Liczymy pasujące modele…
I printed this with the Voron settings in ABS: https://docs.ldomotors.com/en/Toolboard/nitehawk-sb This went in a Switchwire build (actually an Enderwire build) but might be useful in other applications.
The hinge bolts that come with the helmet are plastic and very weak. It's too easy to overtighten the helmet (to keep it from slipping down) and break them. Hardware Required 2 * M6x25 Hex Head Bolts Print Settings Infill - 100% Perimeter…
Crazy simple: Material: PLA Layer Height: 0.02mm Supports: Nope! Brim: Yup
I bought a mag drill and it came with a bunch of annular cutters. Rather than leave them in their original plastic boxes, I wanted something more organized / accessible / attractive. Enter - the 6 cutter holder! Print guidance: Item Value…
Simple replacement for the door reflector in a 2008 Nissan 350z. Settings I used: Layer Height: 0.2mm (although if i did it again I would go down to 0.1mm to make the curve look better) Supports: Yup. No way around it. I assume this shape…
Our good for nothing cat loves to curl up on the heat lamp for our turtle. Some say she means well, but we know better. She often knocks the turtle's heat lamp over which is at best a nuisance (at least one of the UV lamps burns out) or…
I got tired of the Command Hooks on my door breaking under the weight of my robe. Enter - the *skookum hook! Settings I used: Infill: 40% Walls: 5 Floors: 5 Layer Height: .2mm Supports: none *skookum: Canadian for “strong”
Challenge Run the following utilities around my workshop: Water (hot and cold) in 1/2 PEX Compressed Air (in 3/4 PEX) Network Cables Speaker Cables (for surround sound) Solution I choose to put the heaviest bits closest to the wall (the…
Totes simple bracket. Symmetrical. Print 2 for each lid! Settings I used: Filament: PLA Layer Height: .02mm Supports: You betcha
Jensen JC7DM There is a version specific to the Jensen JC7DM. It attaches to the slide mount that comes with the unit. This version prints nicely without supports. Generic I made the other version for my dad to use a suction cup mount.…
Super simple filament length gauge for calibrating an extruder. Here is a video I found that covers that process:
I got tired of my microwave pushing back whenever I pressed buttons on the front of the appliance, so I made this simple bracket to keep it from moving. Printing, I probably just used the default PLA profile (15% infill, etc).
Filament My shop is air conditioned, so I was lazy and used PLA . If yours is outside or your shop isn't conditioned, I would strongly recommend a more thermally stable material such as: PETG ABS ASA Print Settings Infill: 20% (this is…
To wszystkie aktualnie dostępne wyniki.
