Liczymy pasujące modele…
(1) for 4.7mm total thickness of Panel/Foamtape (2) the pin is designed to hold in the frame-sided part, the panel will lift off without pin. The lower pin is by design 1mm lower. It's still a 5x50 pin but reassembly is made easier with…
Convert your better half's PC and make it an eye-catcher. The monogram is removable and can be replaced. Multi-colour printing this is on my own bucket list. I did also remove the cut-out for better compatibility 8x M3 Heatinserts 3x…
Designed for M3 heatinserts(3x) and M3x12mm screws. The 4mm Bowdentube is 90mm in length, you will need two of them. Added drill template. The Bowdentubes should be at 14cm measured from the bottom panel.
Designed such that you can print it standing on the chamfer. In that orientation it should not break off that easy. Printed with a 0.4mm nozzle at 0.2mm layerheight; 4 walls & top/bottom layers recommended.
Designed to act like a compliant mechanism. Prevents too much tension on the bowden. At the same time the bowden can stay short. The guide can be mounted to the A/B Frame but also to the upper frame. Added also the Cableclip for…
Might need rework on the kitchenband. Grind 2mm from the backside. The width should be wider than the hook. With that cut-out you can slide the hook on.
To wszystkie aktualnie dostępne wyniki.
