Liczymy pasujące modele…
Hi, this is a pool fountain you can plug into your pool outlet. You can change nozzles as you want, thread is M30x3 Video: Note #1: It is ment to plug into outlet hole with plastic that is left when outlet guard breaks of sun. Note #2:…
### UPDATE! Now the text is in correct horizontal orientation Hi, this is a cap/cover for Canon's camera body with mount ef / ef-s Print settings: Layer height: Any, I used 0,2mm Material: Any, I used PETG Supports: Yes, only on build…
Hi, this is a collection of lego technic liftarms/beams. They were created with help of this web app ---> https://marian42.de/partdesigner/ but I had to make dimensional changes. Print settings: Raft - may be useful with PLA, don't…
Hi, I was in need for a few lens caps and as I didn't have any I modelled them. And after few iterations I got them working quite well. Enjoy and protect your lenses! Cap is a print-in-place model, so a good tolerance is needed Supports:…
Hi, this is a remix of the Canon EF/EF-S to M42 adapter, because I wanted to use my lens for astrophotography and couldn't focus. Print settings: Layer height 0,1mm Supports: NO #Note: There is no place for a locking hole, so try to print…
Hi, this is a 3D printed macro extension to turn your EF/EF-S lenes into macro lenses. You can use any lens standard/telephoto. For tele lenses you can connect 2 extensions to achieve even bigger zoom. Print settings: Layer height: Any…
Hi, this is a model of a plastic cap for trunk lid for Skoda Roomster. Print settigs: Layer height 0,1mm or lower No supports Material: I used PETG, other should work Note: GCODE has 215C temp as I use that with my SUNLU filament If you…
Hello, this is the start of collection of lego pieces you can 3D print. I adjusted the size of the center axle hole so it fits well. Series: Lego Technic Type: Wheel Part nr: 4185 Print Settings: Layer height: 0.15/0.1mm Supports: Yes…
This is a V2 model of Bestway 58389 pump impeller you can print. I works. I've had mine for 2 months so far. You need to use 100% infill. Use supports. I used PETG for mine. If you find it useful, please live a like and post a make and a…
Hello, this is the second adapter that I commonly use when connecting my Canon camera to telescope. It is 1.25" so only works with crop sensors (APS-C) but may enable you to achieve a few extra milimeters of backfocus which is sometimes…
Hello, I just got myself a newtonian telescope and needed an adapter to take photos. The original is good but I wanted to be more secure so I added a locking hole and shortened the tube. It works with EF / EF-S mount cameras. Settings:…
Hi, this is a model of Volkswagen Transporter side mirror cover/plastic/cap. I couldn't find any on the internet so I modelled it. Note: You may need a little sanding to make it fit. Print settigs: Material: PETG recommended Layer height:…
Hi, I was recently wandering why my pump was being very loud, so I disassembled it and opened it. What I saw was a cracked and worn out shaft/rod, so I modelled it. Print settigs: Layer height - any, though I recommend 0.1mm Supports - No…
A plastic wire whisk attachment for SilverCrest mixer. Remember that you need to have original wires as this is only the think holding them. Settings: Layer Height 0,1mm Supports Yes I used PETG for resistance #Note Rotate the top part to…
This is a plastic part that broke in my Audi Q3. It makes rear clipboard hold in place. Settigs: Layer height 0,1mm Suppports YES
Hi, this time I've brought an adapter with a thread Size: ANSI 1 1/8 inch 14 Threads per inch, for a MoonLamp, It's a ceiling adapter or you can use it with other lamp stands. Print settings: Layer Height: 0.1mm or 0.15mm If you like this…
Hi, Version 2.0 of Lego Technic compatible beams/liftarms. This set features classic sizes: 2, 3, 5, 7, 9, 11, 13, 15 Studs. Print settings: Material: PLA recommended for stiffness Layer Height: 0.15mm and below Walls: 1 Perimeter…
I printed it in 2 halves, because I didn't have enough time. You can try to print it as one piece.
Hi, this is a light diffuser for kitchen's cooking hood. Dimensions are 287mm x 42,2mm. Settigs: Material white PETG as it needs to withstand elevated temperatures Layer height: Any, I used 0,2mm Supports: Yes #Tip: On prusa you need to…
Hi, I'm currently in process of building OG star tracker. But the only screws I could buy locally didn't have the thread all the way. So I made a change for my screws to fit.
Hi, I am currently in process of building my own OG Star Tracker. I didn't know what I wanted to use for polar alignment so i modified the main part so that i could quickly change laser/polar scope/guide scope without reprinting the main…
Hi, I like astrophotography. When you use Newtonian or mirror telescopes you get characteristic diffraction spikes. You can't achieve this look with refractor or standard camera lenses. This Diffuser allows you to get those pretty stars.…
Hi, Version 2.0 of Lego Technic compatible beams/liftarms. This set features Extended sizes: 17-43 Studs Print settings: Material: PLA recommended for stiffness Layer Height: 0.15mm and below Walls: 1 Perimeter generator: Arachne…
Hi, This time I present to you a PingPong ball container. It can hold 3 balls. Features a screw on lid and twisted design. The lid can be printed in 2 colors with layer change. Main Body printing instructions: Layer Height" 0.1 - 0.2mm…
Hi, I present to you a simple Vinyl Record holder. Print settings: Print laying on it's side Layer Height: 0.1 - 0.3 Supports: Yes, tree type If you like this model, please leave a like, comment and share your print!
To wszystkie aktualnie dostępne wyniki.
