Liczymy pasujące modele…
Remix of Multiboard Snap by Keep Making Parts needed M3 Nut on the backside of the snap for mounting objects using M3 screw. M3 x 12mm screw fits a quite flat object. Credits to Jonathan ( KeepMaking ) for creating multiboard .
Prusa Nozzle holder for Multiboard. I used it with a Weight-Bearing Snap to organize my nozzles on the outside of the Prusa Enclosure. I printed with Prusament PETG, using 0,2mm layerheight and added support under the Multiboard peg on…
See https://multiboard.io for the main parts needed to build the wall mounting system. This bracket uses Multiboard Weight Bearing Snaps to mount into Multiboard Tiles. Even if they are called weight bearing, it didn't hold nearly as much…
Minimal bracket to hold a InfraRed Thermometer from Biltema. Slide it in backside first and rotate it into the position shown in the picture. Mounting 1 M3 Nut 1 M3 Screw 1 Drop-In Nut Weight Bearing Snap M3 (see Drop-In Nut - Weight…
My bike couldn't fit a SmartTag 2 device, because the frame blocked the signal, so I had to make a box to hide it on the outside of the frame. I figured the backside of the rear reflector could be a great place to hide it, by making it…
For the MultiBoard system. This is a medium press fit holder for a glue bottle (Magigoo) or large glue stick. I printed with paint-on supports under the clips of the label holder. Label is printed with two colors on an MK4 without MMU,…
A bracket to hold the original Beta Wrench set on a Multiboard wall. Uses custom bolts with small threads to mount in Multiboard peg holes. They have length of 17.5mm and shank length of 11mm. Print with 3 perimeters with 0.2mm layer…
The extension wand has become looser over the years, so I made an adapter between the extension wand and the handle to make a tighter fit. Printed with ABS 3 perimeters, 50% infill, 10mm brim width and support everywhere
A friend wanted a special fit of an AirTag bracket for a Specialized Turbo Tero X 5.0 bike . It mounts on the bottom part of the frame using the bottle holder screws. Printed in ABS flat with support and 10mm brim. Requires a bit of…
Print in the orientation of the 3MF file, or the small pegs will snap. I printed in PETG and used support, which was a bit hard to remove. Print a Multipoint to hook it onto a Multiboard wall.
Handles for two common sizes of Broom and Bush sets in Norway and a clip to hold them together. I printed them in PETG with support and brim because of rounded edges. A bit of filing was needed to remove support and brim and get smooth…
The Aqara T1 (model TH-S02D) needed a Multiboard bracket to put it on the wall, so I made a bracket that requires a Multipoint to be mounted on the backside. Printing instructions: 3 perimeters 0.2mm layer height 0.4mm nozzle PLA or PETG
Brackets that slide onto Multipoint connectors and wraps around an Smlight Zigbee Adapter . The brackets should slide in from each side on the device to avoid braking.
See the original model for instructions how to print and mount: Transport handle for Original Prusa Enclosure by Prusa Research | Download free STL model | Printables.com
To get the lab power supply out of the way when not in use, I needed a box to cover it up in a dusty environment at the workshop. This model was designed specifically for the Velleman LABPS3003SM power supply , but it actually got a bit…
The original grinder shields were broken, so I made a replacement. I tried printing new shields in transparent PETG, but I couldn't get them clear enough, so I bought a clear acrylic plate 4mm and printed frames in black ABS instead. I…
Inner frame to mount the clock dial after braking almost all the original studs. I found some information about the clock here: SAKWiki | Victorinox Swiss Army Dealers' Wall Clock A neighbor of mine has one of those, and after falling…
The dimensions of this bike and wire are: Bike frame diameter: 32mm Wire diameter: 5mm Bolt hole: 4,6mm The Fusion file has parameters that can be modified, but the clip will probably not fit any dimensions. Printing instructions ABS,…
Custom brackets for a custom four legs stand for Gardena cable protection box. The stand is make out of wooden poles, and it's probably hardly usable unless you also make the same kind of stand.
Print with 3 perimeters laying on the side with support. If printed laying flat on the back, the pegs will snap.
To wszystkie aktualnie dostępne wyniki.
