Liczymy pasujące modele…
Version 2 available Version 2 can be printed without supports, has tighter solerances and is smaller while keeping the same inside dimensions. It can be found here . A larger Version with 6 digits is available here . A number safe with an…
Use your standard bits in this simple screwdriver. Update I added a folder with STLs that support different sizes of magnets. The original version is still without a magnet, which works well in my case as the tolerances are low enough to…
For bambulab users: you can find the model including print profiles here on makerworld . I wanted a drill press for my Dremel, as well as a dedicated press for installing heat-set inserts with my soldering iron. Since there are already…
It is a cute bunny! Happy Easter! 🐇🐇🐇 Powered by Image-to-3D from MakerWorld (https://makerworld.com/makerlab/imageTo3d)
Version 2 is available here . It is stronger and stacks even better. This box is designed to be printed in vase mode for high speed printing. It is 125mm x 125mm wide and 70mm high. I used my Bambu Lab P1S with a 0.6mm nozzle. The grooves…
I bought these blinds very cheaply from amazon and automated them using Nema17 motors and ESPHome. Many cheap blinds come with exactly the same layout. You will need some experience with electronics to make this project work. Components…
A compact drawer system designed to hold Gridfinity bins , available in multiple sizes. Currently, the design comes with five drawers , with grid sizes ranging from 3×4 up to 4×7 . Two versions are available: For Gridfinity bins up to 4…
I recently switched from a skadis to a honeycomb storage wall. On my SKADIS I had the awesome “ Another Skadis Plier Holder- 4 Wiha plier possible ” model by Jodadoo so i remixed this to fit on the new honeycomb storage wall. To mount…
Its a cute cat! I printed it using metallic PLA.
The models come in different sizes. I uploaded diameters of 4mm, 5mm, 6mm, 8mm, 10mm and 12mm each in a 150mm, 200mm and a 250mm version. If you are not sure, wich one to choose, just get the 8mm x 200mm version, it is a good place to…
Looking for a shorter box? The square version of this design can be found here . This box is designed to be printed in vase mode for fast printing speeds. It ist 250mm x 125mm wide and 70mm tall. I used my Bambu Lab P1S with a 0.6mm…
A door handle for all those IKEA doors (that are 16,5mm strong). It just clips on, no need screws. It is 30mm wide. If you want a longer or shorter handle, you can just change the z-dimension in your slicer. I printed mine with PETG
Mount up to 12 screwdrivers on your Ikea Skadis using this holder. Ensure the diameter of the grip of your screwdriver does not exceed 20mm, or they will not fit next to each other. The holes in the holder have a diameter of 3.6mm, so…
Please make sure, your print can handle the weight of your expensive camera before using this design. I do not take any responsibility for broken equipment. Onshape-Link:…
A 150% enlarged bench that holds 2 USB sticks. Organise your desk and show your love for 3D printing!
I designed this part for my FlexiSpot E5 to replace the net, that came with the desk to hold the cables. I added holes to make it filament-saving. I can only confirm the fitting on the E5-model. Please let me know, if other models work…
Version 2 is available here . It is stronger and stacks even better. Looking for a shorter box? The square version of this design can be found here . This box is designed to be printed in vase mode for fast printing speeds. It ist 125mm x…
I created this cabvleclip to hold small cables an my hsw.
This model allows you to mount 15 tweezers to your Honeycomb Storage Wall. To mount this to your HSW you will need the hollow inserts.
With this Part you can add 3 x 40mm fans to the front of your PC. It fits exactly into a 5.25" CD-tray.
100mm x 120mm x 201mm (w*d*h) box to hold your silica gel or other desiccant in your drybox. With this I reach humidity levels down to about 16% RH.
This stackable tea organizer can help you save a lot of space in your kitchen. It comes with optional dividers to segment the box matching your requirements. It fits about 28 upacked teabags. It is a modified version of my Stackable Tea…
This is a simple pill tracker that reminds you to take your pills daily. The knob snaps into place at each position. I created both an English and a German version. For the English version, I created one version with Mondays and another…
This system lets you quickly switch the airflow of your 100 mm air ducts between two directions. The integrated arrow, which also serves as the handle, clearly indicates the current airflow path at a glance. Magnets hold the internal flap…
A funnel and stand for the original Bialetti Mokka Express to fill the basket with ease. Both peaces fit into the Bialetti when its not in use.
For my work I needed a way to store multiple USB flash drives at marked positions, so i designed this holder. Behind the slots it has a little tray where you can store the caps of your flash drives.
Store your 58mm puck screens with this magnetic holder. Uses 10mm x 3mm magnets ato hold on to your coffee machine.
A simple stand that allows you to store 3 2,5" HDDs and 3 external Hard Drives in a space saving way.
You can use this brackets to store 11l/22l Ikea Samla Boxes. They keep them from moving and can hold a lot of weight. Each of the two brackets can be mountes using one screw. The pin on the bracket goes into a second hole you have to…
This is an extension for the pipe of a grundig battery powered handheld vacuum cleaner.
Protect your delicate seedlings from heavy rain with the Seedling Shield! This cover is designed to safeguard young plants from being damaged by excess water while still allowing for air circulation and light penetration. I designed it to…
Organize your cables and store them with this cable hanger. The hanger can be mounted using two screws and holds up to six clips.
I designed this model for my Stabilo felt-tip pens, but this should work for any hexagonal or round pen with a diameter (or smaller width with hexagonal pens) of up to 9.3mm. In the middle there is space for small items like paper clips.
I designed this frame box for my Speedmax CF SLX 8.0 SL (Size M). It sits right above the bottom bracket and has a sliding lid on the left side. It integrates with the Elite Crono CX aero bottle. I printed the box using PETG-CF and did a…
A practical mount designed to securely hold standard 8x AA battery packs. The holder can be mounted using four screws for permanent installation. The design keeps your battery pack firmly in place while maintaining easy access for battery…
Simple and easy to print clip to store your cables. Scale it up or down to fit your requirements.
A dispenser for powdered laundry detergent that releases a fixed amount with each full slider movement. The tank is available in 3 sizes: Small, Medium and Large , each with or without a level window . The version shown in the pictures is…
You need 64 Pixel LED-Panel (about 2$): https://de.aliexpress.com/item/1005007273486672.html https://de.aliexpress.com/item/4001095066272.html (alternative) ESP8266 D1 Mini (about 1$): https://de.aliexpress.com/item/1005005658563136.html…
A holder for this USB-Hub available on amazon or aliexpress .
A simple holder for the Dymo Leta Tag XR ( available here ) with a push-fit connector. No extra insert needed.
I was unhappy with the stock bento box on my Canyon Speedmax CF SLX 8.0 SL (Size M), since I did not like the opening and it was always a bit too small. That’s why I designed this 3D-printed one with a magnetic hinged lid, which is easier…
I redesigned this silica storage box to make handling silica much more convenient. Each compartment features a screw-on lid, which can be swapped out for either a funnel (for easy filling) or a spout (for controlled emptying). To fit two…
With that case you always have an ice scraper with you right in your pocket. This is a remix of Samsung Galaxy S22 phone case - 3 Styles by Otter Mountain .
I designed this little box with lid for my cleanroom wipes (100mm x 100mm). I bought my wipes here: https://amzn.to/4mHUbpM
I created this lift for my television because I don’t have much space in my apartment, but I do have very high ceilings. The TV moves along a vertical pillar using a gear running on a rack, guided by aluminium rails. I used a 12V, 20RPM…
I use these cheap precision scales to weigh my grounds when making espresso. Since they are too small to fit my portafilter, I designed and printed this adapter for regular 58mm portafilters. You need to remove the original (glued on)…
Clone of the Onepaa x2000 camera mount.
To wszystkie aktualnie dostępne wyniki.
