Liczymy pasujące modele…
Heavily inspired by this model , except the strain relief collar is attached to the Molex receptacle. The groove for the zip tie is deeper at 1.5mm without sacrificing any thickness on the back side. The v3r1 model sits about 1mm above…
This mod raises the standoffs for the Klipper Expander PCB so the slotted cutout can be used for mounting without interference issues. This lets you use standard M3 screws with the DIN mount from this page.
The original Betrayal at the House on the Hill stat markers were too loose for the supplied character cards. These ones have a tighter fit and longer indicator to better show what number it is on. A FreeCAD file is supplied in case anyone…
15° angled mount for Audioengine A1/A2 speakers. Intended to be used with the speakers placed on their side. Includes a template to cut a silicone damper for the top and bottom of the stands. The angle can easily be changed by editing the…
This is a wider and slightly shorter flared foot for the Voron v0. Intended to be printed in flex filament. Not compatible with the foot accents. The original M3 screws can be reused, but I recommend adding a washer.
There are three main goals of this model: Maintain similar layer times Avoid triggering minimum cooling thresholds where possible Fit on a 120mm print bed The angles go from 40° to 70° in 10° increments. Note that layer times will still…
Cutting jigs for silicone/pvc tubing with one inch, three-fourths inch, and five-eighths inch OD. Each jig has slots for 30°, 45°, 60°. 90° cutting angles.
This is an angled mount that fits between the Z-motor and AC receptacle of a Voron v0. The back panel stoppers on the bottom skirts may need trimmed for this to fit, as shown in the photos. The clamping mechanism from the original mount…
This is a screw-in replacement for the original Hyperkin Trooper joystick handle. It is about 1cm taller than the original and slightly more narrow. The stick handle is designed to be easily printed upside-down. I recommend using a…
Clip on grill for the Audioengine A1/A2 series speakers. The cutouts are intended to be filled with an infill pattern with no top/bottom solid layers. 20% rectilinear infill worked well for me using PETG filament. Dimensions are tight, so…
This is a simple grid for an 8x8 Dotstar LED matrix that prevents light bleed between neighboring pixels.
Simple alignment guides for the Universal 3D Printer Enclosure Standard Build by 3D Sourcerer . Useful if the enclosure must be removed and put back in place frequently. The guides are sized for use with standard 3/4" double stick tape.…
To wszystkie aktualnie dostępne wyniki.
