Liczymy pasujące modele…
Modular 1U Rackmount for ZimaBoards , to be co-located with Raspberry Pi and OpenUPS2. The design provides 5 “slots” to make up the 19" rack, which can be made from a combination of single and double-width holders which are secured…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to use some other PCIe Cards with my ZimaBoard Single Board Computer, but in order to use any card, you need to remove the mounting bracket. As there isn't a standard for where the screw holes will be on a PCIe card for the…
Wydruk około 1,86 €–2,27 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Horizontal 1U Rackmount for ZimaBoard with support for between zero and two, 7mm high SSD. If installing 2 x 7mm this will take the overall height over the 1U height (44.5mm) to around 51mm. The rack mounting holes are designed for M6…
Wydruk około 1,23 €–1,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've designed this for a 3D Printing enclosure controller I'm building using a Raspberry Pi 4. Design Features 1.6mm thick walls for sturdy construction 4 x 11mm knockouts for panel mount DC barrel jacks 4 x 6mm knockouts for panel mount…
Wydruk około 2,10 €–2,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Please note this design should be considered a BETA , I'm still making some tweaks for the following: Improve all hangers to make latching less stiff Improvements to PCIe hanger. Modular 3U Rackmount for ZimaBoards , to be co-located with…
Wydruk około 2,94 €–3,59 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I've designed this for a 3D Printing enclosure controller initially for the Raspberry Pi 4, but as many people use a Pi 3 for Octorint, I've remixed the design to accommodate a Raspberry Pi 3 b/b+. The photograph shown is of the case…
Wydruk około 2,12 €–2,59 € nettoWstępna wycena jednego wariantu
Having printed Manuel's original wrench, I found the 7mm socket bit I had in my Makita toolset was a bit loose and protruded further than I'd like. This remix is a minor change to increased the depth of the bit holder hole to 20mm from…
Wydruk około 0,87 €–1,06 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A low profile PCIe bracket for the Dell/QLogic 57810S dual port 10Gbps Network card. The bracket is 1.6mm thick. Printing Print with screw holes for PCB flat on the build plate. Material: PLA or PETG Print Settings (PrusaSlicer): 0.20mm…
Wydruk około 0,37 €–0,46 € nettoWstępna wycena jednego wariantu
I wanted to mount my Zimaboard and an extra 2.5Gbps NIC as I plan to use this as a pfSense router. I've provided 2 versions, one which uses brass inserts to secure the NIC onto, the other which provides smaller holes for M3 bolts to self…
Wydruk około 2,05 €–2,50 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A simple hook that allows my Plantronics Blackwire headset to be stored on the back of my Predator X34a monitor. I printed in PETG using a 0.6mm nozzle, at 0.3 layer height. PLA should also work as the headset is light, and the monitor…
Wydruk około 0,66 €–0,81 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Having purchased some Chef's Path containers to help store my open filament spools. I opted to add some colour changing silica gel beads into each container to help ensure moisture wasn't going to be a problem. However, using the…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena jednego wariantu
After creating some more complex designs, I've created a simple VESA 100x100 mount for the ZimaBoard and a VESA 200x200 mount which also supports 100mm mounting. The VESA100-200 mount is too big to print on my Prusa Mini+. The ZimaBoard…
Wydruk około 1,63 €–1,99 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A holder for D-Z73 reed switch to attach non-invasively to an Actaris gas meter. The meter has two small raised posts which allows the mount to be press-fit into place. The reed switch is attached to an Aqara Zigbee magnetic door/window…
Wydruk około 0,22 €–0,27 € nettoWstępna wycena jednego wariantu
Using plastic pin mounts to secure angled aluminium LED extrusion in the Ikea Platsa enclosure. Simple screwless installation using pin-mounts that fit into the existing holes in the side of the enclosure. Printing Enclosure base mount…
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
An enclosure for my Home Assistant Glow utility meter sensor. Other designs I've seen had the microcontroller and sensor as separate items, I didn't see the need and wanted a single enclosure. I had ESP32 Mini on hand as otherwise, I…
Wydruk około 1,31 €–1,61 € nettoWstępna wycena jednego wariantu
The radio aerial on the Abarth/Fiat 124 Spider (and the MX5) is rather long and replacing it with a shorter/stubby aerial is a common thing to do. However, the base of the aerial mount needs to be covered. This surround is for the…
Wydruk około 0,59 €–0,72 € nettoWstępna wycena jednego wariantu
The original design had a pin mount for USB and dual SD cards, but only a mount designed to be taped to the enclosure for the Prusa Mini Tools and USB stick. So as a first remix I thought I'd add a pin mount version. Printing Material: I…
Remix of the original to use plastic pin mounts in place of screws and make the base plate shorter so it only covers 2 holes in the Ikea Plasta enclosure. This design also uses rectangular magnets, with an additional overlapping frame…
To wszystkie aktualnie dostępne wyniki.
