Liczymy pasujące modele…
Much of the piece is telescoped over the barrel and there is a multichambered accumulator at the rear half. It attaches with any of these adaptor options . For standard factory barrels, try these 4.5" models . A matching pump arm and…
Adding only 4.5" to overall length but having lots of expansion room, this moderator attaches with any of these adaptor options . Those using extended barrels will want to look here . A matching pump arm and buttstock are forthcoming;…
Mk.3 revision posted now! Strengthening rib minimized to be easily removed if desired; removable support built into the main lug. My recommendation is to grind out a bit of the pump arm to clear the rib and keep the part stronger. The…
Cut down from the Mk.2 buttstock and given just a bit of palm swell. Will help stabilize aim with one or both hands and compliments the accompanying Pump Arm fairly well. This is an ambidextrous model, though one may forego or install the…
Trying to balance utility and width, this improved furniture is designed to clear its full sweep even with one of my standard or extended suppressors attached. Well-complimented by these improved grips . Though most factory units are…
With interchangeable plates and grips for all your hexagon needs, this stock has a relatively tight length-of-pull and is tall enough for good scope alignment. Bed the top with some flexible adhesive or RTV to reduce vibration/noise from…
Trying to balance utility and width, this improved furniture is designed to clear its full sweep even with one of my standard or extended suppressors attached. Though most factory units are attached with roll pins, this model has recesses…
You must add a sleeve and cap to contain the telescoped baffle core. Final baffle is tight and will need touchup with a drill, especially if used for .20 or .22 caliber pellets. This is probably best as a learning tool and experimental…
Covers that flat spot left when the rear sight is removed to install a scope or other optics. Options are for a pan head or flat head screw. A shorter screw will be needed, 8/32 x ¾" Also included with the barrel adapters for my…
15x15mm blocks to grip mic holders in some articulated booms.
To wszystkie aktualnie dostępne wyniki.
