Liczymy pasujące modele…
Uses two parts with clips that slide into each other. One part goes on the dock and utilizes the two M4 mounting holes. The other part is screwed into the desk and uses any small wood/sheet screw (I use 2.5x10 screws). Printing Both parts…
With the new CORE One+ I want to continue to have the manual lever available to open or close the ventilation grille. I adapted the original lever to fit the automated system and not close two holes. The writing has been reversed. It…
Remix of @BrianBerkley 10" Rack mount. It works with UXG-Max (Gateway Max) and UCG-Ulta (Cloud Gateway Ultra). Won't fits UX (UniFi Express) or UXG-Lite (Gateway Lite). Do you like my models? Consider buying me a coffee .
Box for 2 SandDisk Extreme SSD and accessorise (usb cord and USB 3 adapter). I added a space also for a microSD to SD adapter. My disks are 500GB and 1TB so one part is a little bit smaller. Remix Is permitted to feed any needs. Do you…
Parametric file for Lego Baseplate. In the files you can change the numbers of stud for the two dimensions (B and P) the rest will change itself. The stud circumference it's 5mm because my printer works with a little underextrusion, the…
I think the Quick Connect system created by @Jack, to connect PTFE tube, deserves more deployments, so with his blessing, I made STEP files for just "Single Plate" and "Single Block" that are the perfect starting point for any remixes or…
I've created my personal version of a Rugged Box with Multipart Pinecil/TS100/TS101/TS80 Case. Check the links for the original design. Latches and hinges need M3x16mm screws Print, seal in flex material. For the stand, you'll need a 608…
Compared to the original version, I put 3 holes to accommodate as many 6x3mm magnets. Thanks Stefan!
Useful stand for eSun vacuum pump. This stand holds the pump vertical and secure while operating. This frees you to do other things while vacuuming. Do you like my models? Consider buying me a coffee .
Wall mount for GL iNet KVM Comet (GL-RM1). Do you like my models? Consider buying me a coffee .
Box with aircraft lookalike switch panel made for shelly plus i4 and i4 DC. Do you like my models? Consider buying me a coffee .
My wife and I like to have a secure connection while traveling and not have to change wifi at every hotel if we're on the go. We also like to have home comforts with our firestick. I created this box so I could take my travel router…
Wall mount for GL iNet KVM Comet POE (GL-RM1PE). Do you like my models? Consider buying me a coffee .
Elevate the way you display your Lego creations with this custom-designed stand for the Lego 75259 Snowspeeder 20th Anniversary Edition. Created in Fusion 360, this design is a must-have for any Star Wars Lego collector. You can choose if…
Slim box to store your Sony ZX headphone with support for rolling the cable and a hole to store the 6.35mm jack adapter. You can print all in PLA or PETG, except for the seal that must be printed with a flex material. You also need n.6…
Vivarelli Delayed Pin with 62mm rod seat. Better to be printed in ABS or ASA. Use 100% Infill. Do you like my models? Consider buying me a coffee .
Mix your favorite music inspired by your favorite sport. For better results, print with 0,1 mm layer. Print in multiple colors if you can (unfortunately, I can't right now).
Parametric Slide Binder, for any page size. No support needed. Print in PLA or PETG Set the length of the page and, with a caliper, measure the thickness of the pages (rounded down). It can vary depending on the paper kind. 0.5 mm (~10…
Browser knob for Hercules console with a grooved record on top… Digital is the top, but Vinyl are our history!
Dell 130W charger holder for vertical or horizontal mount. No needs for support. Charger model HA130PM130. Dell models: Xps 15 9530 9550 9560 9570 7590 Precision 5530 5510 5540 Do you like my models? Consider buying me a coffee .
Spray holder for up to 3 cans. I keep it with the weight of my printer but I made holes for screws. Do you like my models? Consider buying me a coffee .
Add on to attach a speedlight to a Lighting Stand, like Manfrotto I made 2 versions, one sigle/vertical, double with vertical and horizontal hot shoe attachment. To secure it to the lighting stand, an M4 bolt is necessary. You can print…
These risers allow water to flow beneath the pots, thereby avoiding stagnation. You can print as few as 3 and as many as you want, depending on the pot's base circumference. Recommended material: PETG or ASA. Infill: 15% minimum. No…
Christmas Light / Stoking holder for shelf or fireplace with recess for LED candle light and silincon pads underneath. 3 different style. The stick and the base must be glued with AC glue. Silicon Pads: https://amzn.eu/d/bC8GDvq Led…
Pole mount and housing for ADS-B 1090 MHz PCB antenna https://s.click.aliexpress.com/e/_c3I3thdT You can find the mount for a 25/35/40/50/60 mm pole. Hardware needed: n.2 M3 threaded insert n.2 M3x6 mm button head socket screw n.4 M4 nuts…
30° tilt to display your Lego creation with this custom-designed stand for the Lego 75258 Anakin's Pod Racer 20th Anniversary Edition. Created in Fusion 360. Do you like my models? Consider buying me a coffee .
A perfect initiative deck for all your RPG games, especially for games like Dragonbane, which changes every round. Slide System This system can be used with or without magnets. You can customize the tag names in the F3d file. Place/Slide…
Crash Derby FIAT Panda classic Model
Box for storing the mosquito coil with or without the tray. The tray is equipped with a seat for the metal stand. The lid is available with or without knurling and with or without a seat for a spare metal stand. Tested with Fumakilla…
This “not a book” is perfect to hide a small stereo in a library…I use it in my bathroom XD. This is all made to work with Arylic Up2Stream Mini V3, that work with both wifi and bluetooth. But it can be changed with a simple bluetooth…
Mosquito coil tray, stackable, with metal stand seat. Tested with Fumakilla (Vape) coils. I recommend printing with outdoor and high-temperature-resistant plastics (ASA or ABS). Do you like my models? Consider buying me a coffee .
Scarf Hook with different legolike piece holder. Minimum fill 50%. The single mount need a 10x120 or 10x140 wall plug and the wall must be fool (brick or concrete). The Trident mount can be fixed with normal plug on drywall also. The…
Dell 130W GaN Slim charger holder for vertical or horizontal mount. No support needed. Power adapter Info Do you like my models? Consider buying me a coffee .
Taking inspiration from ice987's 3-way splitter , I created one using Jack's Quick Connect technology. I had to split it into 2 parts to simplify the printing, but added 3 holes where you could insert pieces of filament (approx. 10mm…
In the house of a friend of mine, they have a shutter at the entrance as a divider. They want to add some hooks without making a hole in the wood, so I came up with this idea. You can print it in PLA or PETG. Support is needed only for…
Easy, minimal, and personal Napkin ring for your table. Perfect as a placeholder if you have guests or to keep tidy your family napkin. Print in PLA or PNG with a minimum 3mm outer brim. F3D - Fusion 360 file (2026 version): You can…
Dell 280W GaN Slim charger holder for vertical or horizontal mount. No support needed. Power adapter Info Do you like my models? Consider buying me a coffee .
Dell 360W 7,4mm GaN Slim charger holder for vertical or horizontal mount. No support needed. Power adapter Info Do you like my models? Consider buying me a coffee .
Dell 100W GaN Slim charger holder for vertical or horizontal mount. No support needed. Power adapter Info Do you like my models? Consider buying me a coffee .
Dell 165W GaN Slim charger holder for vertical or horizontal mount. No support needed. Power adapter Info Do you like my models? Consider buying me a coffee .
Cooking Temometer's probe magnetic holder. To avoid having the dangling thermometer cable I created this magnetic holder. I print it in ASA. My advice is to print it vertically as the reference GCODE. It made for 4 magnets 5x10mm. Do you…
Dell 240W 7,4mm GaN Slim charger holder for vertical or horizontal mount. No support needed. Power adapter Info Do you like my models? Consider buying me a coffee .
Single and Double Synaptics Coralboard SL 10" Rack mount. Best print in PETG. 15% infill. 4x M3 threaded inserts 4x M3x10 mm screws (8x if you print the "double" version) The model is also provided with holes for clear filament to see the…
To wszystkie aktualnie dostępne wyniki.
