Liczymy pasujące modele…
This was an original model set I originally created for my CNC, but hey why not here also. I also have other designs, which are more of a puck area inset to the flag with the following items: Lady Justice, Caduceus, NASA, Starforce, USMC,…
New warning sign, with 2 options, a magnet mounted option, and a thin version for cases where a magnet wouldn't work. Again, I printed these without the use of MMU, it is just simply using the PrusaSlicer Color changing inserts, and…
So, I wanted to put rolly wheels upon my Makita Cases, and wanted it cheap. Got some small rolly wheels, a small sheet of 1/2" (or 12mm for you metric types) playwood, and some cheap screw in rolly wheels. I was actually impressed with…
I went to go tweak the tension on my V0, and man it's a tight fight back there, and the knobs were hard to turn. So here is a wrench to solve that problem!
Although the originator posited he liked to see everything, nothing in his way to get grabbing, I find that better storage still has all it's properties, but with a lid. Designed all from 1x1 to 6x6 in every variation. Probably only thing…
Inspired variant of the MaxT model to hold the large 50gal trash bags for the garage. Since I live in Arizona, and it gets really hot in my garage, this is printed in ASA so it won't droop over time, but if you live in a more moderate…
A wall mounted clip for the Makita 40V battery system. Nothing special to print, as the overhang already has pre-included support. I printed it .4 nozzle/.2 height, 20% infill, no supports. As I live in Arizona, i printed mine in a heat…
Needed options for adding keystones to back of my Voron V0.2. This mod should work for all V0 sets though. I did 3 versions, 1/2/3 keystones, the pictures of the 3 keystone set. Als included a test keystone to check fitment of your…
Update 5/23/2023: I added 2 more models of the tray, both with notches, as I found it sometimes difficult to remove the calipers from the tray. The standard notch is shown, and works well enough, but I also added a larger notch variant to…
No change to the V2 version of the model i remixed other than posting the color changes for prusa slicer.
New warning sign, with 2 options, a magnet mounted option, and a thin version for cases where a magnet wouldn't work. Again, I printed these without the use of MMU, it is just simply using the PrusaSlicer Color changing inserts, and…
Wire spool holders, I have gone through many different models and they all have their failures. The original set I remixed these from solved many of the issues, a modular frame with no glue, and enclosed box frame to keep the spools from…
Bessey K Body Revo clamp wall mount, holds 4 clamps. This is meant to be screwed to a simple 90deg piece of plywood to allow you to find a stud in wall, as k body clamps are pretty hefty. The piece is gangable, ie you can print as many as…
This is a full build of a power supply based off my previous 18V version, but that again is off of Volon's original design for the 18V adapter plate. This had a whole new redesign of the adapter to fit properly to the 40V Makita Battery.…
Quick plug design to fill those annoying dust collectors on the mountings. This is just a simple angled dowel that will fit in the angled holes and over the internal screw/bolts. One size fits all of the 24 gaps, although if your like me…
If you have a Dust Collector (4" outlet) that has high air flow, but lower pressure (a shopvac by comparison is high pressure, low volume aka cfm), then this is what you need if you want to use, as it will still maintain the larger CFM…
Modification of original, mostly just extended the inner surface so it fit tighter, and also added the stepped larger covers for other open ends also. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No…
We often travel and play cards, this is a bit more of a rugged storage, and should protect against the elements. I made 2 versions, a single and double deck. Case is of my own design, with a simple hinge, no required hardware an minimal,…
Small Fridge magnet (holes on back of model to glue in) of our favorite Marvel Character. Magnet hole is 12mm diameter by 2.9mm deep.
New warning sign, with 2 options, a magnet mounted option, and a thin version for cases where a magnet wouldn't work. Again, I printed these without the use of MMU, it is just simply using the PrusaSlicer Color changing inserts, and…
This was an original model set I originally created for my CNC, but hey why not here also. As I said I would, this is the USAF flag & Puck models of the other, and I still also have other designs, which are more of a puck area inset to…
New warning sign, with 2 options, a magnet mounted option, and a thin version for cases where a magnet wouldn't work. Again, I printed these without the use of MMU, it is just simply using the PrusaSlicer Color changing inserts, and…
This is a simple storage system for the test leads on a Fluke 117, although as this is using the slot for their magnetic hanger that is used across many of their multimeter line, should work for other models as well. I sized this to allow…
Wanted to place my Bessey Strap clamps with all of the other clamps, so did a quick mockup.
Took the original, and replaced the back mounting peg with a hex key to fit the front skirt of a Voron V2 or V0 skirt. Note, the compactness of the original model is good for making the footprint small and out of the way, but it does make…
Slight remix of original, made it a bit beefier and symmetrical, as it first cnc'ed directly on the onefinity cnc itself, with a generous 1mm buffer for inner bores, that are then later milled to tolerance, adding in drill/tap and then…
Liked this for the bottom of my V0, but had to add a backing, and while i was at it, i added Voron Logo & Text. Although I did it for my V0, should work anywhere you would like :). This is a simple color swap, used .3mm layer heights, so…
Epoxy Holder with place for chopped up sticks for stirring when I use it. Bottles are the 36mm diameter size (4.5oz combined, so 2.25oz each). Sticks are just chopped up coffee stirrers. Print Settings Printer Brand: Prusa Printer: i3…
This is an implementation of Clough42's ELS (Electronic LeadScrew), of the supporting files I used to mount the servo and encoder. The original youtube video is here: https://www.youtube.com/watch?v=FTs9GygRQ-U&ab_channel=Clough42 and my…
Updated, added a V2 version, as the original got a bit thin in places near ear. Printing V2 in a small bit will update photos. The original was curved for a hat, but I wanted a flat profile with text that was more like the GoT style. I…
Needed a way to keep my stuff from skittering to the sink or floor or trash, but also quickly see that everything I need is handy. This is a bit specific, as it is for a Contour Next glucose meter, and also for the Toujeo pens, but it…
In the morning, I ain't always the sharpest, but that's when I test and inject. The station fits a OneTouch Ultra, pin prick, test vial, and then items for my insulin injection. How I Designed This I went thru a few revisions, learning…
Probe holder that gives you choices. Main body tilts the probe out allowing for easy thumb access from top, while still leaving side to side and top to bottom ways to extract the probe from the mount. The tilt was a desire after printing…
I had a want to add a pool fountain to an older in ground pool that didn't have a built in port for the spray nozzle to help cool the pool. The use of a fountain sprayer helps cools the pool down up to 5-6 degrees, and in Phoenix that is…
Customized version of http://www.thingiverse.com/thing:656884 Created with Customizer! http://www.thingiverse.com/apps/customizer/run?thing_id=656884 Instructions Using the following options: SDcard = 1 RelieveOverhang = 10 DisplayType =…
Small angled mount for mounting the Drok dual temp sensor with lead out for wire. The sensor comes with 2 probes, and for this case I am using it to monitor water temp for cooling of a CNC spindle vs air temperature. Handy to know any…
I liked the original, but wanted to color it up a bit, and also i really liked the front tray. Instead of adding a ton of support to get the text in the top, I split out the tray from the main body, and also added 2 options for the size…
I needed away to neatly manage multiple cords behind a french cleat mounted board with all of my chargers on it. I only had a half inch of space to do so, and really didn't want a rats nest of cords for the 6 different chargers I had back…
A simple block to hold my new favorite CA, Starbond. Holds dual 4oz ca bottles and a can of accelerator. Added a separate set of badges to front and back to declare my loyalty :).
This is a shorter version of the original, and also adds dual ECAS inserts (or locations to put them anyways :).
A pool thermometer I purchased, and INKBIRD wireless pool thermometer, had a really small attachment point for tethering to the sidewall of the pool, and if left free roaming, it would always go out of range of the wifi gateway, and…
To wszystkie aktualnie dostępne wyniki.
