Liczymy pasujące modele…
This is a canopy for the BetaFPV Air Tinywhoops, like the Air65 and Air75. The longer tail section allows a lower camera angle to be set. I also made a widening in the area of the right holder to additionally fix the antenna connector. I…
Trap for houseflies that can be screwed as a lid onto jam jars or preserving jars with a diameter of 77.5 mm. The many small holes allow the aroma of the attractant to disperse excellently, so that the trap works much more effectively…
This mount is designed to attach an ESP32-CAM microcontroller to a water meter. Together with the open source firmware "AI-on-the-edge" ( https://github.com/jomjol/AI-on-the-edge-device ) of the user Jomjol it can read the water meter…
This is a drip head for my garden irrigation system, based on the Gardena Micro-Drip hose. I use it to irrigate my tomatoes and chillies with the water from my rain barrel. I have put together a short video of my irrigation system:…
This is a remix of the case from @regularfry . I just added some vents because the ESP32 gets quite warm when running as with the Espresense firmware. Here is the description of @regularfry , which is also true for me: I'm using these…
This mount is designed to attach an ESP32-CAM microcontroller to a gas meter. Together with the open source firmware "AI-on-the-edge" ( https://github.com/jomjol/AI-on-the-edge-device ) of the user Jomjol it can read the gas meter…
This mount is designed to attach an ESP-01 microcontroller to a krom schröder gas meter. It fits into the recess of the gas meter in which magnetic pulses can be read with a reed switch. In my youtube-video ( https://youtu.be/i9hPf0uNzFE…
This is a notebook stand that brings the notebook screen to about 110 mm above the table surface. This puts the notebook screen at the same height as standard 24" displays. The 3D-printed side elements are connected with an M8 threaded…
This mount is designed to attach an ESP32-CAM microcontroller to an electricity meter. Together with the open source firmware "AI-on-the-edge" ( https://github.com/jomjol/AI-on-the-edge-device ) of the user Jomjol it is possible to read…
Printed without supports in ABS. You can of course also use other materials.
Mount to place two Walksnail Avatar HD Kit V2 stock antennas on an Speedybee Master 5 V2 Frame.
Stevenson screen for the temperature sensor of my weather station (BME280 and an additional Thermistor, but works of course also with DHT11/DHT22 or similar sensors). I printed it with white PLA and have no problems after about 12 months,…
The filament box from XrControl has convinced me very much. Check out his video about it. Unfortunately, it is only available in German: https://www.youtube.com/watch?v=6-2agpkSxcs . However, you need two PTFE couplings for it. Since I…
I've always been frustrated by the fact that you can't get the last 10% of the dishwashing liquid out of the bottle without effort. With this model, you can put the bottle upside down in a stable way and use up every last drop.
This card box for 32 standard (60 x 90 mm) Skat or Poker cards.
The stand is designed to click the Miniware TS80P firmly into place. The soldering iron has a permanent place on my desk when it is not in use. In order for me to leave it there even when it's still hot, I've firmly fixed this holder in…
Here is my compact and convenient 3D-printed Slim Wallet, the perfect solution for carrying your essentials on the go! This wallet is designed to fit comfortably in your pocket, so you can carry it with you wherever you go. This wallet…
This is a replacement part for the window hinge cover cap that originally comes from Siegena. I printed it with white PLA.
Introducing the sleek and stylish 3D-printed stand for your 150x150x2.4mm litophane pictures! Perfect for displaying your favorite images and adding a touch of elegance to any room. This stand features a built-in 12-V LED light source,…
This is a replacement carrying handle for a small animal cage. So for example rabbit-, hamster-, guinea pig- or turtle cage. The handle should best be printed upright so that it is as robust as possible in the direction of the load. I…
This housing is intended for outdoor use of the ESP32-Cam microcontroller. There are fixtures for 5mm LEDs. I use infrared LEDs, so the camera can be used in the dark without visible light. But this requires a small modification of the…
This is a simple table stand to mount a 1604 LCD module inside. Feel free to remix my Tinkercad-model: https://www.tinkercad.com/things/bwcsEUMXDvX Category: Electronics
This is a case that a Wemos D1 mini will just fit into. I use it together with the "Funkwecker" firmware , which allows me to remotely turn on/off or reset my PC. For this purpose I lead out thin cables on the side, which are connected to…
This bracket is for mounting an ESP32-Cam microcontroller in a bird nesting box. There are fixtures for 5mm LEDs. I use infrared LEDs, so the camera can be used in the dark without visible light. However, this requires a small…
After the bottom plate of my Crux35 frame from my 3.5” FPV copter broke twice in a row and I no longer had a replacement, I designed a compatible frame for the 3D printer. The dimensions are designed so that the stiffness of the arms…
Bracket for electronic rain gauge, as available at aliexpress, etc. for weather stations (MS-WH-SP-RG). It's designed for a pole diameter of 37.5 mm. Now that I know how the rain gauge works, I would prefer to print the rain gauge myself.…
Bag Clip with a curved top bar for more tension of the closed clip. I recommend using ABS to prevent creeping and a loss of tension over time.
This is an adapter to connect a classic microphone holder with an M8 bolt to the stand of an IKEA tertial lamp. Two M3 screws with a length of at least 18 mm are needed for this.
Customizable window stopper that fills the gap exactly. The Freecad file is attached and can be customized via parameters. The material thickness is deliberately limited so that the window is not damaged if you accidentally try to close…
It is designed for the standard plugs, which have a wrench size of about 9 mm. I did the screwing with Spax 3x12 mm Torx screws.
The tray of my "Dolomite" sink has only a footprint of about 50 x 100 mm. That's why I modeled a small, well-fitted soap holder for it.
Alternative net holder for Ultrasport trampolines that you can use instead of the cap, that comes with the trampoline. It is designed for tubes with an outer diameter of about 25.5 mm. I use it with an 8 mm elastic cord that is fixed with…
Dieses drehbare Schild zeigt "Mobiles Arbeiten" bzw. "Im Büro", damit die Kollegen wissen, wo man gerade arbeitet. Wahlweise kann man die beiden ersten und die beiden letzten Schichten mit einer anderen Filamentfarbe drucken.
Funnel extension for electronic rain gauge, as available at aliexpress, etc. for weather stations (MS-WH-SP-RG). The model has a groove that fits exactly into the edge of the rain gauge. I have filled this joint with silicone, so that the…
Geschenkidee, um nicht einfach nur Geld zu schenken. Im Online-Versand habe ich ein Vorratsglas mit Bambusdeckel mit rund 10 cm Durchmesser und 2,2 l Fassungsvermögen bestellt, das ich mit den benannten Zutaten befüllt habe.…
This is the case of my self-designed window sensor. It is based on an ESP8266 and lasts several years on one battery charge. I designed the board especially to get the deep-sleep under control. In my youtube-video (…
This is a case for the D1-mini based board from Hasenpups, that is designed to connect addressable LEDs/Neopixel strips and handle them with the WLED firmware. You can find the PCB-design on Github here:…
For my 8-bit carnival disguise, I wanted to use this bow tie that user robokid posted here on Thingiverse. To add a little fun factor I spiced it up with an Attiny85 and some LEDs. In my Youtube video I explain how I proceeded in detail:…
In my video linked here I show how to build a transmitter with an ESP8266, like the Wemos D1 mini and a RF module, to control awnings and shutters using the Somfy RTS remote controls. And here is the case I designed for this purpose. It…
This is a stand for SD card readers from Delkin Devices: Delkin USB 3.0 Dual Slot SD UHS-II and CF Memory Card Reader (DDREADER-44). I printed the stand almost upright, so that both the stand's installation area as well as the visible…
The bracket is suitable for the mini PC sold as “Topton pfSense Firewall Soft Router N6000 N5105 N100 4x i226-V 2.5G LAN NVMe Barebone Fanless Mini PC HDMI2.0 DP AES-NI OPNsense” on Aliexpress (as of Nov 2024). It replaces the base plate…
A goal for the simple marble game. https://youtu.be/uT20sJdeaGo
The slide switch of the Bosch IXO (6th gen) sometimes gets stuck and can hardly be moved due to its smooth surface. This handle is an excellent solution to this problem. I printed the handle from ABS and glued it on with superglue. I…
This is a lampshade for the ANSMANN NL-2B socket LED-nightlight. It reduces the brightness in the set direction, but since the back remains bright, it still remains quite bright in the room. I have increased the shading effect by gluing…
This is a booster seat for my Anker smartphone stand. The recess, which should protect the smartphone from falling out, is so deep that considerable parts of the screen content are lost. Since I place the device almost all the time…
To wszystkie aktualnie dostępne wyniki.
