Wszystkie modele

Garden hose coupler

Simple garden hose quick release coupler. The O-Ring can also be found in my other models.

Gardenhose to 3/4 thread adapter

Standard gardena / garden hose to ¾ pipe thread adapter, as it is used in e.g. sprinkler systems, pumps or water switches. Contains multiple different designs. Seal and O-Ring can also be found in my other models. Print in high quality…

Garden Hose seal and O-Ring

These are TPU seals for garden hose adapters. Print in high quality for good fit This post contains multiple different models. There is work in progress to update the print profiles and adding even more seal and O-ring models to provide a…

Irrigation pipe to garden hose system adapter

16 mm irrigation pipe to gardena / garden hose adapter that screws onto ¾" threads. Needs a rubber seal and O-Ring that can be found in my other models or bought from your local hardware store. Might need a pipe clamp on the irrigation…

Garden hose Y coupler

Standard gardena / garden hose Y coupler. The required O-Ring can also be found with my other models. Happy watering :)

Garden hose T coupler

Standard gardena / garden hose T coupler. The required O-Ring can also be found with my other models. Happy watering :)

Garden Hose coupler/splitter

A splitter for garden hoses. The required O-Ring can also be found with my other models. Happy watering :)

Irrigation pipe T connector

This is for 16mm irrigation pipes. Needs a fair amount of force to fully press the pipe on, might also require a clamp to fix the pipe in place depending on your water pressure. It is also compatible with most common garden hoses, you…

Irrigation pipe to garden hose adapter screw

16 mm irrigation pipe to gardena / garden hose adapter that screws in ¾" threads. Needs a rubber seal that can be found in my other models or bought from your local hardware store. Might need a pipe clamp on the irrigation pipe end…

Gardenhose 3/4" male thread adapter

A male ¾" to ¾" thread adapter for garden hose systems. It is compatible with all my other garden hose models which have a female 3/4 " thread

Gardenhose 1/2" to 3/4" adapter

A simple adapter to adapt a 1/2" thread to a standard 3/4" thread on garden hose systems. Requires a 1/2" and a ¾" rubber seal, which both can be found with my other models. Happy watering :)

Gardenhose 3/4" to 1/2" adapter

A simple adapter to reduce a 3/4" thread to a 1/2" thread on garden hose systems. Requires a 1/2" and a ¾" rubber seal, which both can be found with my other models. Happy watering :)

Gardenhose 3/4" to 1" adapter

A simple adapter to adapt a 3/4" thread to a 1" thread on garden hose systems. Requires a 1" and a ¾" rubber seal, which both can be found with my other models. Happy watering :)

Garden Hose coupler

A X splitter for garden hoses. I did not print this one yet since I have no need for it but had fun in modeling. Feel free to add pictures and print profiles. The required O-Ring can also be found with my other models. Happy watering :)

Garden Hose L coupler

A L coupler for garden hoses, if cou have some tight corners or something. The required O-Ring can also be found with my other models. Happy watering :)

Gardenhose 3/4" female thread adapter

A female ¾" to ¾" thread adapter for garden hose threaded couplers and adapters. It is compatible with all my other garden hose models which have a mal ¾" thread

Irrigation pipe connector

This is for 16mm irrigation pipes. Needs a fair amount of force to fully press the pipe on, might also require a clamp to fix the pipe in place depending on your water pressure. It is also compatible with most common garden hoses, you…

Garden Hose 1" to 3/4" Adapter

A simple adapter to reduce a 1" thread to a ¾" thread on garden hose systems. Requires a 1" and a ¾" rubber seal, which both can be found with my other models. Happy watering :)

Irrigation pipe L connector

This is for 16mm irrigation pipes. Needs a fair amount of force to fully press the pipe on, might also require a clamp to fix the pipe in place depending on your water pressure. It is also compatible with most common garden hoses, you…

Garden hose adapter angled

An angled gardena to ¾ inch pipe thread adapter as it is commonly used in garden hose systems. Could be used for prototyping or alongside my holiday watering system adapter. Print in high quality for a good thread, will still need a bit…

Gardenhose 1" to 3/4" thread fitting

A 1" gardenhose fitting with a ¾" thread for gardenhose systems. Requires a 1" O-Ring and 1" seal, which both can be found with my other models. If your print leaks, you probably need to use the slightly bigger O-Ring. Happy Watering :)

Garden hose device / screw adapter

Gardenhose / gardena to ¾ inch thread, commonly referred to as device adapter or Geräteadapter. Needs an O-Ring that can be found with my other models. Print in high quality for a good thread. The part where you screw this in needs a…

Bookmarks v2

A reworked version of my bookmarks with additional motives. Their thin character does not damage the book or its binding or bend the pages, like other, thicker bookmarks would. Some motives like the triskelion make beatiful shadow images…

Gardenhose Fitting 3/4" with 1" thread

Standard garden hose to 1" thread adapter, as it is used in e.g. sprinkler systems, pumps or water switches. Reqires a ¾" O-Ring and a 1" Seal which can be found with my other models. If the standard O-Rings leak you need to use the…

Gardenhose 1" to 3/4" male thread adapter

A male 1" to ¾" male thread adapter for garden hose systems. Need rubber/TPU seals at the other end (in the female part) which can be found with my other models. Happy watering :)

Gardenhose 1" Fitting

A 1" gardenhose fitting for gardenhose systems. Requires a 1" seal and a 1" O-ring which both can be found with my other models. If your print leaks you need to use the slightly bigger 1" O-Ring. Happy watering :)

Gardenhose 1" device adapter

A 1" device adapter for garden hose systems. Requires a rubber/TPU 1" O-Ring which can be found with my other models. If your particular print leaks you need to use the slightly bigger O-Ring variant. Happy watering :)

Vagina Cookie Cutter

Garden Hose X coupler

Standard gardena / garden hose X coupler. The required O-Ring can also be found with my other models. Happy watering :)

Gardenhose 3/4" to 1" thread device adapter

A ¾" quickrelease to 1" thread device adapter for garden hose systems. Requires a rubber/TPU ¾" O-Ring which can be found with my other models. Happy watering :)

Bayonet Whip / Dragons Tongue

With this project I recycled early prototypes of my bayonet blade from the HEMA musket project. It is modeled after original 1800s british musket bayonets with an enlonguedback portion to reach a Length of 60cm. Print the blade from TPU…

Irrigation Pegs 16mm

Adaption of the original 13mm irrigation pegs from IK3Digital to 16mm pipes. I essentially redrew the shape and remodeled the curve at the top to be the same, just for 16mm as I did not want to just scale the whole thing up and waste…

Garden hose screw endcap

A end cap for ¾ inch pipe threads as they are used in gardena hose pipe systems. The rubber seal can be found in a separate model as a complete seal and O-Ring set. Print in high quality for a good thread, will still need a bit of force…

T-Slot track for Einhell TC-TS 2225 U table saw

I needed T slot tracks for my Einhell TC-TS 2225 U table saw, so I created some. There are two versions, one for screwing on jigs, the other one to replace the track for the miter jig. there is a slot for a M6 nut. In both versions, the…

Gardenhose 1" to 3/4" female thread adapter

A female 1" to ¾" thread adapter for darden hose systems. Requires a 1" and a ¾" rubber/TPU seal which both can be found with my other models. Happy watering :)

Magnetic Fidget Katana

A remodel to fit 6x2mm magnets within the model itself, so there is a pause in the profile (.3mf file, made in BambuStudio) where the magnets are added and printed into the model afterwards. If your slicer does not support the BambuStudio…

Magnetic Fidget Cards

BIG UPDATE added some more designs, roses, triskelions and the witcher 1 wolf and yennefers pendant. The roses and the witcher designs will probably need a .2mm nozzle for a good quality image. Switch the filament on the last 2 or 3…

Garden hose bottle adapter

I made this to add an additive to my irrigation system. The thread fits to a (european) PET bottle. The idea is that a watersoluable fertilizer placed in the PET bottle will be mixed into the waterstream. Matching seals can be found with…

Garden hose X+I coupler

A combination of X and I coupler for garden hoses. I did not print this one yet since I have no need for it but had fun in modeling. Feel free to add pictures and print profiles. The required O-Ring can also be found with my other models.…

Garden Hose Adapter for plant watering system

A cut version of a gardenhose adapter with the srew part. Originally built for the Aldi Süd Urlaubsbewässerungssystem which is basically the same as the Gardena thing which itself basically is a pot with a lid, a pump and several micro…

Paracord BB Funnel

This set of funnels is designed for crafting paracord projects with 3mm metal BBs. There are two different versions. One is to insert directly into the paracord while the second version is made to be used with a 3,75mm straw. Insert the…

Belt Holders

Update: New hook models and improved covertec wheel holders in three different thicknesses! The covertec holders are designed with very little tolerance, you will probably need to trim the edges a bit for a lighter fit. the tightness of…

gardenhose 1" male thread adapter

A male 1" thread adapter for garden hose systems. Requires a 1" rubber/TPU seal at the other end which can also be found with my other models. Happy watering :)

Shoji / Kumiko angle jigs (multiple angles)

A simple angle jig for 15, 22.5, 30, 36, 45, 54 and 67.5 degree angles. I use them to make inserts into 60 and 108 degree corners for my icosaeder and dodecaeder lamps. The other angles are used in Asanoha Kumiko. I printed it with 15%…

Gardenhose 1" coupler

A coupler for 1" gardenhose quickrelease systems. Requires two 1" rubber/TPU O-Rings which can be found with my other models. If your print leaks you probably need the slightly bigger O-Ring. Print Profile has two orientations, if you…

Sanding Cylinders / Schleifzylinder

Update: stronger models in v5! These models contain structures that force the slicer to build more walls at the outer wall side! Also, consider if you want to print the cylinders from PLA, PETG or TPU. PLA is easy to print but prone to…

Gardenhose 1" device adapter with 3/4" thread

A 1" device adapter for gardenhose systems with a standard ¾" thread. Requires a 1" rubber/TPU O-Ring which can be found wioth my other models. If your print leaks you need to use the slightly bigger 1" O-Ring. Happy watering :)

Gardenhose 1" female thread adapter

A female 1" to 1" thread adapter for garden hose systems. It is compatible with all my other models which have a 1" male thread. Requires 1" rubber/TPU seals which can be found with my other models. Happy watering :)

TikTok Magnetic Fidget Sword

Remodel to fit 6x2mm magnets inside of the model. Add pauses for each plate to put the magnets in

Round Sanding Paper Holder

This sandpaper holder was designed for round sandpapers up to max 128mm in diameter. The holders are stackable as can be seen on the pictures. Printed from PLA. Fits on the A1 Mini printbed. There are supports on the bottom that need to…

Plain Infinity Cube

A simple, plain fidget cube with rounded edges :)

Gardenhose 1" to 3/4" coupler

A coupler gardenhose quickrelease systems that connects 1" and ¾" hoses. Requires a1" rubber/TPU O-Ring and a ¾" O-Ring which both can be found with my other models. If your print leaks you probably need the slightly bigger O-Ring. Print…

Gardenhose 1" endcap

An endcap for 1" gardenhose systems. Requires a 1" rubber/TPU seal which can be found with my other models. Happy watering :)

Foot Acupressure with bullets

Yarn spool

A simple spool of thread to spool up loose yarn or thread. This print is quite thin, so make sure to let your buildplate cool down or your print will be deformed! Happy printing and sowing :)

Gardenhose 1/2" endcap

An endcap for 1/2" gardenhose systems. Requires a 1/2" rubber/TPU seal which can be found with my other models. Happy watering :)

Proxxon DB250 tool rest

A simple sparepart of the original handrest and a bigger version of the toolrest for the Proxxon DB250 micro woodtunring machine. There are two variants of the bigger version, one has the same height as the original one, the other is…

The HEMA Musket Project

Do you want to include 1800s Muskets in your HEMA training, but your fencing club does not have any musket reproductions or nylon wasters? With a little woodworking and 3D printing, you could build your own training musket! Part 1: 3D…

The model wind turbine Project

This repository contains all model files that were created for a university project. Our model is based upon the two MKII and MKIII wind turbines made by 3dprintable. Basically, we added an active pitch control that was not present with…

Ruger Superhawk Airsoft Magazine

A revolver magazine for the Ruger Superhawke Softair Revolver. Holds 8 cal. 6mm BBs, print with supports and brim for bed adhesion. Needs very clean trimmed inner edges for a good fit inside the revolver chamber

Casio G-Shock AWG-M100 Nato Adapter

Nato Strap Adapters for the Casio G-Shock AWG-M100. It has a 16mm lug and is made for 22mm wide straps

Lab Beaker Cookie Cutters

Simple cookie cutters shaped like lab glassware. The model file v1 has the original size, which is way to big for normal cookies but might be useful if you want big beakers. Happy printing and baking :) Please keep in mind, that PLA is…

GraviTrax Junior Tower Element

This is a base tower element for the Gravitrax Junior marble run. This is optimised to fit with snuggly like building bricks. This makes the towers more stable. One A1 mini plate can print up to 6 elements. A single element costs ~8g of…

Rectangular Sanding Paper Holder

This sandpaper holder is designed for standard rectangular sanpapers that can be put onto sanding blocks. The max size is 94x236mm. The boxes can be stacked and I like to write the grit onto them. You can also add text/embossing using…

Miter Jig for Einhell TC-TS 2225 U Table Saw

This is a replacement part for my Einhell TC-TS 2225 U table saw. My original angle jig including the T track broke, so I had to re-create both. My goal was to build something that can work as replacement part and as upgrade part.…

Modular Plant Trellis

A simple modular plant trellis that can be stacked or put together with the included angle connectors. Includes 90°, 70°, 60° and 30° connectors. The connector pins are modeled with some margins, if the print do not fit into the connector…

Delta Sanding Paper Holder

This sandpaper holder was designed for delta shaped sandpapers up to max 160x110mm in size. Standard Bosch Professional 150x100mm and Mirca 152x100mm papers and sanding grids. The holders are stackable as can be seen on the pictures.…

Celtic Triskelion Fridge Magnet

A simple celtic triskelion as a fridge magnet. Takes a 6x2mm magnet. Print profile contains a pause to insert the magnet. Make shure to push it down flush

Queer festival camp decorations

Decorate your festival camp with these diverse signs and symbols from various queer subcultures! Print it from glow in the dark filament to have an extra cool decor. Includes a triquetra heart, the inclusive progressive pride flag, a…

LGT lightsaber covertec wheel

This is a simple covertec wheel that threads onto your LGT lightsabre and clips into your existing covertec wheel holder or the lightsabre belt holder you can find with my other models. Needs an M3 screw to attatch the wheel itself to the…

Sortimo/LBoxx Spacer (no AMS)

A spacer for LBoxx cases with hexagon patterns in the lid. Bosch does include spacers made from styrofoam sometimes but this model enables you to customize your Sortimo cases to your needs! The print profile combines PLA and TPU to print…

Hand Blender Wall Holder

This is a wall mount for Bosch hand blenders. Print from PETG for it to be strong enough to withstand kitchen use. If you would print this from PLA, the layer adhesion would cause it to fail. PETG does not have this problem.

Gemstone

I modeled this gemstone for my gwent card game. In gwent, red gemstones are used as as life/rounds-not-lost indicators. This gemstone can be used for any other applications as well. There are two versions, v1 has a different phase angle.…

MKIII Wind Turbine HT DN50 pipe adapter Kit

This is a adapter kit for the MKIII wind turbine by 3dprintable1 ( https://www.thingiverse.com/thing:2851306 ) designed for german HT DN50 pipes. The original kit makes use of standard UK drain pipes with an inner diameter of 64.50mm…

8mm Plug

A simple plug for 8mm holes in water containers, e.g. water pistols. Has little nobs to hold it in place. This was designed for a thin-walled water pistol but probably can be used for other appliances too. Print from TPU

Somfy remote case

A replacement case for the somfy 2-button remote. It is designed to be glued shut and be replaced on battery change. This print is extremely sensitive to exact print dimensions! If an .8mm section is printed as e.g. 1.4mm the casing will…

Soap dish

A simple soap dish. Additional feet in different tolerance variations optional, maybe print from TPU or other rubber-like materials for grip but works without feet aswell

Outside clothes dryer adapter and lid

This is a simple adapter for outside rotary clothes dryer ground sockets with a diameter of 64mm to reduce it down to 51mm. Contains a lid on plate 1 and the adapter itself on plate 2. Print it from PETG for better resistance against the…

Drillpress Heatinsert Adapter For Soldering Iron

Threaded heat inserts, we know and love them. But getting them inserted straight is a difficult. For this, people build various forms of insert press assemblies. I had this drill stand which is currently not in use, so I used this for the…

Keg Garden Hose Adapter

This adapter with 1" thread is made for a specific 1000L keg with these big valves to connect it to a garden hose system. Combine this adapter with a rubber seal from your local hardware store or print one yourself from TPU and other…

BDSM Triskelion Fridge Magnet

The BDSM triskelion as a fridge magnet. Takes a 6x2mm magnet. Print profile contains a pause to insert the magnet. Make shure to push it down flush. The print profile contains two different printing orientations. Choose what you like…

Team Gecko Logo

This is a 3D version with extruded walls of the Team Gecko Logo. Made with a pin in mind

Workshop Vac Adapters

Multiple different vaccum adapters for my workshop tools made from TPU. A generic vaccum adapter, an adapter for my jointer and an adapter for my electic handplane

Geli balkony planter stabiliser

A replacement part that fits the standard Geli balcony planter that stabilises the middle portion of the planter. https://www.bauhaus.info/balkonkaesten/geli-standard-balkonkasten/p/20250991 This stabilising part breaks ofthen or does not…

Eyeliner Holder

I wanted to store my eyeliners in a way so the tip would face down to prevent it from drying up. So I created this eyeliner holder with multiple different hole sizes and tolerances so support different eyeliners and small makeup brushes.…

Monitor arm gooseneck clamp

A Monitor Arm Clamp with a 3/8 Inch fitting for musical goosenecks. I use it to mount a lamp on my monitor arm. Reinforced with M5 Bolts along the fitting. The Bolt to fix the clamp in place is a M8 bolt with a nut, washers and a snap…

Parry guard for Coldsteel training knife

A simple addon for the coldsteel Leatherneck S/F [link] training knife to transform it into an inexpensive parry dagger for rapier fencing. This is intended for use with nylon waster/trainer swords, not for impact with steel! Printed from…

Soil Moisture Sensor

This is a two part project for soil moisture sensors for your garden. Plate 1 has the parts for the housing that holds an ESP8266 [link] , BME 280 temperature and humidity sensor [link] and a receiver for the resistive sensors (included…

Rack pipe endcap

This endcap is made for the Walteco Furniture Foot ( https://www.bauhaus.info/moebelfuesse/walteco-moebelfuss/p/28385949?variantfallback=diff0-diff1 ) used as a holder for things mounted to a wall. The original has a endcap for screwing…

Bokken Tsuba Holder

A simple bokken tsuba holder replacement part. It is modeled with very tight tolerances, I needed to use tools to push it all the way down onto the bokken (which is what you want for a tight grip). I have also included other models with…

Lapel Pins

Pins that were designed to build a provenance graph on a doctor hat for a fellow PhD graduate. Add text to the models in your slicer. The pins use 10mm butterfly pins [link] that are fastened to the back using superglue. The standoffs at…

Graduation Cap Cookie Cutters

Cookie cutters for baking doctoral graduation hat shaped cookies. There are two different shapes and a separate cord to attatch individually. The cord itself is still in a testing phase to determine, if the current slim shape can work.…

Parry Guard for Coldsteel Rondel Dagger 2 Claws

An addon for the coldsteel rondel dagger [link] to transform it into a parry dagger, also called gauche or Parierdolch. There are two versions of tolerance, the one without tolerance marking is ment for TPU, the tolerance marked model is…

Parry Guard for Coldsteel Rondel Dagger 3 Claws

An addon for the coldsteel rondel dagger [link] to transform it into a parry dagger, also called gauche or Parierdolch. There are two versions of tolerance, the one without tolerance marking is ment for TPU, the tolerance marked model is…

Bosch 4A Standard Battery Charger Holder

This holder is designed to hold the Bosch 4A Standard battery charger for eBikes. It features a cutout at the bottom to route the power cable as well as little standoff feet so it can be mounted on top of surface-mounted cables.

Fritz Repeater Lights Cover

The lights on my Fritz Mesh Repeater bothered me, so I created this model to cover up the lights. There are two versions with different tolerances on the locing part. It should be compatible with all Fritz WiFi repeaters of that design,…

Fly screen sliding door top beam adapter

This is an adapter for the top beam of the Aldi fly screen sliding door. I modeled it to stick on the metal beam, it fits into the corner socket. The perfect spare part if you took a wrong measurement as I did back when I built the door.…

Scalpel sheaths

A simple scalpel sheath to cover the blade of your scalpels. There are multiple different sizes to fit many different scalpel models. Happy printing :)

Door Handle

A simple door handle to glue onto a door or something else you want to be able to pull

Tomato Tower Clamp

This clamp was designed for the Bellissa tomato tower [link] to supplement the included metal clamps. In the picture you can see the original metal clamps (hanging loosely) and the printed clamps (all other ones in the picture). This…