Liczymy pasujące modele…
UPDATE: 07/03/23 I have gone ahead and added a version with looser tolerances for those who were having issues printing the original model. The original model had clearances of 0.3mm minimum and I have loosened them up to 0.45mm minimum.…
Here is a print in place articulated fish I designed a while back, I hope you all like it! There are a few different version, though I only have a scalable version in one design, hopefully the file names give enough of a description.
Here is an E-stop key cap I printed mine out of PETG though PLA is probably okay. No Supports for any of the components needed I printed my parts at 0.2 layers with a 0.4 nozzle. If you want finer detail you can try a smaller nozzle…
UPDATE(2/5/23) IMPORTANT PLEASE READ! It seems that after the case stays closed for a while the “arm” becomes deformed and doesn't spring to its original position making the case not open correctly so I designed a new base cap and path…
Here it is, the print in place mini vise. Once its completed you will need to bend the mounting brackets on the side by 90°. There are some detents with corresponding mating geometry so you should hear a slight click when it goes in. No…
Here is a j-max manual to electric coffee grinder conversion build. Happy printing and thank you for the support! Notes This build requires soldering and de-soldering of a component from the power supply. Soldering mains and dc side will…
Here it is y’all, the fancy pants trash bin! You will need the following supplies: - 0.5 x 5 x 15mm Compression Springs (QTY.1) - Music Wire 0.031” Dia. - 3mm Steel Stock - Flat Head Screw Set - Set Screw Set - Socket Head Cap Screw Set…
Here it is y’all the 3D printed Nintendo Switch Docking Case MKII You will need a 3D Printer capable of printing a part that is 270x136x105mm You will need the following supplies: - 0.5 x 4 x 15mm Compression Springs (QTY.5) - Music Wire…
Here it is, the 3D printed Nintendo Switch Docking Case MKIII. In this update I cut the base into separate pieces so the whole case can be printed on smaller format printers. All parts are printable on Prusa i3 and ender3 sized printers.…
About: If you want stronger pliers than you can increase the wall line count, I used 10 walls for mine. NO SUPPORTS NEEDED! NO BRIMS! I printed mine out of PETG at 0.3mm layers The minimum clearance in this model is about 0.3mm Your…
Here it is the print in place micro vise! I printed mine out of PETG at 0.3mm layers. Your printer will need to be capable of printing 0.3mm gaps between print in place parts. The more walls you add the stronger it should be. No supports…
Here is the parameterized version of the push latch case. You will need fusion360 to make changes to the parameters. The minimum possible size is 41mmx11mmx28mm (LxWxH) I would recommend extending the length and width over height, but if…
The next flower in the series, a daffodil! I recommend printing the part in PETG. I printed mine at 0.3 layer height with 0.45 line width. The parts are all printable without any supports. You will need to do some bending/forming of the…
Here is a needle nose variation of my print in place vise grips! I printed mine at 80% scale with a 0.4mm nozzle and 0.3mm layers out of PETG and it worked great! Happy Printing!
Here it is the print in place articulated robot. I printed mine at 0.2mm layer heights without too much issue. You may want to put some glue stick down if you're having trouble with adhesion. No supports needed in slicer. You will need to…
I printed this guy with some gold pla filament at 100% scale and its pretty big but I like it that way! No supports but you may want to scale it down a little.
Here is a model for some print in place parallel clamps. They're not the most useful but they're fun to fidget around with. I printed mine out of PETG with a 0.4 nozzle and 0.3mm layers. Happy Printing!
Here it is, the buildable forsythia flower. I took inspiration from the lego flowers that I enjoy putting together. These flowers aren't quite as easy to put together as lego flowers but they are fairly easy once you have all the parts…
Here is the slow open shutter container. See build instructions PDF for assembly help. You will need the following supplies: Pin List: -3mm Dia. 135.5mm long(QTY.4) -3mm Dia. 159.5mm long(QTY.1) Screw List: -M3 x 20mm long Socket Head Cap…
Here are some vases I designed, hope you like em! I would recommend printing the vases with a larger diameter nozzle, I printed mine with a 1.2mm dia. nozzle out of PETG and they are very tough! This is a solid model that will need to be…
The dispenser holds around 18 cards(card thickness = 0.016"). The dispenser also works for slightly thinner and thicker cards. You will need the following components: M1-M1.7 Screw Kit Screw List: M1.2 x 5mm lg. (QTY.2) M1.2 x 6mm lg.…
Here is a spring loaded desk organizer. You will need the following components: Constant Force Spring (QTY. 1) M3 x 8 Countersunk Head Screw (QTY. 2) 25mm LG. 3mm Rod (QTY. 1) #8 Wood Screw (QTY.1) Assembly Notes: The wood screw is used…
Here is a vase to hold your paper napkins if you got em. The vase was designed for napkins that are about 165mm squares. I would recommend printing with a larger nozzle out of tougher filament- I printed mine with a 1.2mm nozzle out of…
This is the newest version of the j-max coffee grinder conversion build with many improvements: Reduced hardware and hardware type Use of off-the-shelf items for the motor to grinder axle conversion Cut main structure into two smaller…
To wszystkie aktualnie dostępne wyniki.
