Liczymy pasujące modele…
Filament: PETG Infill: 60%/Gyroid Perimeters: 6 Layer: 0.2 1/7/24 Added a double hook version 1/13/24 Updated to have a nub that holds the hook tighter to the glass. (Not pictured)
It is not a perfect fit and playing with the scale should get it snug. I have included the files so you can remix it to your own liking.
Long hook for your towel or whatnot. Both models have a small nub that holds it tight to the glass. Filament: PETG Infill: 60%/Gyroid Perimeters: 6 Layer: 0.2
You will need to slice it in the Prusa slicer. I tried using the pegs with the slice but I ended up cutting them off. Gluing it together worked really well. 13" x 2.875" x 2" (330.2mm x 73.03mm x 50.8mm) .20 layer thickness 15% infill
This hook fits on 9.65mm thick shower glass and it is 55mm long. Filament: PETG Infill: 60%/Gyroid Perimeters: 6 Layer: 0.2 1/7/24 Added double hook version 1/13/24 updated to have a nub that holds the hook tighter to the glass. (not…
Made to replace the broken release button on the vacuum debris container. Reuse original spring.
I made this to replace the clip on my cabinet trashcan setup. The files I have here are with 90% infill (strength) and supports everywhere. I recommend PETG for strength. I did not have to use any glue to put it on the end of the rod. I…
Holder/clip that snaps to the frame of the MK4 to hold scrapers. Print 2 to hold the scraper straight. V2 - Reduced the width slightly so it is more snug to the frame.
CAUTION! Broken desiccant beads can fit through the slots. Be aware. Material: PLA Infill: 15% Layer settings: -Tube, set to 0.3 w/ variable layer height, adaptive only (see image) -Base, 0.3 Supports: -Tube and cap, only the locking tabs…
This fits snug on the pressure relief valve and has plenty of clearance from the lid. I did not model in the feature that allows the valve to open and close. I trimmed masking tape on the original then transferred the tape to the one I…
Even though I already have solar and the hardware can be seen on my house salesman still come by. I printed black letters and outline on white. 15% infill 0.2mm
The main body of the camera was wedged against the trim around my garage door. This little plate extension, and a 1/16 thick rubber gasket, extended the camera enough to mount it as expected. It is not a perfect outer profile. I took my…
There are 2, 4, 6, 7 & 8 pipe separators. My printer: Prusa MK4S (A 7 pipe separator is the largest that will fit on the bed) Material: PETG Infill: Gyroid, 20% Walls: 3 Layer: 0.20 mm If you want to expand to more than 6 separators, I bl
To wszystkie aktualnie dostępne wyniki.
