Liczymy pasujące modele…
I could not find a model suitable for designspark mechanical. So here is both v slot and t slot created in designspark from drawings online and measurements from t slot directly. each piece is 10mm long if you need to scale it. Not sure…
This holds the poppet valve open, seals and allows the hose to be flushed, I needed 2 (of each)for my keg transfer lines with an inlet or outlet both ends. The black version is 15.5mm diameter body and the white is 16mm. Print Settings…
Firstly, feel free to advise or comment, this is my first XY build and first corexy. I bought a small plasma cutter (<8mm cut) last year and have found it quite useful, made myself stencils to cut things like stepper motor mounts etc but…
Working on a module and it needs to be able to be aimed at something so I came up with this for the moment. I wanted access to the wiring so a case is not ideal, designed for push fit balsa wood, 3/8 or 9.6mm, so I made the square peg…
This is the buffer that the arm on the boot/trunk hits to stop it opening too far, if it cracks (which it will) then ultimately it tries to bend the gas struts. Photo shows a broken one and the print. This is for the RHS looking at the…
Bought a 500W spindle motor and figured the old 3018 needed significant mods to use it. The supplied motor clamp needs a solid mount to clamp the motor so I bought a length of 101.6mm x 12.6mm aluminium. An 89mm section of that forms my…
More to be added, display clips into a holder (surround.stl) which offers some protection and insulation by itself, the slide can then slide into either the close_slide which completely encapsulates the device or one with full access to…
edit 2019: added a version with 6mm mounting holes for countersunk screws. this stl was created using designspark mechanical v4 instead of v2 so hopefully the non manifold issue from previously is fixed, I had no issues slicing with cura…
I was given a Milwaukee M18 CID impact screwdriver that was left out of an auction tool sale, no battery or charger but I did have a large quantity of Aldi 18v packs, just needed a permanently attached adapter. Also needs a 470K resistor…
This fits to standard (purchased online, banggood) 10x10mm internal cable chain (Mine says Jin AO 10.10 on the side) Also provides a cable strain relief to stop any flex at the connector. It is 14mm to the outer edges and holds the chain…
Simple parametric design to hold wire to wind a toroid easily. The end cutouts are inset the same as the width, so the default version is 30mm long and 5mm wide (for a 6mm toroid hole) so wire held for one complete wrap is 2 (L-(W 2)) =…
Found its a bit tricky to touch the tiny pads on the TTP229 without mashing adjacent ones so knocked up this little overlay to help. Might make some different ones yet. Added the rsdoc for designspark mechanical if you want to edit it,…
edit 18 mar added jack_stand, a simple stand that clips into holes underneath and raises the tracks off the ground for debugging motor code without taking off. added photo with track_top fitted edit 10 mar added track_top, plate over tops…
Remixed it as it needed a further offset or the keyhole did not go all the way through the outer with a smaller diameter. Not built one as I ended up turning one up on the wood lathe in 10 minutes when I saw it was an 8 hour print :)…
This is to stop the 8mm bolt head spinning in the T slot of the work surface if you bought a version with the clamps. 7.4mm hole and 14mm across flats (nut_holder.stl) Makes it a lot easier to use the wing nuts. Added a 6mm version upon…
Just a small case for PL2303 based usb dongles with either straight or bent header pins. Small hole allows LED visibility. glues together. Category: Electronics
Not found an 18650 sled that suits my needs. These are all 20mm wide x 80.55mm long. Designed for unprotected cells, it is not far off fitting a protected, you could probably print 2-3% larger and it would fit them without upsetting the…
Printed mine 100% infill in PETG, looking good so far and the bike feels smoother even, I think mine has had metal on metal for a while. Onshape link if it needs modification. Photo has whats left of the old one in foreground, new slipper…
If you wear thick specs like mine and want to stop marking your psvr lenses with your glasses then print 2, these are blu-tacked or double sided taped onto either side of the lens and stop specs from contacting the lens. Also holds your…
My first design made for resin printing, the 1.5mm diameter pins will be a problem on a FDM printer. This was an experiment in designing for resin printing, learnt a lot. Hence the mssing side pieces and holes to allow drainage. I printed…
Wanted a small holder for the AMG8833 without opening up the M5stack so this one just holds onto the rear of the M5 with 4 magnets that hold onto the ones in the original battery case. Nothing fancy, I just wanted to protect the somewhat…
I believe it will also work fine on an Ipad 2 but not tested. Held on with 4 small magnets, self adjusting, takes a reasonable knock or simply slides off. Makes a HUGE difference in audio. Prints flat in 2 parts with no support needed,…
Simple replacement for the perspex Mana SE base plate since mine cracked. The same physical size but integrated the bottom spacers into the print and added a 10mm extension with new bolt holes on the cable side for cable management…
Milled an old pentium heatsink to cool my Pi and was concerned it might short something out so made this little guard to provide a more stable platform around the CPU, assorted holes around it to clear the tiny surface mount components…
If you have an old PS3 eye camera floating around unused and unusable on a PS4, a Raspberry Pi and a solidoodle then this is the one for you. I needed a camera since moving the printer away and this works well thanks to the awesome work…
Created for reddit Support is a little tricky to remove since the 2 cross pieces are angled and end up being steps, might redo it with flat bottom. spins ok though. Perhaps printing with a lower layer height might be better (I used 0.3mm)…
I did not design this, wild bill from benbox laser forums has full credit for this one.. I have not made this either, I have the newer machine with the aluminium mount, scad file included if you need to make changes. Category: Machine Tools
Holds tennis ball for attaching to a iphone 4 currently, 9.5mm gap. attached rsdoc file for designspark mechanical if chanegs required. it was a 5 minute design just to see what the dogs thought. they like it. Category: Camera
To wszystkie aktualnie dostępne wyniki.
