Liczymy pasujące modele…
Korry style switch used extensively in Overhead and MIP. Designed to look and feel similar to a real Korry, with focus on a smooth button movement and even illumination, with no light bleed between top and bottom indicators. Tolerance…
Dimensionally accurate three-part design that can be printed and used without painting or post processing. Designed to be backlit for illuminated marker line Main switch body printed in matte grey PLA, though can be printed in any colour…
Dimensionally accurate three-part design that can be printed and used without any painting or post processing. Designed to be backlit for illuminated marker line Main switch body printed in matte grey PLA, though can be printed in any…
Dimensionally accurate MCDU with models for all buttons and lenses. Designed in 3 layers, with top layer 3D printed and middle and bottom layers either 3D printed, or CNC machined from 3mm acrylic. Designed to be screwed or glued together…
An EFIS knob designed for 6mm shaft rotary switch. Marker line can be backlit if lightguide is printed in transparent or opaque material. Retained on shaft with 3mm grub screw Switch body printed in matte grey PLA. Lightguide printed in…
Design to recreate the stepped and gated functionality of the Airbus A320 Flaps lever. Design objective was to create a realistic feel, with a smooth, solid and weighty action. The design therefore includes steel and brass shafts plus an…
Dimensionally accurate three layer panel. Designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear. Designed to be…
Dimensionally accurate design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it feels…
Models for the upper and lower Frequency selector Knobs on the Airbus A320 RMP. Knobs are both in two parts to allow printing with top face upwards to achieve best visible finish. Printed in matte grey PLA, 100% infill. Knobs are a push…
Three layer panel plus rotary switch mounting plate. Panels designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm…
Korry style switch for the 7 buttons on A320 EFIS panel. 3D printed parts are Button Light Guide and Button Housing. Both printed in Black PLA, 100% infill, 0.15 layer height. Button Top Indicator and Bottom Legend are CNC machined from…
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
Dimensionally accurate three-part design that can be printed without any painting or post processing. Designed to be fitted to 6mm shaft. Main body printed in matte black PLA Arrow infill printed in white PLA Label insert printed in matte…
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
Dimensionally accurate three layer panel. Designed to be CNC routed from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear. Designed to be…
Set of 6 parts to create lift and turn movement for Airbus Parking Brake Handle. Works with 90 degree Cam Switch 20A 1 Pole ON/OFF 90, which is pictured and can be found online Designed to work with my PARK BRK handle model:…
Dimensionally accurate two-part design that can be printed without supports or overhang. Can be printed in matte grey and used without any painting or post processing. Knob includes chamfers on all edges, like in the real aircraft, so it…
Design to recreate the Push Pull functionality needed for the ALT, Heading, Speed and Vertical Speed controls on the Airbus FCU. Design objective was to create a realistic feel, with a smooth, solid and weighty action. Push and Pull…
Dimensionally accurate design for mounting on flaps lever shaft. Design needs support when printing, or splitting into two parts and then gluing. Printed in PLA with 100% infill. Variable layer height can be used on upper knob to reduce…
Dimensionally accurate two-part design that can be printed and used without any painting or post processing. Main switch body printed in matte grey PLA, though can be printed in any colour and painted Marker line printed in white PLA or…
Reasonably dimensionally accurate flaps panel, designed to fit Skalarki size Pedestal. Panel size 148.5mm x 100mm. Solves the problem, how to engrave position legend on curved surface. 3 layer panel designed to be routed from 3mm cast…
Korry style switch used extensively in Overhead and MIP. Designed to look and feel similar to a real Korry, with focus on a smooth button movement and even illumination, with no light bleed between top and bottom indicators. Tolerance…
I suspect they are rubber in the real aeroplane, but you're probably not going to actually put your feet on them. Printed in matte grey PLA. I used 50% infill to give them a feeling of solidity, but could be as low as 10% to save…
Three part design that can be printed and used without any painting or post processing. Designed to be backlit for illuminated marker line Main switch body printed in matte grey PLA, though can be printed in any colour and painted Light…
Model for the 15 Reception audio level control knobs on the Airbus A320 ACP. Not a perfect replica as the real knobs are illuminated when released out and have a collar that fits into the panel, but for me, close enough. Printed in matte…
Korry style switch used on ECAM Control Panel in Pedestal. Designed to look similar to a real switch, with focus on a smooth click movement and even illumination, with no light bleed between top and bottom indicators. Tolerance between…
Dimensionally accurate two-part design that can be printed and used without any painting or post processing. Main switch body printed in matte grey PLA, though can be printed in any colour and painted Marker line printed in white PLA or…
Realistic model of Airbus A320 cockpit Microphone which mounts at rear of sidestick console. Print all body and mesh parts in black PLA, 100% infill for strength and solid feel. Model is split into parts so it can be printed without…
Three layer panel and rotary switch holder. Panels designed to be CNC or laser cut from 3mm cast acrylic, but can be 3D printed if backlighting is not required. Top panel 3mm Opal. Middle panel 3mm frosted clear. Bottom panel 3mm clear.…
Korry style switch for the Autopilot and Auto Throttle buttons on A320 FCU panel. 3D printed parts are Button Light Guide and Button Housing. Both printed in Black PLA, 100% infill, 0.15 layer height. An alternative Housing design in two…
The 3018 Pro from SainSmart is a great little CNC that is suprisingly good given how inexpensive it is. It's main weakness, as many have identified, is the lack of stiffness and play in the axis and spindle holder which causes the bit to…
My latest updated version with improvements can be downloaded from MakerWorld: https://makerworld.com/en/models/1714786-a320-rudder-pedals#profileId-1819932 Reasonably dimensionally accurate Airbus 320 style Rudder Pedals that clamp onto…
Dimensionally accurate design that can be printed and used without any painting or post processing. Switch body printed in matte dark grey PLA, though can be printed in any colour and painted Body printed with 0.15 layer height, 100%…
A strong and stable mount for a Thrustmaster HOTAS magnetic base combined with FlightSimProjects Airbus sidestick and gaiter. Designed to be mounted in a side cabinet with a 12mm MDF or similar top panel. Hole size required is 168mm x…
Mechanism to create realistic 30 degree sprung movement for rudder trim knob. Works with pair of microswitches. Designed to work with my Rudder Trim Knob: Airbus A320 Rudder Trim Knob by MANTOGA | Download free STL model | Printables.com…
Reasonably dimensionally accurate concentric brightness knobs. To be honest, this design pushes the limits for a 0.4mm nozzle and would ideally be printed with a 0.2mm, but as the pictues show you can just about get away with 0.4mm. The…
Realistic recreation of the Microphone holder at the rear of A320 Sidestick Cabinet. Designed for cabinet with 5 degree slope, but would work if top was flat. Print in black PLA, 100% infill for strength. Both a complete model and a…
A dust extraction nozle designed to mount to my improved 3018 spindle holder found here: https://www.printables.com/model/523635-3018-cnc-z-and-x-axis-upgrade Could also be easily mounted to the standard 3018 spindle holder Nozzle sits…
Dimensionally accurate knob for mounting on Speed Brake lever shaft. Design can be printed vertically without support, or split into two parts and then glued. Printed in PLA with 100% infill. Variable layer height can be used to reduce…
Mount and shaft extender for rotary switch, now with PCB for LEDs. Base printed in Black PLA. Light Pipe Upper and Shaft Extender in transparent PETG. All printed with 100% infill for strength. Base and Upper are glued together and then…
Print in PLA or PETG. 10 to 50% infill, depending how strong you need it. Use with any type of spring or ratchet clamp to align parts at 90 degrees.
Vent Cover and 120mm fan mounting plate for front face of Airbus A320 Sidestick Cabinet. Designed for MDF Sidestick Cabinet. Vent cover is glued in place. Fan mounting plate is screwed from inside. Print in matte PLA, any infill %. For…
Armrest Ramp for rear of Sidestick Cabinet. Designed for cabinet with 5 degree slope and 10mm radius on top panel. Dimensionally accurate with real aircraft. Print in matte or gloss black PLA, 50% infill for solidity and 0.15 layer height.
Mechanical, threaded adapter to attach Thrustmaster grips to Winwing Orion2 base. Can be used with FS Projects Airbus sidestick grip. Wiring needs to be modified to change from 6 pin mini DIN to 5 pin mini DIN. Picture of wiring (found on…
Designed for rear of Sidestick Cabinet with 5 degree slope. Print body in matte black PLA, 50% infill for solidity Print lens in translucent PETG. 50% infill produces good transmission and diffusion, but can be varied to suit material and…
Small rectangular recess / holder (I'm sure it isn't used as an ash tray these days!). Design is in two parts to enable printing without supports. Two parts have locating lugs and can be assembled with CA glue Best printed in matte black…
This is a niche use case, but maybe someone will find it useful like me for combining two excellent tools to easily and accurately cut shapes from 6 and 12mm MDF. Guide is a two part clamped adapter that fits around the DCS571 base to…
Simple part to mimic small metal plate used to cover sidestick lockout mechanism. Print in matte PLA, 100% infill.
The Eibos Polyphemus is an excellent 3D filament drier that works well and has lots of great features. If used when printing, the one awkward part of the design is the PTFE tubes feed through the top of the lid and the whole transparent…
Mount and shaft extender for rotary switch, now with PCB for LEDs. Base printed in Black PLA. Light Pipe Upper and Shaft Extender in transparent PETG. All printed with 100% infill for strength. Base and Upper are glued together and then…
Paddle to allow “willing workers” to obtain “batch” of white and red beads from bead container. Designed to be used with 3200 6mm white beads mixed with 800 6mm red beads in an ice cream, or small food tub. Print in PLA, 50% infill. Small…
Print in PLA or PETG, 100% infill
Two models are provided. One for standard (large) spray cans and one for smaller Humbrol type cans. For both, spring fingers accomodate slight variations in size and hold cans firmly in place. Model is designed to use 8mm coach bolt as…
Alternative Cam profile for Winwing Orion 2 joystick base. Cam includes a soft centre detent and a more linear movement force than the standard Cam. Not quite as smooth as the polished metal cams, but I can't feel difference in use. Print…
Building a home cockpit, there are many small buttons to engrave. If they are for Korry like buttons and the legend is made in two halves, they need to be held and engraved one by one. Tape and CA glue works well, but is time consuming.…
To wszystkie aktualnie dostępne wyniki.
