Liczymy pasujące modele…
module holder (SW3516 or SW3518) with screw clamp For a 27-30mm hole for mounting P.S.: if the module falls out of your model, use glue type B7000, B8000, T7000 or others Changes in the update: (v2 update 1-Feb-2025) The shape of the nut…
to install xt30 Male you have to cut off the bumps (for female such actions are not necessary)
3D model dimensions: washer 20mm, washer height 1mm, seat 16.5mm, plug height 6mm, recommended plastic PETG
I printed it on PETG plastic, but you can print it on TPU or flex if you need flexibility. Stick it on with double-sided tape or glue compatible with your plastic.I printed it on PETG plastic, but you can print it on TPU or flex if you…
if the connector falls out, use glue type B7000, B8000, T7000 or others
v1 -- fixation with double-sided adhesive tape or glue v1.1 -- fixation with screws upd: 24 Dec 2024, fixed the hole for the cable has been compatible devices: Vodafone R227 МТС 8213FT
Printing without supports To install xt30 Male you have to cut off the bumps (for female such actions are not necessary) Cut off the skirt near the contacts
Original: based on v2 (1-Feb-2025) https://www.printables.com/model/835513-screw-holder-sw3516-sw3518 charger board case
if the connector falls out, use glue type B7000, B8000, T7000 or others
For fixing M2 module For fixing M2-M3 panels
Sealed/waterproof case/holder for XT30 male Thread: М16х2 - 8mm Thread for fixing: М16х2 - 6mm For sealing needed O-rings 16-18mm x 1-2mm Recommended PET/PETG Сable AWG-16 In the photo (the safest for this sealed) You will need to grind…
Need M3 12mm+ screw (6 pcs.) P.S.: I do not recommend loading more than 10A 250V (2500W)
You will need for assembly: 2-4 studs m3 (10-15 mm) 2-4 nuts m3 3 brass spacers m4 (diameter 6 mm) 3 screws m4 30 mm if your original stand is lost, use this model…
Holder from CKCS U1E (Implemented on the XMP52C microcircuit) Screws for fixing module - m2.5 (6-8mm)
For fixing module screw - M2, for fixing panels - M2 or M3
The model is made with a 0.2mm gap, if your printer prints a loose model, glue it with glue (like B7000) or change the dimensions in a slicer application :)
A box inside SUNLU 1kg filament spool for silica gel for roller dryers, as well as for storage in zip-lock bags (without vacuuming). P.S.: More is not better, use about 30g (half of the box or one full portion of the extractor) so that it…
Screws for fixing the panel - m3 Holder from CKCS U1E (Implemented on the XMP52C microcircuit) Screws for fixing module - m2.5 (6-8mm) and HW-774 (Chinese copy with worn-out markings) Screws for fixing module - m2 (6-8mm)
Hi, I was recently disassembling a friend's scooter and saw the controller, and I got an idea :) A little bit of internet, a little bit of money and a built-in battery from another scooter brought it back to life. You will need: XT30…
For assembly you will need: IP2312 M3x30-40 screw M3x6-8 screw 2 M3 nuts Pen spring 2 O-type terminals Wires, soldering iron and P7000 glue
For assembly you will also need a ready-made bayed DIY-power adapter from China or a print -- Makita 18-21v bayonet holder DC-DC Up module - HW-449 TL494 voltmeter 0,36" DSN-DVM-368 v3.01 22х14х10mm (4.5-30v) of course SW3516/SW3518 + M3…
add some solidol/lithol inside so that it does not jam the spring P.S: I recommend drilling to 6 mm and using M6x25 screws and accordingly nuts
P.S.: use glue type B7000, B8000, T7000 or others
To wszystkie aktualnie dostępne wyniki.
