Liczymy pasujące modele…
For the flat models, print flat-part down, Organic supports, supports on build plate only. For the Skadis models, print flat/skadis down, with either: Organic supports, supports on build plate only. I have an MK4s and set “Overhang…
Holds attachments for Dewalt DCE100 mini blower. Locks into the main hose assembly at base. Printed with 4 perimeter walls, 40% infill using Carbon Fiber PETG. This thing takes a beating, so at the very least reinforce the attachment pegs…
A wall-mounted holder for the 8BitDo Pro 2 Controller, Pro+ and SF30 Pro. Attach with 2 sided tape
The mount was not big enough for my T-Mobile gateway, so I embiggened it for the "FAST 5688W" model. Printed with 40% infill and fuzzy-walls in PETG. I suggest mounting one side into a stud and the other with a wall anchor. You could…
For hanging an N64 controller on the wall. I removed the Skadis holes on this one to mount with 2 sided tape. Print with 2 arms pointed up, with snug supports
has a 15.5mmx16.5mmx2.2mm cutout to accommodate for feet. The 16.5mm is front/back to make space for the front panel of the enclosure. I used paint on supports, and then chose “automatic painting” printed in PLA with a 25% infill, on 20mm…
This is a simple mount for a PSVR (1) break out box. I printed it in PLA using regular settings, 20% infill, flat side down with supports. There's no screw holes since I used double-sided tape to mount
An under desk holder that has room for 3 Schiit components, and the spacers I have also remixed to accommodate feet. I have a regular one, and 2 with circular cutouts for Ikea-style mounts (pictured). Will work with LINMON and VIKA AMON…
I image a lot of machines, then ship them out. This clip allows me to attach a keyring to the USB so I never again forget to remove it.
Can be printed without supports, but I needed a 3mm brim to keep it from coming off the print surface. I printed with 20% infill, with modifiers at the screw holes to have those at 70% for more strength.
Print with standard settings, .02 Structural, no supports needed. I printed mine in matte black PLA.
holds a Schiit Modi, Loki, and Magni, with 20mm of space above to allow passive cooling. Printed in PLA using organic supports
Screw-mounted wall holder for replacement filters for 18V Makita XLC02 vacuum.
Used this plus Skadis Filament Spool Holder by mst4stny to mount all 5 filament on a SKADIS wall mount.
This loop holds a reusable aluminum pint glass and allows you to carry it around with a caribiner. Perfect for Telluride, RockyGrass, Folks Fest and Planet Bluegrass Festivarians. Print in TPU, 4 walls, 15% infill
Mount a bike tail light directly to a bike seat. Useful for a kid's seat that is all-the-way down, so a post-mount solution won't work. Printed in ASA
I made this when I was mounting a Hemera to my Ender 3 with a custom print head mount so I could easily measure print head and probe offsets. Layer height .32. Line width .2mm. Lines are 2 wide, so all lines are .4mm wide total and spaced…
I've included a 2 and 3 color model. The 2 color is for printing in black and white. The 3 color is for black, white and glow in the dark. The glow in the dark filament I have is translucent, so it needs a white behind it, or the black…
To wszystkie aktualnie dostępne wyniki.
