P
Printableslanguer
Filament Spatula
Simple spatula remix from Tor G - scaled to print on Mini
Wydruk około 1,34 €–1,64 € nettoWstępna wycena jednego wariantu
- Pobrania
- 328
- Polubienia
- 24
- Ocena
- 5
Wszystkie modele
Liczymy pasujące modele…
P
Printableslanguer
PS4 Game Holder for Mini
I wanted to use the design from Kashimi but it would not print on the Mini. Rather than trying to modify it (i.e. remix it), I opted for creating one of my own. It prints on the Mini and holds up to six games (seven if you opt to use the…
Wydruk około 5,97 €–7,30 € nettoWstępna wycena jednego wariantu
- Pobrania
- 239
- Polubienia
- 18
- Ocena
- 4,67
P
Printableslanguer
Phone Stand for Cup Holder (v2)
Phone Stand for use with vehicle cup holder. Remixed to provide deeper based and better grip to cup holder. Phone can be used with phone in vertical or horizontal position. The stand swivels by moving it within the cup holder. It has a…
Wydruk około 5,13 €–6,27 € nettoWstępna wycena jednego wariantu
- Pobrania
- 227
- Polubienia
- 23
- Ocena
- 4,5
P
Printableslanguer
Remix of DarthVader Pen/Pencil Cup
Remixed DarthVader Pen/Pencil Cup from @SDHayes - increased to 120% on base and 115% height to better match StormTrooper companion ( Stormtrooper penholder by mattebarrett - Thingiverse ). Printed without supports on Atomic PLA - used…
Wydruk około 6,18 €–7,55 € nettoWstępna wycena jednego wariantu
- Pobrania
- 215
- Polubienia
- 27
- Ocena
- 5
P
Printableslanguer
Phone Stand for Cup Holder
Phone Stand for use with vehicle cup holder. Can be used with phone in vertical or horizontal position. The stand swivels by moving it within the cup holder. It has a built-in 30deg slant to provide a good viewing angle which can be…
Wydruk około 5,64 €–6,90 € nettoWstępna wycena jednego wariantu
- Pobrania
- 189
- Polubienia
- 28
- Ocena
- 0
P
Printableslanguer
CloneTrooper Pen Cup (remix)
CloneTrooper Pen Cup - remixed from https://www.thingiverse.com/thing:4535792 Original model reduced to 90% to match DarthVader Pencil Cup. Printed in Atomic PLA, 10% infill, no supports. Used variable layer height option.
Wydruk około 6,59 €–8,05 € nettoWstępna wycena jednego wariantu
- Pobrania
- 102
- Polubienia
- 23
- Ocena
- 5
P
Printableslanguer
LED Strip Mount for Prusa Mini
LED Strip for PrusaMini - remixed from Brionac's LED Light Bar. Extended the arm distance from the Z-axis and added extender so the light fixture covers the full bed. Printed in PLA Galaxy Black. No supports needed. Brim used for…
Wydruk około 3,68 €–4,50 € nettoWstępna wycena jednego wariantu
- Pobrania
- 84
- Polubienia
- 18
- Ocena
- 5
P
Printableslanguer
Adafruit BQ24074 Solar LiPo Charger
Bottom case for Adafruit's BQ24074 Solar LiPo Charger with added mounting ears. Remixed from Voltaic Enclosures @VoltaicEnclosure
Wydruk około 0,79 €–0,97 € nettoWstępna wycena jednego wariantu
- Pobrania
- 33
- Polubienia
- 5
- Ocena
- 0
P
Printableslanguer
Paint Mixer / Stirrer (remix)
Paint Mixer - remixed from https://www.printables.com/prints/171895-paint-mixer to give it more robustness on the shaft element. TinkerCad file: https://www.tinkercad.com/things/6CBctKDDngC Shaft diameter increased, base/propeller…
- Pobrania
- 938
- Polubienia
- 95
- Ocena
- 4,95
P
Printableslanguer
Simple AA battery box that holds 8 batteries
Simple AA battery box that holds 8 batteries Remixed from Sarti @ thingiverse (https://www.thingiverse.com/thing:4582694). Removed top and modified bottom to fit my purpose of holding rechargeable batteries for XBOX game controller.…
- Pobrania
- 141
- Polubienia
- 12
- Ocena
- 5
P
Printableslanguer
Enclosure for Sparkfun's Openscale and 1kg - 20kg Strain Gauge Load Cell
This is an enclosure (bottom, top, feet) for the Sparkfun's Openscale and also a plate for the load cell. It should work with the strain gauge load cells from uXcell, Sparkfun, and Adafruit; 80mm x 12.7mm x 12.7mm (note that Adafruit's…
- Pobrania
- 129
- Polubienia
- 9
- Ocena
- 0
P
Printableslanguer
Dog Poop Bag Holder (remix)
Remix of PoopBagHolder from @barcafan39. Works with standard doggie poop bag rolls. Base/bottom is unchanged from original, but top is remixed to reduce the XY to 99% dimensions to make it a right-fit to the bottom piece and replaced the…
- Pobrania
- 122
- Polubienia
- 12
- Ocena
- 5
P
Printableslanguer
Simple CR123A battery box that holds 8 batteries
CR123A battery box that holds 8 batteries Based on a previous model I made for AA batteries; https://www.prusaprinters.org/prints/119803-simple-aa-battery-box-that-holds-8-batteries. Modified from AA design to fit purpose of holding Arlo…
- Pobrania
- 96
- Polubienia
- 11
- Ocena
- 5
P
Printableslanguer
Template for IKEA's HACKAS Cabinet/Drawer Handle
This is a simple template for IKEA's HACKAS Cabinet/Drawer Handle. Needed to install a number of these handles on closet doors, and making a quick template became pretty handy. Printed in Atomic PLA. Update: Added STL and gCode files for…
- Pobrania
- 85
- Polubienia
- 4
- Ocena
- 0
P
Printableslanguer
Crutch Side Attachment(s)
Recent events had me on crutches - this is meant to be a system you can snap on and off attachments to the side of the crutches. The “crutchHolderBase” attaches to the side of the crutch using a #8 bolt, a washer, and a nut. The…
- Pobrania
- 49
- Polubienia
- 9
- Ocena
- 5
P
Printableslanguer
Enclosure for PicoW and RFM69HCW hosted on ElectroCookie PCB
This is an enlosure (bottom and top) for the PicoW while hosted on an ElectroCookie PCB that measures 2.05" x 3.5". The PCB's mounting holes use M3 for the center holes and M2 for the corner ones. The PCB mounts to the bottom part of the…
- Pobrania
- 47
- Polubienia
- 5
- Ocena
- 0
P
Printableslanguer
Dell D600 Dock Stand
Simple stands for Dell's D6000 docking station. These are meant to sit on the table top. V1 has smooth edges, V2 is tight so that it can sit starting against a wall. The docking station sits pretty tight within the stand, going forward…
- Pobrania
- 46
- Polubienia
- 7
- Ocena
- 5
P
Printableslanguer
Mount for SparkFun BlackBoard & RedBoard Plus
Simple mount for Sparkfun's Blackboard C and RedBoard Plus. Needed something similar to what is commonly available for Arduino Uno. Two versions available; one with ears for mounting and a second one without. Printed in Atomic PLA with…
- Pobrania
- 44
- Polubienia
- 3
- Ocena
- 0
P
Printableslanguer
Headset Hanger for Jabra Evolve 65
Basic headset hanger for Jabra Evolve 65. Meant to attach to side of modular hanging cabinet. Printed in Atomic PLA. Supports required (base plate only).
- Pobrania
- 38
- Polubienia
- 5
- Ocena
- 0
P
Printableslanguer
X-Acto Gripster Cover
Found myself in need of a blade cover for the X-Acto Gripster Knife. Printed in Atomic PLA. I recommend to set seamPosition to Rear or Random. EDIT: v2 makes the tip rectangular and creates a “natural” pocket for the blade.
- Pobrania
- 36
- Polubienia
- 3
- Ocena
- 5
P
Printableslanguer
Vertical / Hanging Tray for Roku Remote, TV Remote and Wireless Remote for AC Outlet
Vertical /Hanging Tray to house Philips all-in-on TV remote control, Etekcity Wireless Remote Control Outlet Light Switch (or similar), and added Roku remote control. Simple design with access to buttons while in the cradle, while cradle…
- Pobrania
- 35
- Polubienia
- 6
- Ocena
- 0
P
Printableslanguer
Simple holder for poop bag rolls
Simple poop bag holder for standard bags. Attaches via cap/lid. Printed in AtomicFilament PLA. Loosely based on work from TinaBelcher ( https://www.thingiverse.com/thing:2098658 ). I wasn't happy with how that turned out, so I made one of…
- Pobrania
- 31
- Polubienia
- 7
- Ocena
- 0
P
Printableslanguer
TV/ROKU Remote Control Organizer
Needed a means to store three specific remotes (Philips all-in-one, Roku, and generic wireless AC plug) in horizontal fashion. This does the trick and is offset so all three remotes push out of the holder/caddy by about the same length.…
- Pobrania
- 21
- Polubienia
- 5
- Ocena
- 0
P
Printableslanguer
Flux Capacitor
My rendition of the flux capacitor so that I could incorporate it in a Doc Brown costume. Used three small pieces of airline tubing for the interconnect and one battery operated Fairy String LED set. Designed on 123D, printed on DaVinci…
- Pobrania
- 18
- Polubienia
- 9
- Ocena
- 0
P
Printableslanguer
Coleman QuickPump Adapter
Additional adapter/nozzle for Coleman's QuickPump. Needed a finer (smaller diameter) nozzle (adapter) to fit into some smallish inflatable kiddie pool for a water day at school. Got one designed and printed in about two hours, and in one…
- Pobrania
- 16
- Polubienia
- 0
- Ocena
- 0
P
Printableslanguer
Small Weather Enclosure for RJ11 outside connection
Small enclosure to house two RJ11 connectors to protect from weather. Can also be used for any other general connections as long as it fits within the internal dimensions of the box. I had a need to house two RJ11 connectors to protect…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
Printableslanguer
Case for RP2040 Radio Fruit (Adafruit Feather RP2040 w RFM69)
Case for Adafruit's RP2040 Radio Fruit (RP2040 Feather w RFM69) to house feather and helical antenna. Added wall and access feature (hole to allow antenna to stick through) to house SMA helical antenna (short stubby). Also added feature…
- Pobrania
- 14
- Polubienia
- 4
- Ocena
- 0
P
Printableslanguer
Nighthawk R6850 Vertical Base
Simple vertical base for Nighthawk R6850 Router v1 → first model v2 → second model with some rounded corners printed in Atomic PLA - no supports, variable height modifier, brim (always)
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
Printableslanguer
Dell D6000 Dock Desk Adapter/Stand
Simple Dell D6000 docking station horizontal stand. Sits on top of standard rectangular support crossbars (see photo). Docking station sits completely inside stand, and stand sits on top of desk rectangular crossbar. Model was split into…
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printableslanguer
Virtjoule Heat Set Insert Case
Case for Virtjoule Heat-set Tips (Amazon - f or Hakko FX-888D and Weller SP40NKUS ). They come in simple holder with no lid in plastic bag. This model prints in two pieces (case and lid) and provides means to store all five het set tips…
- Pobrania
- 9
- Polubienia
- 3
- Ocena
- 0
P
Printableslanguer
A&H Baking Soda Decorative Cover
Easy-to-use decorative cover to place over those commonly used Arm&Hammer Baking Soda odor boxes. It slips over the top of the box and has openings to match the natural openings on the boxes and see-thru opening for the use-by date. And…
- Pobrania
- 8
- Polubienia
- 2
- Ocena
- 0
P
Printableslanguer
Storage Case for Soldering Tips from ShineNow
Basic storage case for soldering tips included with ShineNow 60W Digital Soldering Iron (Amazon B0CJR4) Holds the 6 tips that come with the iron; uses magnets on both case and lid to secure it in place. Print the base flat (see picture)…
- Pobrania
- 8
- Polubienia
- 0
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.