Liczymy pasujące modele…
Simple mount for the Logitech C270. Made so you can use the cam as-is without disassembly, tools or anything. Just slide it on the printer, then slide the cam into the mount → Done.. I printed it with the cheapest left-over PLA I had…
I printed it with: Material: PLA, White Silky Nozzle: 0.6mm Layer height Spikes: 0.3mm in Spiral mode All others: 0.3mm Walls: 3 Top/bottom 2 layers = 0,9mm Infill: 100% 100% infill to ensure maximum strength The centerpart is to the…
I printed it with: Material: PETG Nozzle: 0.6mm Layer height: 0,3mm Walls: 3 (alternate extra wall) Infill: 30% Support: Tree support Top Z distance: 0.2mm to make it easy to remove STL and Fusion 360 files provided.
I printed it with: Material: PETG Nozzle: 0.6mm Layer height: 0.4mm Walls: 2 Top/bottom 3 layers = 0,9mm Infill: 10% Only the hat uses infill. At least when using a 0.6 nozzle STL's of the assembled model, parts and Fusion 360 file…
I printed with: Material: PLA Max, Pure Black Nozzle: 0.6mm Layer height 0.16mm Walls: 2 + Alternate wall Top/bottom 3 layers = 0,9mm Infill: 15% Speed Generally: 60mm/s Outer wall: 40 mm/s Threaded with M42x3.00 to make adjustment easier…
I printed it with: Material: PLA Nozzle: 0.6mm Layer height: 0,3mm Walls 2 (+alternate extra wall) Used modifier to make 3 walls for the vertical part hanging against the tool wall, including the tabs hanging onto the wall. Top/bottom 3…
I printed it with: Material: PLA or PETG (Recommend PETG for hot stuff) Nozzle: 0.6mm 0.4mm will probably make a better looking print, but haven't tried it. Layer height: 0,3mm STL and Fusion 360 files provided.
To wszystkie aktualnie dostępne wyniki.
