Liczymy pasujące modele…
functionality should be the same as the original parts: https://sciconsports.com/au_en/kit-thru-axle-end-caps-aerocomfort-3-0-bike-bag-scicon-tp120010528 My Scicon aerocomfort 3.0 didn't come with these end caps. So I tried to design my…
Design inspired by original Tailfin light mount and using the same 2 screws to mount. So you may reference the original installation manual. Reinforced the structure and straightened the mount for extra durability. Adding the second mount…
There are two limitation for the built-in OsmoAudio: 1) it sometime forgot the transmitter and need to do the pairing process in setting menu, it waste time. 2) it can only connect to one transmitter on DJI action 4. So we need a case to…
No additional hardware is needed to install this mod (except the brush). Compliance design enhanced the longevity of the nozzle life. this is the hotend I am using, u may need to modify the brush location for other hotend:…
I designed this mount for use of my portable monitor I bought from here: https://www.taobao.com/list/item/wap/594766167530.htm The monitor is 12.5" with 2K resolution. the mount has been verified to be used on both M1 MacBook Air and…
I originally designed the BLUE one as I have installed the hand-screw wheel on the X plate. Then, I made the Red one for normal ender 3 pro, but its compliance may be limited by the hand-screw wheel No additional hardware is needed to…
I tried to print several tape measure models from printables, but I could not print them right. So I designed mine, with a print-in-place design, although you will still need support for the axle. my tape measure is 15mm wide and 150mm…
This is a box specifically designed for RideNow 700C TPU gravel inner tube. I have also designed another version for road TPU inner tubes https://www.printables.com/model/339708-double-road-tpu-inner-tube-protection-box 20240202: Adding…
This ADXL clamp mount is designed to fit heat bed <10mm thick, and there is a slot for easy clamping on nozzle too. You will need M3 screw to install the ADXL board to this clamp.
This is my 3rd project of GoPro case insert. The first one can be found here: https://www.printables.com/model/602754-organizer-insert-for-gopro-case-and-charging-insid The second one can be found here:…
The magnet of the charing port is too weak. The mic mini transmitter can be knock off even using the original charging cable. so I have to make a case to keep them together while charing. There is a window o the left side so you can see…
For the power adaptor comes with my MacBook Pro 14" M3 pro.
This is my second project of GoPro case insert. The first one can be found here: https://www.printables.com/model/602754-organizer-insert-for-gopro-case-and-charging-insid I design this new one so I can keep my new insta360 X4 and its…
This magnet mod secures your toolhead firmly in the dock for reliable, repeatable tool changes — no shifting, no misalignment. The magnets are integrated into the back of the dock ( back.stl ), adding minimal print time and material. On…
20230709 EDIT: I have been using the same design without issue for 3000 more kilometres now. no structure change for new design, but I have add my YouTube channel name on the inner side of this version. 20230327 EDIT: After 1000km of…
A Holder that fits in 2 16g CO2 (with screw to hold) plus 2 tyre levers with matching length. So you can utilize the limited space in your toolbox/bag. With this kit you can use bring 2 CO2 for use with the double tpu box:…
This is a box specifically designed for storing TWO RideNow 700C TPU road 45mm-valve inner tube. 2024-01-30: adding 65mm-valve version since I got a new wheelset I have also designed another version for gravel TPU inner tubes…
I tried to print several tape measure models from printables, but I could not print them right. So I designed mine, with a print-in-place design, although you will still need support for the axle. It may not have the fastest rewind speed,…
This box stores the complete DJI Mic Mini kit—two transmitters, two receivers, and all accessories—in one compact case. You can also order complete box from my shop:…
Big thanks to Martin for this design. it solve my issue of filament jam due to the small hook at the end of each roll of filament. This model is for ppl with ender endstop switch and M10 bowden thread. it requires below hardware to…
Build of material: 12mmx12mmx3mm N52 magnet Pause on layer 70, insert the magnet then resume. (please see my ocraslicer 3mf file)
2023/02/21: I have move to gravel riding, and improved this design for more demanding environment. Decided to use rubber band from Ravemen TR300 instead of building a Garmin mount on it. I like the Ravemen TR300 because it provide 58…
I lost the waterproof cover of my DRIFT Ghost XL Pro. So I design this one with hand screw, so no coin is needed for installation. there are two versions, one with matching chamfer with body, one without so u can install orange on it.…
I improve the original design to use without the neoprene bag for my new Wolftooth 8-Bit Pack Pliers. This organizer has combined 12 items plus a multitool with 17 functions in one piece, including: 1x Wolftooth 8-Bit Pack Pliers (17…
print orientation as file. no support needed.
Just one of the ways to mount a reflector on your bike
I print it in TPU for extra protection, but it should works in other materials. It can hold: Dual Battery Charger + 2 Enduro Batteries (charging port is accessible) Max Lens Mod 2.0 USB passthur door a yubikey a microsd to sd card adaptor…
Summer is getting hotter and hotter everywhere. we start to face mosquito issue when temperature is above 17 degree Celsius. So I always need to carry my Flextail Gear Max Repel (a mosquito repeller) all the time when I am at outdoor.…
Cable can be run inside the extrusion back-facing side. Camera angle can be adjusted. I print it in ASA-CF because the nevermore will blow hot air to it. The camera is secured by m2 screws. Please print with support touching plate BOM: 2…
I made this mini rack will be mounted under my desk for easy access to my high-speed intranet. It is mounted under my desk with 3 wood screws. I have reserved a screw mount at the back, so it is possible to design a stand-alone version.…
Cheap as only one end stop is needed; Simple to print as it is print-in-place. Stackable so you can use it on your multi-toolhead machines It can detect both filament jam and/or break using one endstop switch. 20240822: ver. 2 with more…
I mount this box under the umbilical plate designed by N3MI. I am using double-side tape to mound this box. Please print it with flat side touch plate. It is outside the machine, so material of choice is not demanding. But I have printed…
I designed this insert to hold one gopro, one 2AH power bank, a Telesin battery case and a bow for some accessories. This is the battery case that will fit in: https://a.co/d/eBN0KX8 This is the power bank I use:
A pair of insert for use with SKS RACEBLADE PRO XL mudguard/fender so it can mount on bike fork/frame with flat surface. I printed it in 95A TPU, 3 walls, 15% infill, no support. the curve and two top square fit perfectly into race blade…
I design these two straps holder to replace the rubberband strap holder that comes with the bags. I use the single holder for the handlebar bag and the double for my medium-sized frame bag. the double version provides an extra hole to…
This is a refined version of a plastic 8mm hex to 12mm hex adaptor that comes with Tailfin Universal Derailleur Hanger (UDH) Adaptor (…
Clip mount for Magene H803 optical heart rate sensor, so it can be mounted on a sleeve, a bib-short strap or an arm warmer directly. I designed this clip mount so I can keep using this 45hrs heart rate sensor for endurance rides without…
When using the Ulanzi Falcam GoPro Mount to DJI Action Mount https://www.ulanzi.com/products/falcam-gopro-mount-to-dji-action-mount-magnetic-base-3234 and TELESIN Magnetic Two-claw mount…
To wszystkie aktualnie dostępne wyniki.
