Liczymy pasujące modele…
MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…
Wydruk około 1,42 €–1,74 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is a St Louis skyline silhouette I made and printed. It is broken down into three sections to be printed larger.
Wydruk około 1,21 €–1,48 € nettoWstępna wycena jednego wariantu
MeLE Quieter3C mini PC Synta finder scope mount for astrophotography. I made this to mount my mini PC on the 80mm refractor OTA. Supports are required for the overhanging section. The design has holes for two M3 screws. I have used M3x8…
Wydruk około 1,88 €–2,29 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Thanks to reddit user hclrke for providing his design so I could fine tune the hole spacing and vertical supports. Used M3 socket cap screws of suitable length to mount the plate to the Mele as well as to mount this assemble to PPBAV2. I…
Wydruk około 1,70 €–2,08 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A quick probe holder I made for my rimmed 40 breeder. Each one will hold one probe and can be easily stacked to hold multiple probes..
Wydruk około 1,05 €–1,28 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used these corrugated plastic sheets and cut them to size to use as light blockers for my Chihiros WRGBII https://www.michaels.com/product/plastic-corrugated-board-by-creatology-M10567770 The clips just slot into the light and hold the…
Wydruk około 0,93 €–1,14 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is an ATO pipe holder for a Petco 40 breeder rimmed tank. My Smart ATO Micro wouldn't work with a rimmed aquarium so I made this to make it work. ATO:…
Wydruk około 1,27 €–1,56 € nettoWstępna wycena jednego wariantu
A mount to attach the Overclock 4C to the dovetail clamp using screws. Parts I used: https://www.amazon.com/SVBONY-Medium-Dovetail-Telescopes-Cameras/dp/B08TC3W79Z…
Wydruk około 4,13 €–5,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Apollo MSR-2 Corner wall mount
Wydruk około 0,36 €–0,44 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Apollo MSR-2 Corner Mount, longer version to attach the mmWave sensor to the corner of two walls. Print with supports. I printed with PETG.
Wydruk około 0,85 €–1,04 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Bahtinov mask for Canon EF 100-400mm f/4.5-5.6L IS II USM
Wydruk około 1,47 €–1,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this to leave as much room as possible for the mini pc to cool. As you know, it does get rather warm while imaging. Preferable to print this model with PETG as it is more resilient to both, the atmospheric heat and MiniPC's own…
Wydruk około 1,46 €–1,79 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A cap I designed to loosely fit over a 5 gallon container. This was designed with a hole so that I can feed my plant watering stake's pipe through. Watering stakes I use: https://www.amazon.com/dp/B0001IOZ98
Wydruk około 0,55 €–0,67 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A model of the Yosemite Valley in Yosemite National Park. One of the most beautiful places on Earth. This model includes the area between Tunnel View to Cloud's Nest. Category: Models
I changed the original model so that all walls are of the same height.
Made a Knob for the Z-Axis to match the one for the extruder. Updates: 04/03/2019: Reduced the object by 6% for a better fit on the Z-rod. Still loose but since I only use it to see if the Z-rod is turning, it works for my purpose.…
This is a stand for the Saturn V rocket by @RealAbsurdity (https://www.thingiverse.com/thing:45316) Note: My Saturn V model is scaled to 150% so resize this model according to your model dimensions. I threaded an armature wire through the…
Made a simple print to mount my new A3 Apex Jr. to a wall using 3M Command strips. The stock plate is too narrow to take two strips and I did not want to drill my wall to mount the Apex. I printed it upright with no supports. Original…
This is a remix of an original design that no longer available. I have changed the dimensions to match the Opal as well as modified the bottom surface to easily attach it to dovetail bars with 3M dual lock strips.
Desk stand for Waveshare ESP32-P4-WIFI6-Touch-LCD-4C based on my other design for the 3.4" version
More compact version of the excellent design by borgej I remixed to fit better in the space I have.
Wanderer Astro Flat Panel V4-EC 125mm Askar SQA55 mount. The two halves of the clamp attach using two sets of M6 Screws and hex nuts The flat panel has slots for M3 nuts and M3x12mm Screws and attaches with four sets of these; two on…
The C6 can use an internal antenna so the antenna holder was repurposed for attaching the mmWave sensor. The lid fits on the base a bit loose so I applied some superglue to the perimeter of the lid to attach it to the base. I used some 3M…
Uses M6 screws and nuts to attach the pieces to each other and M3x60mm Screws and nuts to attach the flat panel to the mount. The M3 screws are screws through the motor base and the 3d printed base to the other side. V2: Increased the…
ASI676MC AllSky Mount for MAKERELE Waterproof Junction Box Outdoor Junction Box ABS Plastic Waterproof Universal Electrical Project Box (Grey Cover, 11.8 7.8 6.3 Plastic latches) https://www.amazon.com/dp/B08PPF9RVF
Uses appropriately long M6 Screws and nuts to mount it to your dovetail.
TSL2591 mount for Allsky Enclosure cover
Vertically mount a Pegasus power box to Askar dovetail plate to the side of the OTA. Use M6 screws and nuts of appropriate length to attach it to the dovetail plate.
To wszystkie aktualnie dostępne wyniki.
