Liczymy pasujące modele…
This is a set of 2 router templates for a bowtie inlay or bowtie joint : 1 template to route the negative part of the inlay (bowtie_template_ech1_negatif) 1 template to route the bowtie itself : you still have to cut 2 tabs of the bowtie…
This is thread holder for pegboards (1" - 2.54 mm hole spacing and about 5mm hole diameter). Printed in PLA. If you are printing a large amout of them, be careful to have the right printer settings to avoid warping
This is a Festool router guide bushing adapter. It is designed for a Festool OF 1000 EB, but it should also work for other festool routers. Thanks to the holes, the dust extraction works very well. The size I made is for an 8 mm router…
BCD (Bolt Circle Diameter) : 122 mm It has the same size than a normal sprocket (3 mm deep) and has five 10 mm holes with 12 x 1 mm counterbore. See picture for the other dimensions. I printed this sprocket guard to fit on my vintage…
Ideal for cabinets Mounted part : 50 mm square, with 4 holes (3 mm diameter) Foot : 50 mm in diameter Minimum height : 27 mm Max height : depending on the screw Printed in PLA with 0.20 mm per layer, 50% grid infill for heavy cabinet, 4…
This mount allows to fix the kryptonite lock mount on a 28 mm diameter tube. Parts 2 screws : m4 x 35 mm 2 m4 washers 2 m4 nuts Printing Both models can be printed without supports : it will be necessary to re drill the holes to remove…
Sonor AQX 20 mm bass drum leg extension I use them on my 18" bass drum with a 3d printed riser. They slide onto the existing leg. Simply printed upside down with no supports and 0.2 mm layer height Tap the inside thread : I used an M10…
To wszystkie aktualnie dostępne wyniki.
