Secondary Fan Mounts for Voron v0 Electronics Bay
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Angled fan mounts that fits between the Z-motor and AC receptacle.
- Ocena
- 0 / 5
- Polubienia
- 7
- Pobrania
- 24
- Wydruki
- 0
- Wyświetlenia
- 346
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Voron Parts & Upgrades
- Licencja
- GNU General Public License v3.0
This is an angled mount that fits between the Z-motor and AC receptacle of a Voron v0. The back panel stoppers on the bottom skirts may need trimmed for this to fit, as shown in the photos.
The clamping mechanism from the original mount was shortened, so it may be a bit looser than the original. The “trimmed upper mount” is also slightly shorter than the original, so that should be used instead.
The models are provided with three different mounting angles: 10°, 12.5°, and 15°. The 12.5° and 15° mounts are angled to provide some active cooling for the the B-motor.
A FreeCAD file is provided so other angles can be made by changing the placement angle of the “FanAngleAdjustment” part that is part of the “AngledFanMount” object.