Liczymy pasujące modele…
Wanted a stronger holder for my Expand-It tools, so designed one that is extremely strong when the infill is only 10%. Also added a few small design tweaks to make it easy to insert tools and remove them. Hangs with 4, #6 drywall screws…
This is a simple mount for 10mm wide WS2812b (often known as neopixels) to mount along 2020 extrusion. It mounts the LEDs in parallel to the extrusion profile used. 100mm and 150mm lengths provided, as well as a .STEP and Fusion 360 file…
Made a sloth coaster and a holder for eight coasters. Also have a version that is plain with no sloth. The coaster holder can stand on its own, but I dadoed a piece of African Rosewood and epoxied it into place. Either would work just…
I love the SMD boxes designed by KIL0 but found them pretty difficult to fill. Therefore I designed this simple funnel that lets you open SMD tapes over it catching them, then you can pour them into the box.
Made a slightly smaller mount version of a medal holder since I didnt think it needed so much mass. Also put two tiny tabs on the front to prevent them from falling off if hit. You dont need to print with supports because they're so…
I needed a bookend for my daughter's new bookshelf and so I made one with a model of a F-16 fighter. Its ridiculous, but awesome. Its rather big, but could easily be scaled to be smaller. Put some grippy feet on the bottom so that it wont…
I liked the idea by Keko but found it to be too loose, I found the height of the pegs to be too short to make it easy to coil, and I wanted a slot to start the cable, holding the end in place.
I really liked Erikhellman's IKEA Alex Chamfered Organizer Box ( https://www.thingiverse.com/thing:4308872 ) but needed a few more sizes. I therefore made: .5x.5 .5x1 1x3 2x3 I also found them to be far taller than needed for my…
Shelf that holds 10x6 Snap SMD boxes and is stackable. You can either keep them stacked as is, glue them together, or do what I did where I used a soldering iron to melt them together.
This is a camera mount I designed using generative design in Fusion 360 to hold a generic ¼ mount camera for the CR-M4. It uses the screen hardware to mount. Designed if you have Klipper running on the printer since you dont need the…
We needed a case to protect the Badger 2040 while students used it so I designed this. It has access ports for the Quiic port and USB port. It uses the battery case that comes with the accessory kit. I made two versions. One uses 2.5mm…
The area under the hand brake on my 16 Focus ST is perfect for my phone but when I stop the phone slides into my foot well. I therefore made a small lip that I glued to the space to keep the phone from flying. Print Settings Printer…
After printing a Kindle Fire stand for my tablet, I realized my Loupedeck editing console almost fits in it. So I made a new version thats a bit wider to hold it. This way you can use a loupedeck and keyboard at the same time and not take…
This is a mount to hold the Biqu Hermit Crab Tool Plates. Can be mounted both horizontally or vertically with multiple mounting holes.
A nozzle holder for the Ultimate Drawer System that can hold 100 nozzles in rows of 10 with labels. The label sections are created for .25" labels. There is one 1u version for regular V6 nozzles, and one 2u version for volcano nozzles…
Designed this caliper holder to be fairly low profile so that it could sit under my monitor and still work well to hold my caliper. While its not super apparent, I used generative design to design the arms to hold the caliper. Edit…
This is a stand to work on Biqu Hermit Crab Tool Plates. Its a remix of my original tool plate mount. There is a tray in the front to hold parts. Its designed so that you can stop the print at the correct layer and install magnets in the…
This is a simple ring designed to replace the color rings on the Wera Kraftform Micro screwdrivers so that you can do custom colors. I replicated the fillets from the original even though they aren't really needed. If you care for them,…
We love using the DVL A50 on our @BlueRobotics BlueROV2 Heavy but I didn't like how we had to drill into the frame to mount the sensor. I therefore designed a mount that uses existing bolt holes in the frame to mount it. I printed it at a…
Needed a mount to hold 17 Wera Kraftform Micro screwdrivers from their heads so I designed this. You can either use double sided tape to mount or two screws. I included the Fusion 360 file. You can edit the amount of slots there are by…
Designed this model using generative design to create a fairly straight plant holder. Feel free to scale in the Z axis only as needed to fit your print height. To print, supports are not needed. I do recommend a brim though.
Designed this model using generative design to create a plant holder with three different holder locations spaced around an arc. Feel free to scale in the Z axis only as needed to fit your print height. To print, supports are not needed.…
EDIT: I realized my design only worked in a horizontal direction and not a vertical one. I therefore redesigned it to work vertically, have a bit more friction, and minimize the amount of material needed. This is designed to hold your…
We use this project in our introductory robotics and control engineering class to teach control feedback. Students should have a basic knowledge of programming. We use Micropython on the Raspberry Pi Pico but you can use anything your…
This is a demonstration piece to teach students the different hole types including a spotface, clearance, countersunk, blind tapped, and counterbore hole. All holes would fit a 1/2-13 bolt. The type of hole is embossed on the back.…
This allows you to hold up to two replicator 2 build plates on a wall. Mounts using standard drywall screws. Category: 3D Printer Accessories
To wszystkie aktualnie dostępne wyniki.
