Liczymy pasujące modele…
***I made an updated version that should fix the slicing issues. I added the model here, but for the full page and description, check out the fixels 2. no supports required at all, much easier to print*** This is my current version of 3d…
The plain model doesn't have connecting holes for the pins. The Center piece has holes on on sides. The others only have holes on the sides that need to be connected.
*This is the updated version of my previous design in-order to make printing and remixing easier. Fixel 2 This is a print in place, expandable, fabric that doesn't require any supports. This design is made up of hexagons with small ball…
Print the Sheath on the side and support the clip.
Various ways to connect 2-6, 20mmx20mm Aluminum Extrusion.
This fits most bars, popcorn and snacks nicely but is custom fit to my cabinet, so check your dimensions! it is 500mm x 275mm There is a full size stl that you can divide yourself, or one that is already slip into 6 parts that will fit…
examples of volumetric lattices made in fusion 360
Although it will will with most setting, you can change the settings to fit the workload. For heavy amount of garden work: 4 walls, 50% gyroid infill, petg-cg For standard workload 2 walls, 15% gyroid infill, PLA
It's a slingshot. Not super strong yet (unless y'all use nylon cf or something) but I think this project is at a cool point. I have some ideas to improve it, but have fun with this one until then!
This is dimensioned around my silverware and what I use, so check your dimensions first before printing. There is a full size stl that you can use to cut down to your printer dimensions, or 4 parts that fit nicely on a Bambu x1
Description This is a BIG print. This takes about 2 days of continuous printing and will cost about 75$ in material. Print Settings Base Pieces (9) Material: PLA Layer height: .25 Wall loops: 3 Top shell: 4 Bottom shell: 3 Infill: 8%…
Print with no supports or supports on built place only
This is a BIG print with 75 nearly full print volume pieces. Planning how you buy your materials, and have your print settings will be the difference between this costing about $470 and $1500+. At this scale, a single percentage increase…
I like herringbone gears because they doesn't slip apart when printed in place. With this gear I wanted to they to extend the concert of a herringbone gear.
Mirrors not included. 25mm x25mm and about 1.2mm thick. Id recommend calling it up slightly to make it easier to fit them in.
Optimize speaker placement, cable management, and organization by placing these prints around.
This gearing system is entirely print in place with a nice smooth motion. There are 2 STL's, a regular (with .2mm spacing that works well on will tuned machines) and a “loose” (with .5mm spacing that works with not so well tuned…
A Low poly aesthetic Wall Mount for apple HomePod mini speaks
The slots fit a few brands, but is snug fit to these.
This is an awesome reason to start getting into conductive filament. It's an awesome feeling to take your print off the printer, plug it into the computer, and have it do something. This project is still experimental, but functional, and…
To wszystkie aktualnie dostępne wyniki.
