Liczymy pasujące modele…
Honeycomb wall storage floating shelf adapter to be used with: https://www.printables.com/model/152592-honeycomb-storage-wall Print Settings: Layer height: .2 Perimeter: 4 Infill: 25% I used gyroid Supports: I drew on supports for the…
Wydruk około 5,74 €–7,02 € nettoWstępna wycena jednego wariantu
This is a work in progress, feedback is welcome. The two CAD pictures are V3 and the other pictures are V2. V3 pictures coming soon. I made this with the intention of being able to attach different portable monitors to a “tough” laptop,…
Wydruk około 7,85 €–9,59 € nettoWstępna wycena jednego wariantu
Print using default “.2 mm speed” setting. Assembly Insert the 3 feet through the openings in one of the base pieces. pull until they are sitting flush (sits 1mm above lip). Gently bend the main body at the seams while pushing into base…
Wydruk około 2,02 €–2,47 € nettoWstępna wycena jednego wariantu
I printed with Overture PLA. Print Settings .10mm Detail Bottom/Top with infill displayed Top/bottom layers: 0 Infill 25% (I thought honeycomb looked best) Perimeters: 5 Layer height: .10 Supports: off Bottom/Top without displayed infill…
Wydruk około 0,77 €–0,94 € nettoWstępna wycena jednego wariantu
Don't waste your money! If you are interested in vinyl wrapping vehicles or anything with significant size, you'll want some magnets to hold your vinyl pieces in place. All you need is 2 circular magnets with a radius of 5-6.5mm. Or,…
Wydruk około 0,83 €–1,02 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I used the presets with supports on build plate only. I included a color change
Printing : Print 1x main body and left/right side. Print 2x side clip for each additional layer. Print 4x strap per layer (works for me) No supports. .2mm layer height Quality defaults How to use Determine how many levels you will need by…
You will need a 6mm bamboo rod or skewer to connect all pieces. Each tray is printed with 1x spacer. I used default settings and its working great.
MK3 LCD cover with added SD card storage. Holds 3 standard SD cards PETG .2mm preset I used supports on build plate only. If you try something different, please share!
Simple model to secure and rise a MatekSYS M8Q-5883 GPS module. Printing: .2-layer height, no supports, PET-G for riser Tray: default .2mm settings seem to work well Riser: increase infill to 25-50% I used 25% gyroid with good results.…
3 versions available! Base - no drainage hole Hanging - 3 holes for hanging chain & drain hole Drain - Drain hole but no hanging holes No supports needed! I used 3x perimeters w/ .2 default settings.
To wszystkie aktualnie dostępne wyniki.
