Liczymy pasujące modele…
Similar to the Colliflower Cube only you don’t have to replace your rear fence. Mine reuses the existing back two bolts for the throat plate. It will cut straight on and bevels but you can't rotate the fence for miters otherwise the…
Festool Quick Clamp Pad Replacement This is a replacement pad for the Festool Quick Clamp. The original one has a little flex in the material to bend and clip in place, the filament is more rigid so it will be a tight fit. I would…
DF700 Real bit length 90mm Domino bar space 77.25mm Domino bar thickness 22mm diameter Notes: DF700 Real bit length 90mm 4mm bit length 79.25mm (10.65mm shorter than the rest) Base shim to zero depth 62.00mm For 1/2" plunge, bit needs to…
Fits in the TS75 blade arbor window, button turns to secure. Print slotted screwdriver hole down. Rafts/Brim: No Tree supports: Yes Infill: 20%
This slides into the rail on a Festool MFT to snug up the gap between the rail and the location pin on the front rail support. It has a slight slope on the inside sides that match the angle of the location pin for a wedge fit and can be…
Festool Tracksaw Kerf Wedge I was sawing a long live edge piece of lumber and the kerf closed up on my blade causing slight kickback. I wished I had this when I was doing the cut so I designed this. You just place it in the cut kerf as…
M6 bolt knob low profile for 10" sawblade holder I bought a 10" tablesaw blade holder, it's a popular model, black, square, it has a large start knob and long black bolt that holds the blade. Everyone likes the blade holder but hates the…
Festool Quick Clamp Pad 1.5" Extender This is a replacement extension pad for the Festool Quick Clamp. This will give the pad more height if you want to use it for holding down epoxy pours or reaching over the fence on a Kapex KSC 60. The…
Dust port nozzle for Bosch 1590 and 1591 evs Part# 655 Suction Nozzle BSH-2605730040 This has a 27mm outside diameter hose fit, which fits my rubber Festool hose. I've also included a 30mm file for bosch hoses. I would increase the infill…
Snap in plug for the hole on top of garbage/recycling cans. This is a plug for a 11.5mm hole.
This is a jig you bolt onto a piece of wood for clamping. It lets you place a dowel , I'd say up to 1/2" and rotate it in the V groove against a sander at an angle. The stop prevents it from moving forward so you can get a consistent…
To wszystkie aktualnie dostępne wyniki.
