P
PrintablesLee David
Bambu Labs P1P POOPY SHOE
The frame and panels are different for the P1P vs X1. Remixed to fit a square corner. Sorry, I smoothed the original the best I could to reduce file size.
- Pobrania
- 1577
- Polubienia
- 193
- Ocena
- 4,78
Wszystkie modele
Liczymy pasujące modele…
P
PrintablesLee David
Corner Bed Locator for Anycubic Kobra 2 Max w/ cable management
It is not easy to locate the bed on a 420x420 machine. I have designed this locator to fit the Anycubic Kobra 2 Max. Note: 2 models the difference is the clearance on the side to the gantry/motor. Some machines require a narrow model…
- Pobrania
- 833
- Polubienia
- 92
- Ocena
- 5
P
PrintablesLee David
Bambu Magnetic Adapter for Segmented Poo Chute Pipe
The original design was screwed onto the back of the printer. I wanted a magnet mount in case I needed to clean. This design uses (4) 6mm x 2.5mm magnets. This should fit all current Bambu machines, I have tested on X1C and P1P. 2023/8/10…
- Pobrania
- 810
- Polubienia
- 90
- Ocena
- 5
P
PrintablesLee David
3kg Spool Holder - Overture - Heavy Duty
I looked at many of the existing designs and wanted a heavy duty spool holder for an overture 3kg spool I purchased. I printed the body out of PETG and the rod out of ABS with 6 walls and 25% infill. The end of the rod is trapped to…
- Pobrania
- 745
- Polubienia
- 47
- Ocena
- 5
P
PrintablesLee David
Trading Card Top Loader Storage Box
A larger top loader storage box that will hold approx. 500 top loaders. You will need (6) M5 x 30mm screws for the hinges and latch.
- Pobrania
- 737
- Polubienia
- 101
- Ocena
- 5
P
PrintablesLee David
Groovy Fidget
Designed my own fidget with grooves on the outside making it groovy!
- Pobrania
- 555
- Polubienia
- 29
- Ocena
- 4,86
P
PrintablesLee David
Bed Level Grid Test for 420x420 Bed Kobra Max, Neptune Max
A simple test to verify corners and nozzle height. 9 test block, 50x50x0.1 set at 380x380 grid.
- Pobrania
- 554
- Polubienia
- 21
- Ocena
- 5
P
PrintablesLee David
Norelco One Blade Travel Case
I wanted a case to store all the components and the power cord. Used TPU for the seal and the hinges, PLA or PETG work good for the hinges as well. (6) M3 x 20mm screws will be required.
- Pobrania
- 507
- Polubienia
- 129
- Ocena
- 4,83
P
PrintablesLee David
Filament Refill Spacer for Bambu Spools and Inland Refills
Needed a spacer to take up the gap between the cardboard and the spool. This is for Bambu Spools that fit the AMS and Microcenter Inland filament refills. I printed from PETG with 3 walls and 20% infill, PLA should work fine.
- Pobrania
- 446
- Polubienia
- 64
- Ocena
- 4,67
P
PrintablesLee David
OurFather Cross Holder / Hanger
I wanted to give the OurFather Cross some depth and a way to hang on the wall easily.
- Pobrania
- 418
- Polubienia
- 107
- Ocena
- 4,75
P
PrintablesLee David
Wicker Basket Remix
I liked the original but there was some overhang issues. I changed the design to remove the area's I thought were a problem. The pictures are of a print from Numakers.com 25% wood filament.
- Pobrania
- 272
- Polubienia
- 39
- Ocena
- 5
P
PrintablesLee David
Inland Filament Refill Spacer for Bambu Refill Spool
I purchase refills when ever I can find them at a fair price. I wanted a better spacer for Inland refills. I keyed the spacer to line up with Bambu's notch in the refill spool. I printed out of Prusament ASA (free from printables.com) and…
- Pobrania
- 203
- Polubienia
- 26
- Ocena
- 5
P
PrintablesLee David
Direct Drive Indicator for Creality Sprite - Ender S1
I wanted an indicator for the sprite direct drive. You will need a 8mm diameter x 3mm thick magnet. I used super glue to mount the magnet. I found the magnets on Amazon.
- Pobrania
- 189
- Polubienia
- 26
- Ocena
- 0
P
PrintablesLee David
iPad Stand with Pencil Holder
I wanted a stand that would also hold the pencil. I designed 2 different models, with and without iPad case. Tested with a 10th gen iPad.
- Pobrania
- 178
- Polubienia
- 18
- Ocena
- 0
P
PrintablesLee David
Bambu AMS Spool Support for GST3D Spools and Similar
This design snaps onto the spool to give it support. I printed with PETG, no support required. Printed on an Ender 5 Plus.
- Pobrania
- 171
- Polubienia
- 26
- Ocena
- 4,33
P
PrintablesLee David
Dishwasher Status Indicator Dirty / Clean
Designed a simple indicator for the dishwasher. Uses (4) 16mmx2mm magnets or sticky pads to adhere to the dishwasher.
- Pobrania
- 164
- Polubienia
- 35
- Ocena
- 5
P
PrintablesLee David
Poo Spillway for Bambu P1 and X1 series for Poo off the back of the machine.
Needed a poo slide, I have designed others but there was still issues with poo hanging up. So I went big, designed the poo spillway. 2 versions 80mm and 120mm poo shute. Nothing is more important than proper poo routing.
- Pobrania
- 140
- Polubienia
- 20
- Ocena
- 0
P
PrintablesLee David
Hooks for the Home Depot Heavy Duty Red Rack
I needed a hook so I designed my own. There is 3 locking channels, left, right and side. I have a design for each. Fits my Home Depot Heavy Duty Red Rack.
- Pobrania
- 137
- Polubienia
- 22
- Ocena
- 5
P
PrintablesLee David
Bambu Super Poo Chute
I wanted a poo chute that I could fit into my setup. I designed different adapters and lengths to work in many situations. I used 8mm x 3mm magnets and 10mm rubber feet on the bridge support. Both I purchased from Amazon. The bridge…
- Pobrania
- 135
- Polubienia
- 26
- Ocena
- 5
P
PrintablesLee David
Power Cable Mounting Clip Screw Mount
I have a 8mm extension cord for exterior lights that I wanted to permanently mount. Designed this clip to work with a 4mm or #8 screw.
- Pobrania
- 117
- Polubienia
- 8
- Ocena
- 0
P
PrintablesLee David
Bambu Poo Slide
Was not happy with other designs I had found, I have created a few that needed help. This design is working the best and keeps the poo flowing! Works on X1, X1 Carbon and P1P from BambuLab.
- Pobrania
- 115
- Polubienia
- 33
- Ocena
- 5
P
PrintablesLee David
Only Prints Sign
I created a sign for our “Only Prints” club. It is layed so you can do color changes on a single extruder machine. I have included a basic stl, a painted Bambu and a large file for a Anycubic Kobra 2 Max. Enjoy!
- Pobrania
- 111
- Polubienia
- 31
- Ocena
- 5
P
PrintablesLee David
Sheet label and Printer Holder for Phomemo 241BT
A try to keep labels aligned, help them from being pushed off the desk. Designed to work with the Phomemo 241BT and similar.
- Pobrania
- 109
- Polubienia
- 7
- Ocena
- 0
P
PrintablesLee David
A1 Filament Wheel Extruder Indicator - Biohazard
I designed a Biohazard indictor for A1 and A1 Mini.
- Pobrania
- 107
- Polubienia
- 18
- Ocena
- 5
P
PrintablesLee David
Cardboard Spool Adapters for Bambu AMS
Tired of spool adapters that do not drive the spool, I have designed spool adapters for the cardboard spools I have today. As I purchase different brands I will add the list. I test each design in my AMS before uploading. Drive pins…
- Pobrania
- 101
- Polubienia
- 29
- Ocena
- 0
P
PrintablesLee David
Another Filament Spool Clip MKII
The others I tried just didn't work well for me, so I designed my own. I like printing them from PETG or ASA for flexibility and strength. 10-17-2023 - Uploaded Mark II More Bitey
- Pobrania
- 94
- Polubienia
- 8
- Ocena
- 5
P
PrintablesLee David
AMS / Filament Shelf for Lowe's Kobalt Heavy Duty Black Rack
AMS holder for the side of your rack. Also a great filament holder. Tested on a Lowe's Kobalt Heavy Duty Rack. Uses 1" PVC approx. 38" long, 2 pieces. Recommend measuring and cutting to size to fit your rack.
- Pobrania
- 85
- Polubienia
- 23
- Ocena
- 0
P
PrintablesLee David
Rebel Hitch Receiver Cover
I wanted to design a cover that was smaller than other designs, not as easy to hit on my truck.
- Pobrania
- 82
- Polubienia
- 27
- Ocena
- 5
P
PrintablesLee David
Essential Oils Storage Carrousel - Lazy Susan - Rotating
Designed in 3 parts and will require 85 ¼" or 6mm ball bearings. Will hold 32 1-¼" or 32mm diameter bottles.
- Pobrania
- 77
- Polubienia
- 9
- Ocena
- 0
P
PrintablesLee David
K2 Plus Poo Slide works with HKR Poo System
I love HKR Modular H2D Chute but I also have K2 Plus, so I made the K2 Plus slide to use the HKR Poop trays. See link below: HKR MODULAR H2D POOP CHUTE - NO HARDWARE REQUIRED by Hiro Koiso Racing MakerWorld: Download Free 3D Models This…
- Pobrania
- 71
- Polubienia
- 13
- Ocena
- 0
P
PrintablesLee David
Centauri Carbon Poo Slide Bucket Easy Empty
I use a similar design on my H2D which I love, so I designed one for the Elegoo Centauri Carbon. This design uses one of the feet to locate and secure the poo slide. The bucket is self-locating that is easy empty. The design does require…
- Pobrania
- 62
- Polubienia
- 9
- Ocena
- 0
P
PrintablesLee David
FLSun V400 Vibration Dampening Feet
Simple design using TPU and PETG to reduce the vibration from the FLSun V400 especially at high speeds.
- Pobrania
- 60
- Polubienia
- 11
- Ocena
- 0
P
PrintablesLee David
Polar Filament Cardboard Spool Spacer for Bambu Refillable Spools
Polar Filament's carboard spool edges were breaking down in the AMS. This spacer allows you to rip the sides off the Polar spool and install in a Bambu refillable spool. Some of the spools are tighter than others, I have included the step…
- Pobrania
- 58
- Polubienia
- 9
- Ocena
- 5
P
PrintablesLee David
SV08 Display Holder for 7" Big Tree Tech HDMI Display
I wanted a way to adjust the screen on my Sovol SV08 with the Big Tree Tech HDMI 7 screen. I found a very nice designed screen holder but no good mounts. My mount will require approx. 17" of ¾" ID PVC (26.7mm OD). I used schedule 40 PVC.…
- Pobrania
- 55
- Polubienia
- 13
- Ocena
- 5
P
PrintablesLee David
Scrapper holder to fit Bambu P1P Peg Board
Well another P1P accessory, this one is to hold a scrapper (putty knife) on the Bambu designed peg board.
- Pobrania
- 53
- Polubienia
- 11
- Ocena
- 0
P
PrintablesLee David
Display Holder for FLSun V400 works with enclosure
Easy to use Display Stand that can be adjusted for viewing. You will need (4) M5x 24 or longer Button Head or Cap Screws and (4) M5 nuts.
- Pobrania
- 53
- Polubienia
- 8
- Ocena
- 0
P
PrintablesLee David
A1 Fire Extinguisher with Flames
Just having some fun with the A1 cable situation, remixed a model from Thingiverse.com. Enjoy!
- Pobrania
- 43
- Polubienia
- 10
- Ocena
- 0
P
PrintablesLee David
BMW Wall Light
You will need a string of LED lights, I found some on AliExpress. I used Commander strips to secure to the wall.
- Pobrania
- 41
- Polubienia
- 10
- Ocena
- 0
P
PrintablesLee David
JPrusa Filament Indicator Extruder Wheel for Bambu A1
Would you like Prusa's likeness spinning around as you extrude filament from you A1 or A1 Mini? If yes then this is the indicator for you! To get the detail I had to go to a 0.2 nozzle on the A1.
- Pobrania
- 38
- Polubienia
- 6
- Ocena
- 0
P
PrintablesLee David
AMS Lite Kobalt Rack Rail Mount
I created a model to mount the AMS Lite to the rail of the Lowes Kobalt Black Rack. You will need: (6) M5 brass inserts (4) M5x10 Button Head Cap Screws (2) M5x12 Cap Screws The AMS Lite top mount mounting screw kit.
- Pobrania
- 38
- Polubienia
- 12
- Ocena
- 5
P
PrintablesLee David
Red Rack AMS Lite Rail Mount for Home Depot Heavy Duty Rack
I created a model to mount the AMS Lite to the rail of the Home Depot Heavy Duty Rack. You will need: (6) M5 brass inserts (4) M5x10 Button Head Cap Screws (2) M5x12 Cap Screws The AMS Lite top mount mounting screw kit.
- Pobrania
- 32
- Polubienia
- 6
- Ocena
- 0
P
PrintablesLee David
Veg Chopper Blade Storage Box
Needed a storage box for the blades of the TikTok Vegetable chopper. Requires 6 M3 x 25mm long screws.
- Pobrania
- 30
- Polubienia
- 9
- Ocena
- 0
P
PrintablesLee David
AMS Shelf for Home Depot Red Rack
Move your AMS to the side of your Home Depot Heavy Duty Red Rack. You will need 1" PVC pipe to span the distance. Recommend PETG, 5 walls and 0.20mm layer height. 2024-3-5 Updated - Added wide mount version. Not all AMS slots are the…
- Pobrania
- 28
- Polubienia
- 10
- Ocena
- 0
P
PrintablesLee David
Moen Magnetix Shower Head Adapter
I have a Moen Magnetix shower head which is OK. I purchased a cheap Tiktok shower head that suprisingly works very well. I designed an adapter for the Magnetix system. This adapter uses a 30mm x 3mm magnet that I assembled with super…
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
PrintablesLee David
3kg Filament Spool Lazy Susan Spool Holder
Heavy Duty 3KG spool holder (tested with over 5kg). Removeable center hub for different spool hole sizes Center screw can be adjusted to apply drag to the bearings so filament doesn't wind off to fast. Parts Needed Needle Roller Bearing…
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLee David
Red Rack Modular Adapter
This is an adapter for thingiverse.com model https://www.thingiverse.com/thing:2194278 an adapter for the Home Depot Heavy Duty Rack.
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLee David
Adjustable Display Holder for FLSun V400
An adjustable display holder for the FLSun V400. You will need: Approx. 37" of ¾" PVC, 26.5mm OD. (4) M2.5x10mm Button Head Cap Screws & Nuts (1) M6 x 30mm Hex Bolt and Nut (Longer OK) (1) M6 x 40mm Hex Bolt and Nut (longer OK) Optional…
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLee David
Hygrometer and Temp Display for Hex Storage Wall
A simple holder for the Hygrometer. You can find the Hygrometer I used at the link: https://a.co/d/acYbBm6
- Pobrania
- 13
- Polubienia
- 4
- Ocena
- 0
To wszystkie aktualnie dostępne wyniki.