Liczymy pasujące modele…
UPDATE I added a custom printable bearing. It has a 0.2mm tolerance so your printer needs to manage that in order to use it. The inside is serrated to better grip the roller. Outer tolerance is pretty much zero so it will be tight to…
Important Note! It seems Creality has used multiple sizes of fans and different versions of the print head cover. Before installing this cover you should measure the size of your fans. This model is only usable on the cover/fans with hole…
Simple Enderman figure usings the Mini13 joints by soozafone. Print with same settings as other Mini 13 parts. You need one “frame head” part from the original. Number of parts required are included in the file name. All parts in black…
It's a pretty tight fit so should stay in place by friction alone. Depending on your printer and print settings you might need to scale it slightly. I recommend ASA/PETG but a PLA one I made has held up for quite some time too. The images…
Simple lightsaber style of sword I designed for my kids so they can make their dummies jedis. Has two parts that are glued together and a flat design for easy printing. The hilt has a gap of 0,2mm to the blade. If using clamps for gluing…
I had some old ATX motherboard with CPU and memory laying around that were not quite powerful enough for a desktop anymore. I didn't want to throw them away so I turned them into a NAS that I can place in my small rack cabinet. This is a…
This is just a very simple traditional style ice fishing rod. The design aims to be easily printable and not use too much additional hardware. It is made of multiple parts to avoid needing any supports. This also makes it easy to use…
This wall mount prevents your toothbrushes from falling, keeps then shielded from any dirt and when using strong magnets is perfect for use in a caravan, boat etc. The design aims to be light, low profile and easily printable. Most…
I needed a dupont wire organizer with proper wall mounts. I also need the wires easily taken off the wall and sometimes I need to take them with me. None of the models I found met the requirements so I designed my own. This design has the…
A holder for 10 mini files for the Skadis board. I made some small ramps so the files don't drop as my board is not mounted to a wall and may sway a bit. Requires 2-4 universal hooks although 2 is most certainly enough. Printed in black…
Replacement for the brackets of the older style of JYSK roller blinds. To get sturdy parts print with 6 walls and 20-30% infill and at least PETG. Prints without supports as there is only a small bridge.
This steering wheel should fit most strollers. Mine had front guard of around 30mm but you can use different length screws for different sizes. You need to print 2 steering wheel pieces and glue them together using guide pins. The holes…
My Arc pitchers plastic lid broke so I made a replacement part instead of throwing the whole thing away. The main body should be printable with bridging but use supports if you are unsure. I printed in PETG with 3 walls and 20% crosshatch…
Dice to use with balance tetris https://www.printables.com/model/335938-balance-tetris Inserts beveled for easier printing. Empty side for skipping a turn either with or without text. Print solid with any material.
Holds one Loctite super glue bottle and possibly others of same size. Printed in black ASA but most materials are fine. No supports required. Requires two universal hooks. https://www.printables.com/model/323748-skadis-universal-hook
A very simple wall mount for flat handled hairbrush. Print the wall mount if you plan on using screws to mount it. Otherwise just print the base and attach with double sided tape. If you use the wall mount you might need to clean off any…
This wall holder stores a couple of standard size magazines conveniently. There is also a smaller version for shopping lists and smaller magazines. There are small dove tail connections on the sides for mounting different kind of holders.…
The print is all walls and bottoms so infill and other settings doesn't matter that much. You can go for the highest layer height you can to speed up printing. Works with any material, but I printed in PETG. I don't find the organizer to…
Collar to hold weights on straight bar around 25mm (1 inch). Has a very tight grip when used with TPU friction piece. I recommend PETG for other parts. You also need one M4 nut and a M4 bolt of at least 20mm long. The nut is friction fit…
Very simplistic handheld “console” I made for my kids. You can find an example game here: https://github.com/elyvilon/FoP2/ Printing instructions I recommend PETG or stronger but you probably can use PLA too. Using 0.2mm layer height…
Supports not required. You need 2-3 universal hooks to mount it on the board. I made mine from black ASA.
I used PETG but others should be fine too. Print with your regular settings. No supports are required. One universal hook is required to mount. https://www.printables.com/model/323748-skadis-universal-hook
I needed to add a light to my smaller inspection mirror as the one with lights is too big for many places. It is a compromise between light weight and still sturdy enough and easily assembled. The mirror should be of 31mm diameter but the…
These adapters are for the Zenismart type roller motors sold in places like Aliexpress. They are designed for Jysk blinds but might fit others as well. My blinds are a bit older and newer ones might be different. I printed in ABS with 6…
You can plug this little box right in the back usb/3,5mm ports of your JBL Partybox to turn it into ESP32 controlled speaker with HomeAssistant/MusicAssistant integration. I made it for the Stage 320 that I have. Might or might not fit…
I printed with 4 walls which should be more than enough. Infill doesn't matter that much. No supports are required. Obviously you want a UV-resistant filament if using it outdoors. I used PETG that's what I had and it has held up so far.…
To wszystkie aktualnie dostępne wyniki.
