Liczymy pasujące modele…
Stronger version: https://www.printables.com/model/1220427-usb-c-lightning-dirt-remover-v2-container-included Tool for cleaning the usb-c connector from dirt. Lightning version:…
Stronger version: https://www.printables.com/model/1220427-usb-c-lightning-dirt-remover-v2-container-included Very fast printing Sometimes when the iPhone charges poorly, it may just be dirt in the connector. This cleaning tool has helped…
The folding procedure is in the attached pdf.It's a good idea to use washers everywhere on the M5 bolts. Static_part , joint 1, joint 2 can also be combined with version 1. Numbers of printed butterflies: Butterfly_cover_long.stl - print…
The folding procedure is in the attached pdf.It's a good idea to use washers everywhere on the M5 bolts. Version 2: https://www.printables.com/cs/model/529125-variable-mobile-phone-holder-with-clamp-v2
This tower is designed for maximum 14mm cubes.If someone wants bigger cubes he has to enlarge the tower. No support required.
If someone does not want a container with a label, a container without a label is also available. The cleaners can be sharpened with a file if someone wants a sharper edge.
The version of the beer can lid with handle is here: https://www.printables.com/cs/model/502538-beer-can-top-with-handle The door must be fitted on one side first, and then by expanding the lid, you push the other side as well.Before…
The pin must be pushed in with force.Instead of the pin, an M4 screw can also be used. The beer can cover without handle is here: https://www.printables.com/cs/model/498048-can-cup-or-jar-lid-sliding
A bowl suitable for the sink around the open bottom, so that the water flows directly into the sink and does not settle in the bowl. Thanks to this, the soap will be dry.
Size of magnets: Diameter 5mm Height 3mm A small tin box for dripping tin can be placed in the middle. M5 screws can be used instead of hinges Very thin cables can also be clamped between magnets
The Philips Hue dimmer switch V2 holder is attached using double-sided adhesive tape Pay attention to the polarity of the magnet, because there are two magnets on the original controller, each of which is turned in the opposite direction.…
A quick house kit for a nativity scene.After disassembly, it takes up little space.At the top of the walls are holes for Christmas lights. The diameter of the holes is:5,15mm Folding house without characters Rýchla stavebnica domčeka na…
No support. For large organizers need 6x self-tapping screws 2,5x10mm
Also included in the files is a manual for assembly. Organizer for various office supplies, with mobile phone holder.The round pen holder can be manually rotated for comfortable removal of pens. The individual parts can also be used…
Šnúrku treba zauzliť okolo šróbu 1x Šrób s guľatou hlavou M4 dĺžka 20mm 1x Matica M4 The string must be knotted around the screw 1x Screw with a round head M4 length 20mm 1x Nut M4
Before folding, it is a good idea to check the folding manual so that you have the necessary nuts and bolts.
Hodiny s rotujúcimi diskami, ktoré poháňa klasický motorček do hodin. Pod dlhé ozubené koleso a hore na disk s hodinami som použil podložku M5 a pod ploché dve ozubené kolesá som použil podložku M3. Ozubené koleso na motorček je nasadené…
Knives for: BOSCH ART 23-18 LI, ART 23-18 LI Plus, ART 23-10,8 LI, EasyGrassCut 12-230, EasyGrassCut 12-23, UniversalGrassCut 18-23 a UniversalGrassCut 18-230 I gave two versions of knives. Later I like the version with 1 rounded side for…
Small couplers for the train track from Ikea
A bracelet that will help you at work so that you do not lose bits.The size is unlimited.The bits in the bracelet are held by magnets.The bracelets can be connected and color-coded according to the type of bits.Before fitting the magnet,…
I slightly reduced the opening of the door so that not much heat escapes, but so that it is enough to remove moisture. The PTFE tube is a little visible from above, but that doesn't matter at all, it's around the corner. The reduction is…
There are holes on the top of the wings for hanging. Of course, the doves can also be glued or just laid down.
The procedure is attached in pdf. Attendance required: -Screw M4 length 12mm (the screw is on the photo) -Nut M4 In order to keep the stand from slipping, it is a good idea to glue on rubber feet. It is of course possible to add text to…
Support:yes One self-tapping screw required:2.5x8mm
The knives are shorter or longer and they are also rounded or pointed.Three knives should be printed per hand.The strap should be shortened with scissors after putting it on the hand.The knives should be pressed into the clutch, if they…
Light and fast printing. No support required.
Adapter for 45 rpm records. There are two versions with a diameter of 38.1 mm. One with a 6.35mm hole Second and with a hole of 8 mm Next, there are versions that are either one piece or a version that consists of several parts that must…
Ihrisko sa dá pospájať s neobmedzeného množstva modulov a takisto sa dajú rôzne kombinovať prekážky. Loptička sa dá aj vytlačiť, ktorá nebude až taká hladká alebo použiť nejaku alternatívu podobných rozmerov. Pri tlačenej loptičke je…
No support. Magnet size: 5x3mm Before closing the cover, you must first check that the magnet is inserted correctly so that the compass points north. The cover can be glued with instant glue. Bez podpory Magnet rozmer : 5x3mm Pred…
There is also space for an led strip or a decorative effect. The plate can be opened and there is a storage space for screws, for example, and there is also a magnetic pen, which serves as an aid for removing screws. Support only for the…
Just slide from the bottom and it holds.To pull out the tape, just lift up. The screws need to be screwed in so that the arms move freely, if they are tightened too much the closing will not work properly. The parts that are used for…
It is adapted to the Bosch EasyVac 12 vacuum cleaner hose. In the models there is also a ring with which you can make a reduction for your type of vacuum cleaner. Left or right handle can be installed, but it can also be used without a…
The shelf is glued to the wall with adhesive or double-sided tape. A drawer is not necessary if the shelf is directly above the sink and water can drip into the sink.
Tým že dvojvypínač obsahuje 4x aqara switch, môžete s ním vykonať 12 príkazov (jeden aqara switch ma tri funkcie: jeden klik, dvojklik a podržanie). Predpokladám strátu záruky, lebo originál je potrebné rozobrať. Panty treba prilepiť zo…
Adapter for 45 rpm records. There are two versions with a diameter of 38.1 mm. One with a 6.35mm hole Second and with a hole of 8 mm The offer includes three different discs and two types of tires.
Fixed organic support
Nastrihal som si 8 kusov filamentu o dlžke asi 40cm ktoré som vložil do rúčky, niektore aj za pomoci malých klieští.Preto som pridal aj viac verzií s rôznymi dierami.Potom som ich zapletal ako klasický korbáč.Návod som si našiel na…
The holder is made of two parts.One is fixed with a self-tapping screw and the other can be detached and can be placed, for example, on a table.
There is also a reducer in the models that is used to charge wireless headphones (I have tried it with earfun headphones and I don't know if airpods will fit there as well. The holder is fastened with self-tapping screws. I'm using it on…
To wszystkie aktualnie dostępne wyniki.
