Liczymy pasujące modele…
Printer: FDM Material: PLA Layerhight: 0,3 Infill: 10% Walls: 3 Support: non Standard parts: DIN 934 - M4 - nuts 3x DIN EN ISO 4762 - M4 - screw 3x Fits for TM P90 midcap mags. May you have to scale the model for other brands.
Strain relief for the Longer LK5 pro. No supports. M3x25mm hex screw →2x M3 nuts →2x Zugentlastung für den Longer LK5 pro. Keine Stützstuktur nötig. M3x25mm Imbusschrauben 2x M3 Muttern 2x
Printer: FDM Material: PLA Layerhight: 0,3 Infill: 10% Walls: 3 Support: none Standard parts: DIN EN ISO 4762 - M4x10 Made for a workshop wall with holes. The distance between the holes is 15,5mm.
Standard parts: Ø5mm withe LED Batteriebox 2x AAA 1,5v Switch The actual model is printed with a 70% scale with an SAL printer and high clear resin. An Ø5mm hole was drilled in the bottom of the model to glue the LED in place. Normteile:…
Wallmount for Makita eccentric sander, with two folders for used and new sandpapers.
Spool holder for the Longer LK5 pro at the top bar and filament guide. Print head will touch the spool if you print parts with tal hight. You can use a longer threaded rod to avoid. Spolhoolder can be placed on bouth sides. Standart/…
Printer: FDM Material: PLA Layerhight: 0,15 Infill: 10% Walls: 3 Support: non Standard parts: M4 Moldet Inserts Switch 2xAAA bateriebox 1,5v M4 Nut M4 Srew 6x Ø8x3mm magnets Ø3mm LED A Stand for the Batman Helmet with LED Lighting. The…
Longer LK5 for SD Card adapter. Adapter: https://www.amazon.de/dp/B06XX5GZTG?psc=1&ref=ppx_yo2ov_dt_b_product_details Standart parts: M4 T-nuts 8x M4x12 hex srew 6x (protektor and guide) M4x10 hex srew 2x Longer LK5 für SD Card Adapter.…
Tupperware freez container lid holder. To hold lids from tupperware freez container. In diverent hights. 4 lids fits in the 35mm hight version.
Ein Ornament, wofür auch immer. Zb. für den vorderen Radlauf eines Mofas oder Motorrads. Das Ornament hat eine Ø7 Tasche am unteren Ende, wenn verklebt.
Big thanks to ss3dprintingBE for inspiration. Printer: FDM Material: PLA Layerhight: 0,3 Infill: 10% Walls: 3 Support: only required for the grips and accelerator Standard parts: DIN EN ISO 4762 - M3x15 → Grip 5x DIN EN ISO 7046 - M3x5 →…
Printer: FDM Material: PLA Layerhight: 0,3 Infill: 10% Walls: 3 Support: for Gallow outer part Standard parts: DIN EN ISO 4762 - M3x6 → Motor 1x Standard 3mm UV LEDs → Gallow inner part 8x Slow turning 7v DC motor Power adapter ca. 3,7V…
The mask is smoothed as good as I can. For a good finish, you still have to do some sanding work. The bottom is hollow and will be filled with concrete. After completion, I recommend gluing a fleece on the concrete surface to protect your…
A printed holder to clam a chisel. It is adjustible like a normal Plane by tapping the front and the rear site. The models are named after the chisel width. For every width you need a chipbreaker with the same diameter. I recomend to do…
Printer: FDM Material: PLA Layerhight: 0,3 Infill: 10% Walls: 3 Support: for main body You can screw the bolts directly in the plastic, but i recommend to cut it first with a tab. Its obvius, but use stainless standart parts.
To wszystkie aktualnie dostępne wyniki.
