Liczymy pasujące modele…
This collection regroups the models of handles for nuts and screws i designed over time. All designs can be printed without support, refer to the illustration to identify the different types. Bigger sizes up to M12 are available here:…
Those designs are a set of rings to measure the size of your finger and see what ring size you are most comfortable with. The files are designed and named after the US chart but you can refer to the ring size chart in the illustrations to…
These designs are compact containers to bring toothpicks or cotton buds with you. I was inspired by this model: https://makerworld.com/en/models/525669?from=search#profileId-447641 But it is completely redesigned to make it significantly…
I previously published a collection of handles for nuts and screws i designed over time. (https://www.printables.com/model/359479-handles-for-m3-to-m6-bolts-and-screws) It was quite popular and i was asked a few times to make the models…
This is a collection of knobs i designed for M2.5 to M8 screws. I use them in my designs to adjust screws without needing tools. Those knobs are designed for standard internal hex screws with cylinder head. The head dimensions are…
This design is a remix from hanz_grau's cable clip: https://www.thingiverse.com/thing:4992551 This version is for 2020 profiles (Vslot and normal profiles). Elephant feet's (first layer overextrusion) tend to impede the part from clipping…
Those designs are different types of nozzles and a cork for seal guns. You can chose nozzle sizes between 2 and 5 mm. I like the 2mm for delicate works. All models can be printed without support and need no post treatment. For a smooth…
This design is a tennis ball holder to clip on your belt. It is made in two parts "Tennis ball holder" and "Clip" to make the print easier. The two parts are assembled by 4*M3 screws of 5 or 6mm.only the base of the spherical part require…
This design is a modular wall display for enamel pins. You can freely print and assemble any number of tile to form any shape and use it to display your collection of pins. The different types of hook make it easy to attach to any type of…
This model is the skull of a 3 years old australian shepherd. It is built from a scan realized for veterinary purpose (the dog is alive and well). No bone anomalies where observed on the scan. Model generated from scan with the open…
This model is a remix of the sanding block proposed by micmac2a and Joew1120: https://www.thingiverse.com/thing:4639552 https://www.thingiverse.com/thing:4793489 In this version the printed screw has been modified to support more torque…
This post contains 3 models related with the practice of archery: The first model is a simple clip, used to keep the turns on your string when putting it in a storage. The second one is a replacement for the finger wedge in finger tabs.…
This model is a small holder to glue onto the cover of your notebook to hold a pen. 3 sizes are available, 8, 9.5 and 11 mm depending on the diameter of your pen. Chose a diameter slightly smaller than the pen. You can also chose between…
This design is a two axis printed linear stage capable of a positioning accuracy in the order of 10 micron. Besides 3D printed parts it only uses 2mm metallic rods, two 40mm spring and two 55mm M3 bolt with nut and washer. The complete…
This model is a clip probe for electrical measurements. It uses a piece of copper wire (0.8 to 1.4mm diameter) and a spring (up to 8mm diameter). A pen spring works well. Follow the illustration in the pictures to bend and install the…
These designs are tube holders for 1.5, 2 and 5 ml micro-centrifuge tubes. It is designed to hold individual tubes straight during weighting. I also use it to hold 5ml tubes on a magnetic stirrer. The design objectives where to make it…
This design is an orthogonal printed linear stage capable of a positioning accuracy in the order of 10 micron. Besides 3D printed parts it only uses 2mm metallic rods, a 40mm spring and a 55mm M3 bolt with nut and washer. The complete…
This print is a measurement setup to accurately measure the diameter of an extruded filament using two 22*7mm ball bearings and a dial indicator. Based on the design offered by newcrz ( https://www.thingiverse.com/thing:4835232 ) this…
This design is a printed out of plane rotational stage (i.e goniometric stage) capable of a positioning accuracy in the order of 10 micron. Besides 3D printed parts it uses 8 693ZZ and two MR95-zz ball bearings, one M5 and various M3…
This design is a doorstop. It can be used to keep your door fixed in any position. In particular if you have an animal that you want to let pass while keeping your door ajar this model will perfectly fit your need. It is composed of three…
This is a series of nozzles and plugs to dispense and store your solder paste. The nozzles exists in 3 variants with a nominal diameter of 1.2 1.8 and 2.4 mm diameter. The plug screws on the tip of the solder syringe to keep it from…
This design is a printed linear stage capable of a positioning accuracy in the order of 10 micron. Besides 3D printed parts it only uses 2mm metallic rods, a 40mm spring and a 55mm M3 bolt with nut and washer. The complete fabrication…
This model is a holder for 3ml disposable pipettes. I use it to hold my pipettes when dealing with multiple small vials. The design is meant to ensure that the tip of the pipette is not contaminated by anything, that there is no risk of…
This tool is a squeezer i use to force a viscous fluid through a syringe filter. In the off chance that like me, you need to filter a syrup like fluid through a syringe filter, you will find it much easier to do with this than by hand...…
This design is a printed rotational stage capable of a positioning accuracy in the order of 10 micron. Besides 3D printed parts it uses a 6200 and a MR95-zz ball bearings, two springs and M3 bolts with nuts and hot melt inserts. The…
This design is a system of flexible attach for GT2 Belt. I use it to fix the belt to the heated bed of my printer. It adapts to a M5 screw in the center. I designed a flexible attach because the rigid one i used previously led to…
This design is intended to test the offset between two FDM heads. It also tests the parallelism between the 2 X axes in Zidex type printers. It is designed for 0.4mm large and 0.2 mm high layers. Different settings may result in incorrect…
This design is a series of corks for wine bottles or other glass bottles with various miniatures of antique art serving as a handle. The miniatures are based on real artworks digitalized by photogrammetry. The corks are available in 3…
This model is a stringer used to bend a bow. Is is designed to be printed in TPU and hold tightly the branches of your bow without risks of damage. This design is inspired from the leather stringers you can find on the market. To make it…
This model is designed as a join to protect cables passing trough a hole. It is customizable and should accommodate any cable and hole diameter. The join is printed as an arc and closes to form a full circle when inserted. The open-scad…
This design is a pellet dispenser using an endless screw powered with a Nema 23 stepper motor. I use it to slowly feed pellets. All parts print easily without support except the endless screw witch also requires PLA tough, ABS other high…
This model is a type of micropipette based on single use Pasteur pipettes. I use it to drop small, controlled amounts of silver ink on electronic samples. You can use the control screws to handle repeatable amounts of liquid or use the…
This design is a spool holder conceived to be compact, low friction, accommodate all types of spool and easy to attach to any aluminum profile. It uses 3 bearings 624 (4mm bore, 13mm outside diameter and 5 mm width) and attaches to…
I recently published a modular holder system working as a very versatile 3rd hand for any delicate task you may encounter: Video , 3D files Here you will find the files for the various versions of clips I designed using clothespin…
This design is a holder arm for the "Filawarmer" from The Virtual Foundry. I use it with my spool holder system ( https://www.thingiverse.com/thing:5253211 ). This arm attaches to an aluminum 20*20 profile to hold the heater in a fixed…
This object is a protective layer for a microscope objective. It is useful if your sample is boiling, jumping or may explode ^^. I use it for adhesion tests where a membrane in put under pressure until is no longer adhere or explode...…
This page gather all the models required to build a 4 probe resistance measurement station. For more details on the use and building process, please refer to the instructable here:…
This is the second batch of a series of corks for wine bottles or other glass bottles with various miniatures of antique art serving as a handle. the first 4 can be found here:…
This design is a box to securely send glass slide samples by post. It uses foam to insure the samples are well maintained and 6*M3 bolts to close the lid. There is a clearance of 6mm that i use to put about 6mm of foam on the bottom and…
These designs are a series of chucks for KW spin coaters. Three of them are adapted for silicon fragments of different sizes. They use O-rings of different sizes. The size is indicated in the file name with the first dimension being the…
This is a vibrating plate. I designed it as an alternative for ultrasound bath as i have been working with samples that require mechanical agitation but cannot resist the formation of cavitation bubbles and would break if exposed to…
This is a plier designed to maintain and fold paper pieces precisely. I have recently discovered the papermaker website ( https://papercraft-maker.com/ ) and the possibility it offers to turn any 3D model into a folded paper assembly. I…
This model is a reinforcement for the Ausdom AH861 headset. It is most efficient before the headset breaks completely but can be used with some glue even if the plastic is completely cracked. Each pair of support is maintained by 4 M3*8mm…
To wszystkie aktualnie dostępne wyniki.
