P
Printableschonsworth
2040 Extrusion M5 mount/bracket
I printed mine with PETG, 5 perims and 4 top/bottom layers at 0.24 height. Uses M5 screws.
- Pobrania
- 158
- Polubienia
- 18
- Ocena
- 0
Wszystkie modele
Liczymy pasujące modele…
P
Printableschonsworth
1U horizontal server mount
Designed to print easily without supports (print on it's side) Use standard drywall screws to attach to a solid backing Use at least 3 permiters I used 13% gyroid infill and everything seems solid
- Pobrania
- 145
- Polubienia
- 30
- Ocena
- 5
P
Printableschonsworth
Amscope / Eakins Microscope VESA/monitor Mount
Wanted to clear up desk space and mount the scope to a monitor arm instead. You'll need to find a bolt that fits the back of the scope mount that's moved over to this vesa mount. I suggest you use a pick to pull aside the clamping spring…
- Pobrania
- 128
- Polubienia
- 19
- Ocena
- 4
P
Printableschonsworth
DIN Rail Mount Storage Bin: "DINBIN"
I use DIN rails to mount SMD storage reels to. However I still have little odds and ends that I want to keep there that don't go well in the storage reels or don't deserve their own. Should print quickly with no supports. Make sure you…
- Pobrania
- 64
- Polubienia
- 15
- Ocena
- 5
P
Printableschonsworth
Magnetic Neptune Apex Fusion A3 Probe Holder
Settings: 0.2 layer height 3 or 4 walls Infill > 10% PETG is best for aquarium use Make sure you rotate the retainer clip on it's side Materials: (8) 10x10x10 N35 (Neodidlium) magnets (they're more like 9.5mm apparently) OR: (4) 20x10x10…
- Pobrania
- 59
- Polubienia
- 4
- Ocena
- 0
P
Printableschonsworth
Concrete Edging Trowel 0.25" Radius
Incorporated feedback from other designs here. Will have to glue handle to top or drill your own screws. It's a 0.25" radius. 1.8" wide, 4" long. Edger side is about 1" deep. Leading edges on both sides are 1/8" chamfer. How I Designed…
- Pobrania
- 40
- Polubienia
- 7
- Ocena
- 0
P
Printableschonsworth
15 Watt UV Sterilizer Aqua Ultraviolet Underside Mount
I designed this to hang my 15 watt UV sterilizer from the underside of the top of my custom, aquarium stand in the sump compartment. The sterilizer should fit snug into the semi-circular section and then use zip ties to fasten the…
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 0
P
Printableschonsworth
Phrozen Mighty Buildplate - extra zero range
The adjustment slots in the stock Phrozen Mighty 8K (and others?) build plates isn't long enough to allow for the build plate zero wizard to work properly since the hall sensor won't pick up the metal tab. This is a fix with a very broad…
- Pobrania
- 16
- Polubienia
- 3
- Ocena
- 0
P
Printableschonsworth
Wanhao i3 Boroscope Holder
Designed an adjustable holder for my cheapo boroscope camera for octoprint from AliExpress. Just back out one of the screws holding the fan/shroud on the front and put it back in through the bracket as shown. Make sure you have slack for…
- Pobrania
- 15
- Polubienia
- 2
- Ocena
- 0
P
Printableschonsworth
Marineland Aquarium Light Holder
Simple fix for my Marineland lid on my aquarium. The lights will fall off if you open the lid too far - drives me crazy! So I made this little clip that rotates. Simply screw in with a short woodscrew (don't strip the hole out!) Print…
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.