Liczymy pasujące modele…
Made dat_dakota_guy17's design a little taller, so that I did not have to remove the foot off the stock Vyper filament spool holder Used the free Microsoft 3D Builder program on Windows 10 to modify his design. I split the part in two,…
Thought it might be good to have perforated upper plate risers for the V400 for better ventilation. I wrote a little OpenSCAD file to create lines of cylinders as hole punches, and used Microsoft's free 3D Builder to edit the original STL…
Modified to make front panel thinner for Yaesu mic stud. Modified to make pocket deeper to make room for rack mount screw behind mic stud. Remixed from CB/Ham Radio Mic Holder Remix II:…
Not sure if this is a good idea or not, so think about whether or not to you want to take the risk of using this. USE THIS AT YOUR OWN RISK! You could shock yourself attempting to install it. I used it with a LED bulb that does not get…
Building JohnJacky's enclosure for the V400. To increase cooling air flow, use these sides with the ventilated version of JohnJacky's risers: Perforated Upper Plate Risers…
Flsun V400 is heavy enough that it should have six squash ball feet instead of three. I hacked Lepresean's single squash ball feet to have double squash ball feet. I printed them out of PETG, with 50% infill, for strength
Simple 3D print to encourage laundry soap to better drain from the container. Included the OpenSCAD source so you can modify it as needed.
Side rails for AnyTone AT-D578UV, and Yaesu FTM-400 (probably also FTM-100) Do not use too long of screws, or you may damage or destroy your radio! Side rails are 8mm thick. Rails are tall enough to leave an air gap under the radio. I…
Side rails for old Yaesu FT-100 mobile HF/VHF/UHF Radio. NOT for modern FTM-100 UHF/VHF mobile radio. Side rails are 8mm thick. They are tall enough to leave an air gap under the radio. Printed with PETG, 20% infill, on Prusa MK2. Used…
Side rails for Anytone AT-778UV dual band HAM radio. Since radio has only one mounting screw on each side, I designed in a plastic shelf to keep the radio stable on the side rails. It looks like the radio uses 5mm mounting screws. I've…
OpenSCAD source files for 100mm x 100mm VESA mount using M4 hex nuts. Can be used to add VESA mount to other designs Includes OpenSCAD source file for a ‘cutter’ object, which you can use with subtractive modeling to make holes in a model…
Protective Slipcover for AnyTone AT-D878UV Plus DMR HT. Noticed the front of my Yaesu FT-2D was getting scratched up, so I designed slipcovers for my HTs to protect the LCD displays when you put them into a backpack. Now, I don't have to…
3D printed holders for Yaesu FT-70D, Radioddity GD-77, and Yaesu VX-5R HAM radios There are multiple versions of the Yaesu FT-70D holder, one with a larger base (feet). I first designed these using Moment of Inspiration, then I redesigned…
Shelf bolts between my AnyTone AT-578 radio rails to protect and hold Yaesu FT-1500M that I use for packet radio. Side rails for AnyTone AT-D578UV, and Yaesu FTM-400 (probably FTM-100)…
RV Pantry Slide Lock - lock the RV pantry slides so that they do NOT open while driving My wife and I were irritated by our RV's kitchen pantry slides opening up, and throwing food across the floor, especially when a glass jar of pickles…
Designed new front mount for our "Milk Crate" from Home Depot on Lectric Bike XP 2.0 I used the rear mount from "thing:4964679", but the front mount would not work with our crates: Milk Crate Mount Lectric XP 2.0 Rear Rack eBike…
Modified Malolo's screw-less / snap fit Raspberry Pi 4 Case for ARGON40 mini fan Used Microsoft 3D Builder to hack Malolo's Raspberry Pi4 top, Top_Base_SM_Cam_Disp to make room for the Argon40 mini fan
Designed some simple knife scabbards for a Juvale Cleaver, and for a Dexter 8 inch Chinese style Chef knife. OpenSCAD source code is included. I printed mine out of PLA+, but I would probably recommend using PETG
Protective Slipcover for Yaesu FT-2D and FT-3D HTs. Not sure if it also fits the FT-5D or not. Noticed the front of my Yaesu FT-2D was getting scratched up, so I designed slipcovers for my HTs to protect the LCD displays when you put them…
Designed plastic parts to replace the cheesy terminal posts on my Astron SS-50M power supply. One of the setscrews (or its threaded socket) is stripped. So I used OpenCAD to design plastic parts for a traditional 3/16” bolt lug nut…
Simple base you can bolt to a WWII Flameproof ARMY J-5-A Morse Key to keep it from tipping over. I used three 20mm long x 3mm flat head screws and three nuts to secure the key to this base. I printed mine out of black Voxel PLA+ on my…
Added 100 mm VESA mount feature to grajohnt's hamclock case. My mods hold 4M hex nuts. You should probably glue them in, so that they don't come loose and fall into the electronics. I designed the 100 mm VESA mount bosses and nut holders…
Designed a plastic shelf cap to support a radio on top of a Jetstream JTPS32MAB Power Supply. Printed it with PLA, and it has held up fine so far.
Plastic mount for the switch supplied with heated BattleBorn lithium RV batteries to enable thermostatically controlled battery internal heaters. I used heavy duty double sided tape to secure it to a battery. I printed it with PETG, 0.20…
You are better off using the original design, and getting the shoulder bearings that Toolson used! I see I posted photos of the original design I used meshmixer to fill the 6mm holes in the X-axis belt tensioner from toolson. I used the…
Updated large hatch to hold power supply (PS) with shelf to hold PS, bolt on ‘strap’ to secure PS, and slot for wires to pass. Updated all hatches to have recesses for hex nuts, so that you can just insert screws into hatch from inside…
Spherical tip for Nagoya NA-771 dual band HT antenna The original antenna tip went missing, so I designed this one using OpenSCAD Used a bit of foam tac glue to secure it on the antenna. Printed in PETG in about 3.5 minutes on Flsun V400.…
Escutcheon and Grommet to tidy up hole and antenna wires from Pepwave mimo antenna I mounted on our RV
I was getting a wacked out display during the Setup Wizard on my MK3S printer. Thought I'd try adding a ferrite around the LCD cable to see if it went away. It did. Used OpenSCAD to design a simple mount to hold a ferrite on the ribbon…
To wszystkie aktualnie dostępne wyniki.
