Liczymy pasujące modele…
I made this addon for the 2kg spool holder because the filament always jumped off the spool when the print head was too high. It uses 2 M3 nuts, 1 M3x30 screw and 1 M3x10 screw. I also used the short bowden tube from the original filament…
Years ago I backed a kickstarter project that sold those shoe things where I didn't need to bind them anymore and make them look better. Now I recreated them because I used all of them. After installing them you can cut your shoelaces :)…
It is printed using Eryone TPU. It will also fit PolarPro ND Filters. Should also fit the new Hero 10 (not tested).
I adjusted the holder to fit my iPhone 14 Pro with my M1 Macbook Pro 14".
Small side hook to attach the converter with a zip tie or a 1/4" screw to your camera. You will need two M3x8 screws to attach it. I printed them in PETG.
I made the lever 8mm longer so it can be used with the Top Panel Door Mod. Layer height: 0.2 mm Perimeters: 3 Infill: 50% Infill pattern: Grid Brim: Recommended
This is a Bottle Holder for 0,33ml glas bottles, made for my old Volvo V40 (1999). Print with PETG for hot summer temperatures in your car.
My bottom ring around the glas blender broke, because I would have to buy the whole glas jug I designed my own one. Printed in PETG, I used supports on build plate only. Worked great until the motor died :<
🏆 Built for Set Life ~ ChatGPT This bottle holder is designed to fit on the side of any Adicam or Schlepp One film cart. It is secured with a screw from the inside of the cart, through the existing holes, into the bottle holder. The…
Small side hook to attach the distributor with a zip tie or a 1/4" screw to your camera. You will need two M3x8 screws to attach it. I printed them in PETG.
I made the lever 8mm longer so it can be used with the Top Panel Door Mod. Layer height: 0.2 mm Perimeters: 3 Infill: 50% Infill pattern: Grid Brim: Recommended
Side hook for IKEA BROGRUND towel holder. You will need one M3 square nut and one M3x12 screw . Printed in Petg with a solid part where the screw is inserted (as shown in the .3mf file).
Case insert for the Hero 9/10/11 that fits a Sennheiser MKE400 II. I printed it in PETG with a 0.6mm nozzle, but would recommend to print with a 0.4mm nozzle. 3 perimeters with 10% infill.
This is a handle attachment for a Pelicase 1610 handle. It makes carrying the heavy pelicase way more comfy. Printed in TPU. After attaching it to the handle I inserted three little screws into the holes in the original handle.
This is a 1x1x12 gridfinity bucket for fitting a SH-U09C5 USB to TTL UART converter inside it. You can also put in a matching cable.
this is the fixed version of the slide on variant
To wszystkie aktualnie dostępne wyniki.
