the speaker and it was hitting the sides before.…
Simple Wall Mount to hold the Greenworks 40Volt Blower. The blower just slides in. About 10hours to print. This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/lfCs7avPZTH Print Settings Printer Brand: Prusa…
Westernsharpies ScaleAccessories 3D printed winch straps bracket. This is done in 3 pieces to cover the entire length. Used on the Tamiya flat bed trailer. They can be glued on with super glue. Printed with Prusament PLA Galaxy Silver. If…
Cen Racing Ford Puma Rally car stand slotted to fit the chassis. Printed at .30 and .5% infill.
This tool holder I made for the Klein Tools 32751 Switch drive handle. I purchased DDM Allen (Hex) Hardened Steel Drivers - Set of 5 (2,2.5,3,4,5mm). I needed something that could hold the extra long tips. This thing was made with…
This is a plate that goes in the Tamiya Actros/Arocs switch box. This secures the Beier USB connector for updating your SFR-1 and the Beier on/off switch. There are 3 files that allow you to customize what you need, The holes are 5mm.…
I made these seat backs for when you flip the seat to fit a 6" driver. Flipping the seat makes the driver fit better but leaves the back open.
Prints in 54mins. Fits perfect into the RC4WD 1.55 Dirt grabber tires. These add support to the tire. The stock tire with stock foams fold over with nothing on the trailer. Add a vehicle to the trailer and the tire is flat. I did cut…
Wall holder for a Flysky FS-ST8 radio. Print time is about 1 hr.
I made this to help protect the screen on the ISDT BG-8S, I normally store my ISDT BG-8S in my charger bag and noticed marks on the screen and wanted to protect it. Plus I thought I could mount it on the wall if need be too. This way it…
Wall mont for Goat Charger Ebike
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/bEGoGUia5zG I made this as I got tired of it falling over in my cabinet. You can mount it to a wall or under a shelf. It holds the foam gun perfectly.…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/j28ETLLWCEi Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: Yes Resolution: .10 Infill: 50% Filament: Prusament PETG Black Notes:…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/b387eG2qqzx Print Settings Printer Brand: Prusa Printer: i3 MK3 Rafts: No Supports: No Resolution: .10 Infill: 20% Filament: Prusament PETG Black Notes:…
To wszystkie aktualnie dostępne wyniki.
