Liczymy pasujące modele…
Pastamatic Filament Spool Winder Modifications Changelog: 2024-02-23 Added options for huge spools and small spool with spacers. Thanks to Ch3vr0n for the idea and testing of the spool spacers Modifications to GekoPrime's winder to better…
***Important update*** I uploaded the wrong file so please redownload if you grabbed files before 2024-03-04 There were a couple things I didn't like about the original design. I found the walls of the gland threads had unusably thin…
I liked the original design by airbiscuity but the fitment was far too tight. I loosened the fit so the magazine will slide in and out easily but not fall during running. Secondly I changed the loops to be a belt clip that can be mounted…
This is a quick and dirty stand for people who don't have the 1" shelf upright to attach the claws of the "Airbrush Holder for Paasche Siphon Feed Airbrush". This stand can sit on the table beside you and have the claws attached without…
I misplaced the rails to mount HDDs into the trays of my server housed in the rosewill RSV-L4500, so I designed these and they fit perfectly. The spacing is standard so there is a good chance they'd fit in other trays. Category: Electronics
This end-cap replaces the stock buffertube end-cap when medium sized batteries are used with the ARP. The stock end-cap doesn't allow medium sized batteries to fit entirely inside the buffertube without wires sticking out and this one…
This piece allows an O-Light PL-PRO Valkyrie flashlight to fit into a surefire x300 specific omnivore holster. The omnivore will need some modification to the rails to fit in, but will then engage the snap as the x300 would. Print in…
I am not a fan of screwing directly into plastic, so I did a quick modification to use a captive hex nut for the stationary bearing, and heat inserts for the lid screws.
These pieces are designed to be used with my individual-spool drybox inserts. The outer fitment is a panel mounted push-fit holder for 6mm outer diameter tubing, and the inside fitment is a funnel guide for filament being pulled from…
Need to move your spool of filament into a dry-box while still using the Universal Auto-Rewind Spool Holder? This set of files will let you do so. This set of modifications and new custom parts moves VincentGroenhuis' rewinder into a…
This is the generic version of the HDD enclosure design I made to work specifically for the CFI-BXX53PM backplane. The HDD handles that fit into this enclosure can be found here See my specific version, which has fan cooling options here…
This is for fine tuning the elephant foot setting for profiles in Prusa Slicer. The squares are labelled with the elephant foot value being used for it. This helps with setting the right values in the slicer and for keeping track for the…
The basic design by 3dGringo looked good and several people requested design files, so I quickly did a reverse engineer of the part so that others can make spinoffs. Some cool ideas included adding charging USB ports and additional plugs.…
This enclosure was designed specifically for use with the CFI-BXX53PM sata multiplier, but has the standard spacing for backplanes. My design uses these handles I designed. For a generic 5 drive enclosure see the alternate version here…
This lotus-flower-inspired star-like design drawn by Neiot was made into a 3D object as a hanging ornament by me. For best results print in contrasting colors, either each body separately or at the same time with a multi material printer.…
I took mgg942's piece and did a quick plane cut along the bottom to give a proper face for the piece to stick to the build plate with. Category: Scans & Replicas
I bought some bare sockets to hold and power my UV heater lamps but the wires came out of the bottom so mounting directly perpendicular to the wall would have been tricky. To solve this I made a small shell for the socket so that it can…
This cover was designed to replace the battery section of a Schlage Camelot Deadbolt. It isn't a perfect match, but close enough to not stand out terribly. Category: Replacement Parts
The O-light PL-PRO Valkyrie attachment to the M17 was a bit too far forward and thus out of easy reach while using the gun. This simple part lets the flashlight clamp in a position closer to the trigger guard. Category: Sport & Outdoors
This is to attach the lenses of the Fancii magnification visor to the frame of the iKKEGOL loupe . I didn't like the mount of the Fancii magnification visor but the lenses are very good. Similarly the loupe glasses are comfortable but I…
I melted the factory supplied handle on my deep fryer, so I designed a replacement. It takes the M3 bolts and hex nuts that usually come with the Prusa i3 Mk3 kit. They are M3x10 socket head bolt and hexagonal M3 nuts UPDATE: added…
NOTE: As this doesn't have the holes and one way valve to expel carbon dioxide when breathing out it is not safe to use, so, uhh, nothing to see here, carry on. This is a replacement part to fit the Respironics WISP Nasal Mask onto a…
Inserted rim downwards this part prevents the collapse of the opening of a soft water bottle holder, which is repurposed for use as a magazine drop pouch. This guarantees the position of the opening for me to do muscle-memory blind…
Need to keep your spools dry and clean, but the folding lid of the mmu compatible printer enclosure drops your dry-box to the ground? This slide-down box-holder keeps the dry-box in place during lid-lifting maintenance. This holder was…
This piece clips into the screw holes of a 3.5" HDD in order to have something with which to remove hard drives from recesses. In order to be as low profile as possible it is loose enough to rotate about the screw hole axis with the…
For a full description and instructions please see https://github.com/Blargedy/The_Filament_Butler
My bathtub has a little plunger that toggles between water coming out of the faucet or the shower head. The knob at the end of the plunger broke off and left the threads inside the plunger. I could have drilled it out or something else…
I decided to use a Crosman Voodoo shotgun for indoor airsoft, but I wanted a tracer unit to attach. I therefore made this adapter that push fits over the orange end cap, inside the outer barrel and over the inner barrel. The fitment is…
I copied bipsen's design and modified it to be easier to print, and fit the specific pneumatic fittings I have. Category: 3D Printer Accessories
This is an adapter plate to mount a buttkicker LFE to the armrest strut of most gaming chairs. In order to use this adapter, you must open the fusion360 file, and edit Sketch4 under the top level object. The location of sketch 4 is shown…
These handles are to fit any tool or utensil as long as the tang is sort of close to the size of the hole. If you have something quite off and want me to edit the size of the hole, just comment and I'll get that done. For best results,…
This replacement piece adds cable bundle attach points where they were on the EInsy board enclosure, which are needed when you move the EInsy board out of the enclosure. For use in heated enclosures print this in PC or ABS if you must,…
Kelacao is a fantasy/sci-fi play-by-post roleplaying guild managed by my girlfriend. I found the symbols to be quite interesting looking and thought they would make good multi material print subjects. This particular symbol is of Bokoto.…
To wszystkie aktualnie dostępne wyniki.
